Physics:Microfluidics

From HandWiki
Short description: Interdisciplinary science

Microfluidics refers to a system that manipulates a small amount of fluids (10−9 to 10−18 liters) using small channels with sizes ten to hundreds micrometres. It is a multidisciplinary field that involves molecular analysis, molecular biology, and microelectronics.[1] It has practical applications in the design of systems that process low volumes of fluids to achieve multiplexing, automation, and high-throughput screening. Microfluidics emerged in the beginning of the 1980s and is used in the development of inkjet printheads, DNA chips, lab-on-a-chip technology, micro-propulsion, and micro-thermal technologies.

Typically, micro means one of the following features:

  • Small volumes (μL, nL, pL, fL)
  • Small size
  • Low energy consumption
  • Microdomain effects

Typically microfluidic systems transport, mix, separate, or otherwise process fluids. Various applications rely on passive fluid control using capillary forces, in the form of capillary flow modifying elements, akin to flow resistors and flow accelerators. In some applications, external actuation means are additionally used for a directed transport of the media. Examples are rotary drives applying centrifugal forces for the fluid transport on the passive chips. Active microfluidics refers to the defined manipulation of the working fluid by active (micro) components such as micropumps or microvalves. Micropumps supply fluids in a continuous manner or are used for dosing. Microvalves determine the flow direction or the mode of movement of pumped liquids. Often, processes normally carried out in a lab are miniaturised on a single chip, which enhances efficiency and mobility, and reduces sample and reagent volumes.

Microscale behaviour of fluids

Silicone rubber and glass microfluidic devices. Top: a photograph of the devices. Bottom: Phase contrast micrographs of a serpentine channel ~15 μm wide.

The behaviour of fluids at the microscale can differ from "macrofluidic" behaviour in that factors such as surface tension, energy dissipation, and fluidic resistance start to dominate the system. Microfluidics studies how these behaviours change, and how they can be worked around, or exploited for new uses.[2][3][4][5][6]

At small scales (channel size of around 100 nanometers to 500 micrometers) some interesting and sometimes unintuitive properties appear. In particular, the Reynolds number (which compares the effect of the momentum of a fluid to the effect of viscosity) can become very low. A key consequence is co-flowing fluids do not necessarily mix in the traditional sense, as flow becomes laminar rather than turbulent; molecular transport between them must often be through diffusion.[7]

High specificity of chemical and physical properties (concentration, pH, temperature, shear force, etc.) can also be ensured resulting in more uniform reaction conditions and higher grade products in single and multi-step reactions.[8][9]

Various kinds of microfluidic flows

Microfluidic flows need only be constrained by geometrical length scale – the modalities and methods used to achieve such a geometrical constraint are highly dependent on the targeted application.[10] Traditionally, microfluidic flows have been generated inside closed channels with the channel cross section being in the order of 10 μm x 10 μm. Each of these methods has its own associated techniques to maintain robust fluid flow which have matured over several years.[citation needed]

Open microfluidics

The behavior of fluids and their control in open microchannels was pioneered around 2005[11] and applied in air-to-liquid sample collection[12][13] and chromatography.[14] In open microfluidics, at least one boundary of the system is removed, exposing the fluid to air or another interface (i.e. liquid).[15][16][17] Advantages of open microfluidics include accessibility to the flowing liquid for intervention, larger liquid-gas surface area, and minimized bubble formation.[18][15][17][19] Another advantage of open microfluidics is the ability to integrate open systems with surface-tension driven fluid flow, which eliminates the need for external pumping methods such as peristaltic or syringe pumps.[20] Open microfluidic devices are also easy and inexpensive to fabricate by milling, thermoforming, and hot embossing.[21][22][23][24] In addition, open microfluidics eliminates the need to glue or bond a cover for devices, which could be detrimental to capillary flows. Examples of open microfluidics include open-channel microfluidics, rail-based microfluidics, paper-based, and thread-based microfluidics.[15][20][25] Disadvantages to open systems include susceptibility to evaporation,[26] contamination,[27] and limited flow rate.[17]

Continuous-flow microfluidics

Continuous flow microfluidics rely on the control of a steady state liquid flow through narrow channels or porous media predominantly by accelerating or hindering fluid flow in capillary elements.[28] In paper based microfluidics, capillary elements can be achieved through the simple variation of section geometry. In general, the actuation of liquid flow is implemented either by external pressure sources, external mechanical pumps, integrated mechanical micropumps, or by combinations of capillary forces and electrokinetic mechanisms.[29][30] Continuous-flow microfluidic operation is the mainstream approach because it is easy to implement and less sensitive to protein fouling problems. Continuous-flow devices are adequate for many well-defined and simple biochemical applications, and for certain tasks such as chemical separation, but they are less suitable for tasks requiring a high degree of flexibility or fluid manipulations. These closed-channel systems are inherently difficult to integrate and scale because the parameters that govern flow field vary along the flow path making the fluid flow at any one location dependent on the properties of the entire system. Permanently etched microstructures also lead to limited reconfigurability and poor fault tolerance capability. Computer-aided design automation approaches for continuous-flow microfluidics have been proposed in recent years to alleviate the design effort and to solve the scalability problems.[31]

micro fluid sensor

Process monitoring capabilities in continuous-flow systems can be achieved with highly sensitive microfluidic flow sensors based on MEMS technology, which offers resolutions down to the nanoliter range.[32]

Droplet-based microfluidics

Main page: Physics:Droplet-based microfluidics

File:Gas4psi LONDs26uLmin-1 50kfps x10lens.webm

Droplet-based microfluidics is a subcategory of microfluidics in contrast with continuous microfluidics; droplet-based microfluidics manipulates discrete volumes of fluids in immiscible phases with low Reynolds number and laminar flow regimes. Interest in droplet-based microfluidics systems has been growing substantially in past decades. Microdroplets allow for handling miniature volumes (μl to fl) of fluids conveniently, provide better mixing, encapsulation, sorting, and sensing, and suit high throughput experiments.[34] Exploiting the benefits of droplet-based microfluidics efficiently requires a deep understanding of droplet generation[35] to perform various logical operations[36][37] such as droplet manipulation,[38] droplet sorting,[39] droplet merging,[40] and droplet breakup.[41]

Digital microfluidics

Main page: Physics:Digital microfluidics

Alternatives to the above closed-channel continuous-flow systems include novel open structures, where discrete, independently controllable droplets are manipulated on a substrate using electrowetting. Following the analogy of digital microelectronics, this approach is referred to as digital microfluidics. Le Pesant et al. pioneered the use of electrocapillary forces to move droplets on a digital track.[42] The "fluid transistor" pioneered by Cytonix[43] also played a role. The technology was subsequently commercialised by Duke University. By using discrete unit-volume droplets,[35] a microfluidic function can be reduced to a set of repeated basic operations, i.e., moving one unit of fluid over one unit of distance. This "digitisation" method facilitates the use of a hierarchical and cell-based approach for microfluidic biochip design. Therefore, digital microfluidics offers a flexible and scalable system architecture as well as high fault-tolerance capability. Moreover, because each droplet can be controlled independently, these systems also have dynamic reconfigurability, whereby groups of unit cells in a microfluidic array can be reconfigured to change their functionality during the concurrent execution of a set of bioassays. Although droplets are manipulated in confined microfluidic channels, since the control on droplets is not independent, it should not be confused as "digital microfluidics". One common actuation method for digital microfluidics is electrowetting-on-dielectric (EWOD).[44] Many lab-on-a-chip applications have been demonstrated within the digital microfluidics paradigm using electrowetting. However, recently other techniques for droplet manipulation have also been demonstrated using magnetic force,[45] surface acoustic waves,[46] optoelectrowetting, mechanical actuation,[47] etc.

Paper-based microfluidics

Main page: Physics:Paper-based microfluidics

Paper-based microfluidic devices fill a growing niche for portable, cheap, and user-friendly medical diagnostic systems.[48] Paper based microfluidics rely on the phenomenon of capillary penetration in porous media.[49] To tune fluid penetration in porous substrates such as paper in two and three dimensions, the pore structure, wettability and geometry of the microfluidic devices can be controlled while the viscosity and evaporation rate of the liquid play a further significant role. Many such devices feature hydrophobic barriers on hydrophilic paper that passively transport aqueous solutions to outlets where biological reactions take place.[50] Paper-based microfluidics are considered as portable point-of-care biosensors used in a remote setting where advanced medical diagnostic tools are not accessible.[51] Current applications include portable glucose detection[52] and environmental testing,[53] with hopes of reaching areas that lack advanced medical diagnostic tools.

Particle detection microfluidics

One application area that has seen significant academic effort and some commercial effort is in the area of particle detection in fluids. Particle detection of small fluid-borne particles down to about 1 μm in diameter is typically done using a Coulter counter, in which electrical signals are generated when a weakly-conducting fluid such as in saline water is passed through a small (~100 μm diameter) pore, so that an electrical signal is generated that is directly proportional to the ratio of the particle volume to the pore volume. The physics behind this is relatively simple, described in a classic paper by DeBlois and Bean,[54] and the implementation first described in Coulter's original patent.[55] This is the method used to e.g. size and count erythrocytes (red blood cells [wiki]) as well as leukocytes (white blood cells) for standard blood analysis. The generic term for this method is resistive pulse sensing (RPS); Coulter counting is a trademark term. However, the RPS method does not work well for particles below 1 μm diameter, as the signal-to-noise ratio falls below the reliably detectable limit, set mostly by the size of the pore in which the analyte passes and the input noise of the first-stage amplifier.[citation needed]

The limit on the pore size in traditional RPS Coulter counters is set by the method used to make the pores, which while a trade secret, most likely[according to whom?] uses traditional mechanical methods. This is where microfluidics can have an impact: The lithography-based production of microfluidic devices, or more likely the production of reusable molds for making microfluidic devices using a molding process, is limited to sizes much smaller than traditional machining. Critical dimensions down to 1 μm are easily fabricated, and with a bit more effort and expense, feature sizes below 100 nm can be patterned reliably as well. This enables the inexpensive production of pores integrated in a microfluidic circuit where the pore diameters can reach sizes of order 100 nm, with a concomitant reduction in the minimum particle diameters by several orders of magnitude.

As a result there has been some university-based development of microfluidic particle counting and sizing[56][57][58][59][60][61][62][63][64][65] [excessive citations]with the accompanying commercialization of this technology. This method has been termed microfluidic resistive pulse sensing (MRPS).

Microfluidic-assisted magnetophoresis

One major area of application for microfluidic devices is the separation and sorting of different fluids or cell types. Recent developments in the microfluidics field have seen the integration of microfluidic devices with magnetophoresis: the migration of particles by a magnetic field.[66] This can be accomplished by sending a fluid containing at least one magnetic component through a microfluidic channel that has a magnet positioned along the length of the channel. This creates a magnetic field inside the microfluidic channel which draws magnetically active substances towards it, effectively separating the magnetic and non-magnetic components of the fluid. This technique can be readily utilized in industrial settings where the fluid at hand already contains magnetically active material. For example, a handful of metallic impurities can find their way into certain consumable liquids, namely milk and other dairy products.[67] Conveniently, in the case of milk, many of these metal contaminants exhibit paramagnetism. Therefore, before packaging, milk can be flowed through channels with magnetic gradients as a means of purifying out the metal contaminants.

Other, more research-oriented applications of microfluidic-assisted magnetophoresis are numerous and are generally targeted towards cell separation. The general way this is accomplished involves several steps. First, a paramagnetic substance (usually micro/nanoparticles or a paramagnetic fluid)[68] needs to be functionalized to target the cell type of interest. This can be accomplished by identifying a transmembranal protein unique to the cell type of interest and subsequently functionalizing magnetic particles with the complementary antigen or antibody.[67][69][70][71][72] Once the magnetic particles are functionalized, they are dispersed in a cell mixture where they bind to only the cells of interest. The resulting cell/particle mixture can then be flowed through a microfluidic device with a magnetic field to separate the targeted cells from the rest.

Conversely, microfluidic-assisted magnetophoresis may be used to facilitate efficient mixing within microdroplets or plugs. To accomplish this, microdroplets are injected with paramagnetic nanoparticles and are flowed through a straight channel which passes through rapidly alternating magnetic fields. This causes the magnetic particles to be quickly pushed from side to side within the droplet and results in the mixing of the microdroplet contents.[71] This eliminates the need for tedious engineering considerations that are necessary for traditional, channel-based droplet mixing. Other research has also shown that the label-free separation of cells may be possible by suspending cells in a paramagnetic fluid and taking advantage of the magneto-Archimedes effect.[73][74] While this does eliminate the complexity of particle functionalization, more research is needed to fully understand the magneto-Archimedes phenomenon and how it can be used to this end. This is not an exhaustive list of the various applications of microfluidic-assisted magnetophoresis; the above examples merely highlight the versatility of this separation technique in both current and future applications.

Key application areas

Microfluidic structures include micropneumatic systems, i.e. microsystems for the handling of off-chip fluids (liquid pumps, gas valves, etc.), and microfluidic structures for the on-chip handling of nanoliter (nl) and picoliter (pl) volumes.[75] To date, the most successful commercial application of microfluidics is the inkjet printhead.[76] Additionally, microfluidic manufacturing advances mean that makers can produce the devices in low-cost plastics[77] and automatically verify part quality.[78]


Advances in microfluidics technology are revolutionizing molecular biology procedures for enzymatic analysis (e.g., glucose and lactate assays), DNA analysis (e.g., polymerase chain reaction and high-throughput sequencing), proteomics, and in chemical synthesis.[28][79] The basic idea of microfluidic biochips is to integrate assay operations such as detection, as well as sample pre-treatment and sample preparation on one chip.[80][81]

An emerging application area for biochips is clinical pathology, especially the immediate point-of-care diagnosis of diseases.[82] In addition, microfluidics-based devices, capable of continuous sampling and real-time testing of air/water samples for biochemical toxins and other dangerous pathogens,[83] can serve as an always-on "bio-smoke alarm" for early warning.

Microfluidic technology has led to the creation of powerful tools for biologists to control the complete cellular environment, leading to new questions and discoveries. Many diverse advantages of this technology for microbiology are listed below:

  • General single cell studies including growth[84][34]
  • Cellular aging: microfluidic devices such as the "mother machine" allow tracking of thousands of individual cells for many generations until they die[84]
  • Microenvironmental control: ranging from mechanical environment[85] to chemical environment[86][87]
  • Precise spatiotemporal concentration gradients by incorporating multiple chemical inputs to a single device[88]
  • Force measurements of adherent cells or confined chromosomes: objects trapped in a microfluidic device can be directly manipulated using optical tweezers or other force-generating methods[89]
  • Confining cells and exerting controlled forces by coupling with external force-generation methods such as Stokes flow, optical tweezer, or controlled deformation of the PDMS (Polydimethylsiloxane) device[89][90][91]
  • Electric field integration[91]
  • Plant on a chip and plant tissue culture[92]
  • Antibiotic resistance: microfluidic devices can be used as heterogeneous environments for microorganisms. In a heterogeneous environment, it is easier for a microorganism to evolve. This can be useful for testing the acceleration of evolution of a microorganism / for testing the development of antibiotic resistance.

Some of these areas are further elaborated in the sections below:

DNA chips (microarrays)

Early biochips were based on the idea of a DNA microarray, e.g., the GeneChip DNAarray from Affymetrix, which is a piece of glass, plastic or silicon substrate, on which pieces of DNA (probes) are affixed in a microscopic array. Similar to a DNA microarray, a protein array is a miniature array where a multitude of different capture agents, most frequently monoclonal antibodies, are deposited on a chip surface; they are used to determine the presence and/or amount of proteins in biological samples, e.g., blood. A drawback of DNA and protein arrays is that they are neither reconfigurable nor scalable after manufacture. Digital microfluidics has been described as a means for carrying out Digital PCR.

Molecular biology

In addition to microarrays, biochips have been designed for two-dimensional electrophoresis,[93] transcriptome analysis,[94] and PCR amplification.[95] Other applications include various electrophoresis and liquid chromatography applications for proteins and DNA, cell separation, in particular, blood cell separation, protein analysis, cell manipulation and analysis including cell viability analysis[34] and microorganism capturing.[81]

Evolutionary biology

By combining microfluidics with landscape ecology and nanofluidics, a nano/micro fabricated fluidic landscape can be constructed by building local patches of bacterial habitat and connecting them by dispersal corridors. The resulting landscapes can be used as physical implementations of an adaptive landscape,[96] by generating a spatial mosaic of patches of opportunity distributed in space and time. The patchy nature of these fluidic landscapes allows for the study of adapting bacterial cells in a metapopulation system. The evolutionary ecology of these bacterial systems in these synthetic ecosystems allows for using biophysics to address questions in evolutionary biology.

Cell behavior

Main page: Biology:Microfluidic cell culture

The ability to create precise and carefully controlled chemoattractant gradients makes microfluidics the ideal tool to study motility,[97] chemotaxis and the ability to evolve / develop resistance to antibiotics in small populations of microorganisms and in a short period of time. These microorganisms including bacteria[98] and the broad range of organisms that form the marine microbial loop,[99] responsible for regulating much of the oceans' biogeochemistry.

Microfluidics has also greatly aided the study of durotaxis by facilitating the creation of durotactic (stiffness) gradients.

Cellular biophysics

By rectifying the motion of individual swimming bacteria,[100] microfluidic structures can be used to extract mechanical motion from a population of motile bacterial cells.[101] This way, bacteria-powered rotors can be built.[102][103]

Optics

The merger of microfluidics and optics is typical known as optofluidics. Examples of optofluidic devices are tunable microlens arrays[104][105] and optofluidic microscopes.

Microfluidic flow enables fast sample throughput, automated imaging of large sample populations, as well as 3D capabilities.[106][107] or superresolution.[108]

Photonics Lab on a Chip (PhLOC)

Due to the increase in safety concerns and operating costs of common analytic methods (ICP-MS, ICP-AAS, and ICP-OES[109]), the Photonics Lab on a Chip (PhLOC) is becoming an increasingly popular tool for the analysis of actinides and nitrates in spent nuclear waste. The PhLOC is based on the simultaneous application of Raman and UV-Vis-NIR spectroscopy,[110] which allows for the analysis of more complex mixtures which contain several actinides at different oxidation states.[111] Measurements made with these methods have been validated at the bulk level for industrial tests,[109][112] and are observed to have a much lower variance at the micro-scale.[113] This approach has been found to have molar extinction coefficients (UV-Vis) in line with known literature values over a comparatively large concentration span for 150 μL[111] via elongation of the measurement channel, and obeys Beer's Law at the micro-scale for U(IV).[114] Through the development of a spectrophotometric approach to analyzing spent fuel, an on-line method for measurement of reactant quantities is created, increasing the rate at which samples can be analyzed and thus decreasing the size of deviations detectable within reprocessing.[112]

Through the application of the PhLOC, flexibility and safety of operational methods are increased. Since the analysis of spent nuclear fuel involves extremely harsh conditions, the application of disposable and rapidly produced devices (Based on castable and/or engravable materials such as PDMS, PMMA, and glass[115]) is advantageous, although material integrity must be considered under specific harsh conditions.[114] Through the usage of fiber optic coupling, the device can be isolated from instrumentation, preventing irradiative damage and minimizing the exposure of lab personnel to potentially harmful radiation, something not possible on the lab scale nor with the previous standard of analysis.[111] The shrinkage of the device also allows for lower amounts of analyte to be used, decreasing the amount of waste generated and exposure to hazardous materials.[111]

Expansion of the PhLOC to miniaturize research of the full nuclear fuel cycle is currently being evaluated, with steps of the PUREX process successfully being demonstrated at the micro-scale.[110] Likewise, the microfluidic technology developed for the analysis of spent nuclear fuel is predicted to expand horizontally to analysis of other actinide, lanthanides, and transition metals with little to no modification.[111]

High Performance Liquid Chromatography (HPLC)

HPLC in the field of microfluidics comes in two different forms. Early designs included running liquid through the HPLC column then transferring the eluted liquid to microfluidic chips and attaching HPLC columns to the microfluidic chip directly.[116] The early methods had the advantage of easier detection from certain machines like those that measure fluorescence.[117] More recent designs have fully integrated HPLC columns into microfluidic chips. The main advantage of integrating HPLC columns into microfluidic devices is the smaller form factor that can be achieved, which allows for additional features to be combined within one microfluidic chip. Integrated chips can also be fabricated from multiple different materials, including glass and polyimide which are quite different from the standard material of PDMS used in many different droplet-based microfluidic devices.[118][119] This is an important feature because different applications of HPLC microfluidic chips may call for different pressures. PDMS fails in comparison for high-pressure uses compared to glass and polyimide. High versatility of HPLC integration ensures robustness by avoiding connections and fittings between the column and chip.[120] The ability to build off said designs in the future allows the field of microfluidics to continue expanding its potential applications.

The potential applications surrounding integrated HPLC columns within microfluidic devices have proven expansive over the last 10–15 years. The integration of such columns allows for experiments to be run where materials were in low availability or very expensive, like in biological analysis of proteins. This reduction in reagent volumes allows for new experiments like single-cell protein analysis, which due to size limitations of prior devices, previously came with great difficulty.[121] The coupling of HPLC-chip devices with other spectrometry methods like mass-spectrometry allow for enhanced confidence in identification of desired species, like proteins.[122] Microfluidic chips have also been created with internal delay-lines that allow for gradient generation to further improve HPLC, which can reduce the need for further separations.[123] Some other practical applications of integrated HPLC chips include the determination of drug presence in a person through their hair[124] and the labeling of peptides through reverse phase liquid chromatography.[125]

Acoustic droplet ejection (ADE)

Acoustic droplet ejection uses a pulse of ultrasound to move low volumes of fluids (typically nanoliters or picoliters) without any physical contact. This technology focuses acoustic energy into a fluid sample to eject droplets as small as a millionth of a millionth of a litre (picoliter = 10−12 litre). ADE technology is a very gentle process, and it can be used to transfer proteins, high molecular weight DNA and live cells without damage or loss of viability. This feature makes the technology suitable for a wide variety of applications including proteomics and cell-based assays.

Fuel cells

Further information: Physics:Electroosmotic pump

Microfluidic fuel cells can use laminar flow to separate the fuel and its oxidant to control the interaction of the two fluids without the physical barrier that conventional fuel cells require.[126][127][128]

Astrobiology

To understand the prospects for life to exist elsewhere in the universe, astrobiologists are interested in measuring the chemical composition of extraplanetary bodies.[129] Because of their small size and wide-ranging functionality, microfluidic devices are uniquely suited for these remote sample analyses.[130][131][132] From an extraterrestrial sample, the organic content can be assessed using microchip capillary electrophoresis and selective fluorescent dyes.[133] These devices are capable of detecting amino acids,[134] peptides,[135] fatty acids,[136] and simple aldehydes, ketones,[137] and thiols.[138] These analyses coupled together could allow powerful detection of the key components of life, and hopefully inform our search for functioning extraterrestrial life.[139]

Food science

Microfluidic techniques such as droplet microfluidics, paper microfluidics, and lab-on-a-chip are used in the realm of food science in a variety of categories.[140] Research in nutrition,[141][142] food processing, and food safety benefit from microfluidic technique because experiments can be done with less reagents.[140]

Food processing requires the ability to enable shelf stability in foods, such as emulsions or additions of preservatives. Techniques such as droplet microfluidics are used to create emulsions that are more controlled and complex than those created by traditional homogenization due to the precision of droplets that is achievable. Using microfluidics for emulsions is also more energy efficient compared to homogenization in which “only 5% of the supplied energy is used to generate the emulsion, with the rest dissipated as heat” .[143] Although these methods have benefits, they currently lack the ability to be produced at large scale that is needed for commercialization.[144] Microfluidics are also used in research as they allow for innovation in food chemistry and food processing.[140][144] An example in food engineering research is a novel micro-3D-printed device fabricated to research production of droplets for potential food processing industry use, particularly in work with enhancing emulsions.[145]

Paper and droplet microfluidics allow for devices that can detect small amounts of unwanted bacteria or chemicals, making them useful in food safety and analysis.[146] Paper-based microfluidic devices are often referred to as microfluidic paper-based analytical devices (µPADs) and can detect such things as nitrate,[147] preservatives,[148] or antibiotics[149] in meat by a colorimetric reaction that can be detected with a smartphone. These methods are being researched because they use less reactants, space, and time compared to traditional techniques such as liquid chromatography. µPADs also make home detection tests possible , which is of interest to those with allergies and intolerances.[147] In addition to paper-based methods, research demonstrates droplet-based microfluidics shows promise in drastically shortening the time necessary to confirm viable bacterial contamination in agricultural waters in the domestic and international food industry.[146]

Future directions

Microfluidics for personalized cancer treatment

Personalized cancer treatment is a tuned method based on the patient's diagnosis and background. Microfluidic technology offers sensitive detection with higher throughput, as well as reduced time and costs. For personalized cancer treatment, tumor composition and drug sensitivities are very important.[150]

A patient's drug response can be predicted based on the status of biomarkers, or the severity and progression of the disease can be predicted based on the atypical presence of specific cells.[151] Drop-qPCR is a droplet microfluidic technology in which droplets are transported in a reusable capillary and alternately flow through two areas maintained at different constant temperatures and fluorescence detection. It can be efficient with a low contamination risk to detect Her2.[150] A digital droplet‐based PCR method can be used to detect the KRAS mutations with TaqMan probes, to enhance detection of the mutative gene ratio.[152] In addition, accurate prediction of postoperative disease progression in breast or prostate cancer patients is essential for determining post-surgery treatment. A simple microfluidic chamber, coated with a carefully formulated extracellular matrix mixture is used for cells obtained from tumor biopsy after 72 hours of growth and a thorough evaluation of cells by imaging.[153]

Microfluidics is also suitable for circulating tumor cells (CTCs) and non-CTCs liquid biopsy analysis. Beads conjugate to anti‐epithelial cell adhesion molecule (EpCAM) antibodies for positive selection in the CTCs isolation chip (iCHIP).[154] CTCs can also be detected by using the acidification of the tumor microenvironment and the difference in membrane capacitance.[155][156] CTCs are isolated from blood by a microfluidic device, and are cultured on-chip, which can be a method to capture more biological information in a single analysis. For example, it can be used to test the cell survival rate of 40 different drugs or drug combinations.[157] Tumor‐derived extracellular vesicles can be isolated from urine and detected by an integrated double‐filtration microfluidic device; they also can be isolated from blood and detected by electrochemical sensing method with a two‐level amplification enzymatic assay.[158][159]

Tumor materials can directly be used for detection through microfluidic devices. To screen primary cells for drugs, it is often necessary to distinguish cancerous cells from non-cancerous cells. A microfluidic chip based on the capacity of cells to pass small constrictions can sort the cell types, metastases.[160] Droplet‐based microfluidic devices have the potential to screen different drugs or combinations of drugs, directly on the primary tumor sample with high accuracy. To improve this strategy, the microfluidic program with a sequential manner of drug cocktails, coupled with fluorescent barcodes, is more efficient.[161] Another advanced strategy is detecting growth rates of single-cell by using suspended microchannel resonators, which can predict drug sensitivities of rare CTCs.[162]

Microfluidics devices also can simulate the tumor microenvironment, to help to test anticancer drugs. Microfluidic devices with 2D or 3D cell cultures can be used to analyze spheroids for different cancer systems (such as lung cancer and ovarian cancer), and are essential for multiple anti-cancer drugs and toxicity tests. This strategy can be improved by increasing the throughput and production of spheroids. For example, one droplet-based microfluidic device for 3D cell culture produces 500 spheroids per chip.[163] These spheroids can be cultured longer in different surroundings to analyze and monitor. The other advanced technology is organs‐on‐a‐chip, and it can be used to simulate several organs to determine the drug metabolism and activity based on vessels mimicking, as well as mimic pH, oxygen... to analyze the relationship between drugs and human organ surroundings.[163]

A recent strategy is single-cell chromatin immunoprecipitation (ChiP)‐Sequencing in droplets, which operates by combining droplet‐based single cell RNA sequencing with DNA‐barcoded antibodies, possibly to explore the tumor heterogeneity by the genotype and phenotype to select the personalized anti-cancer drugs and prevent the cancer relapse.[164]

See also

References

  1. ↑ Whitesides, George M. (July 2006). "The origins and the future of microfluidics" (in en). Nature 442 (7101): 368–373. doi:10.1038/nature05058. ISSN 0028-0836. PMID 16871203. Bibcode: 2006Natur.442..368W. http://www.nature.com/articles/nature05058. 
  2. ↑ "A gas chromatographic air analyzer fabricated on a silicon wafer.". IEEE Transactions on Electron Devices 26 (12): 1880–6. December 1979. doi:10.1109/T-ED.1979.19791. Bibcode: 1979ITED...26.1880T. 
  3. ↑ Micro- and Nanoscale Fluid Mechanics: Transport in Microfluidic Devices. Cambridge University Press. 2010. http://www.kirbyresearch.com/textbook. Retrieved 2010-02-13. 
  4. ↑ Microflows and Nanoflows. Springer Verlag. 2005. 
  5. ↑ Theoretical Microfluidics. Oxford University Press. 2007. 
  6. ↑ Principles of Microfluidics. 2019. ISBN 978-1790217281. 
  7. ↑ Introduction to Microfluidics. Oxford University Press. 2005. ISBN 978-0-19-856864-3. https://archive.org/details/introductiontomi0000tabe. 
  8. ↑ "Optimized droplet-based microfluidics scheme for sol-gel reactions". Lab on a Chip 10 (13): 1700–1705. July 2010. doi:10.1039/b926976b. PMID 20405061. 
  9. ↑ "Multi-step synthesis of nanoparticles performed on millisecond time scale in a microfluidic droplet-based system". Lab on a Chip 4 (4): 316–321. August 2004. doi:10.1039/b403378g. PMID 15269797. https://authors.library.caltech.edu/40869/. 
  10. ↑ "Three-Dimensional–Printed Laboratory-on-a-Chip With Microelectronics and Silicon Integration". Point of Care 16 (2): 97–101. June 2017. doi:10.1097/POC.0000000000000132. https://cronfa.swan.ac.uk/Record/cronfa34529. 
  11. ↑ "Behaviour and design considerations for continuous flow closed-open-closed liquid microchannels". Lab on a Chip 5 (6): 682–686. June 2005. doi:10.1039/b501781e. PMID 15915262. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-14775. 
  12. ↑ "A micromachined interface for airborne sample-to-liquid transfer and its application in a biosensor system". Lab on a Chip 6 (12): 1504–1509. December 2006. doi:10.1039/B612526N. PMID 17203153. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-14188. 
  13. ↑ "An integrated QCM-based narcotics sensing microsystem". Lab on a Chip 8 (10): 1648–1657. October 2008. doi:10.1039/b800487k. PMID 18813386. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-14189. 
  14. ↑ "Off-line integration of CE and MALDI-MS using a closed-open-closed microchannel system". Electrophoresis 28 (14): 2458–2465. July 2007. doi:10.1002/elps.200600735. PMID 17577881. 
  15. ↑ 15.0 15.1 15.2 Open Microfluidics. 2016-08-01. doi:10.1002/9781118720936. ISBN 9781118720936. 
  16. ↑ "Trends in microfluidics with complex fluids". ChemPhysChem 4 (12): 1291–1298. December 2003. doi:10.1002/cphc.200300847. PMID 14714376. https://ris.utwente.nl/ws/files/6488126/trends_in_microfluidics.pdf. 
  17. ↑ 17.0 17.1 17.2 "Microfluidics in the "open space" for performing localized chemistry on biological interfaces". Angewandte Chemie 51 (45): 11224–11240. November 2012. doi:10.1002/anie.201201798. PMID 23111955. 
  18. ↑ Lade, R. K.; Jochem, K. S.; Macosko, C. W.; Francis, L. F. (2018). "Capillary Coatings: Flow and Drying Dynamics in Open Microchannels". Langmuir 34 (26): 7624–7639. doi:10.1021/acs.langmuir.8b00811. PMID 29787270. https://doi.org/10.1021/acs.langmuir.8b00811. 
  19. ↑ "Open-channel, water-in-oil emulsification in paper-based microfluidic devices". Lab on a Chip 17 (8): 1436–1441. April 2017. doi:10.1039/c7lc00114b. PMID 28322402. 
  20. ↑ 20.0 20.1 "Suspended microfluidics". Proceedings of the National Academy of Sciences of the United States of America 110 (25): 10111–10116. June 2013. doi:10.1073/pnas.1302566110. PMID 23729815. Bibcode: 2013PNAS..11010111C. 
  21. ↑ "Micromilling: a method for ultra-rapid prototyping of plastic microfluidic devices". Lab on a Chip 15 (11): 2364–2378. June 2015. doi:10.1039/c5lc00234f. PMID 25906246. 
  22. ↑ "Low-cost thermoforming of micro fluidic analysis chips". Journal of Micromechanics and Microengineering 12 (4): 375–379. 2002-06-13. doi:10.1088/0960-1317/12/4/304. ISSN 0960-1317. Bibcode: 2002JMiMi..12..375T. 
  23. ↑ "Hot embossing for fabrication of a microfluidic 3D cell culture platform". Biomedical Microdevices 13 (2): 325–333. April 2011. doi:10.1007/s10544-010-9496-0. PMID 21113663. 
  24. ↑ "Rapid prototyping of arrayed microfluidic systems in polystyrene for cell-based assays". Analytical Chemistry 83 (4): 1408–1417. February 2011. doi:10.1021/ac102897h. PMID 21261280. 
  25. ↑ "Surface-directed capillary system; theory, experiments and applications". Lab on a Chip 5 (8): 827–836. August 2005. doi:10.1039/b502207j. PMID 16027933. 
  26. ↑ "Evaporation from open microchannel grooves". Lab on a Chip 14 (4): 771–778. February 2014. doi:10.1039/c3lc50892g. PMID 24345870. 
  27. ↑ "Development of hydrogel microtubes for microbe culture in open environment". 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). 2015. August 2015. pp. 5896–5899. doi:10.1109/EMBC.2015.7319733. ISBN 978-1-4244-9271-8. 
  28. ↑ 28.0 28.1 "Flow-directed synthesis of spatially variant arrays of branched zinc oxide mesostructures". Nanoscale 9 (24): 8393–8400. June 2017. doi:10.1039/C7NR02655B. PMID 28604901. 
  29. ↑ Electrokinetically Driven Microfluidics and Nanofluidics. Cambridge University Press. 2009. 
  30. ↑ "fluid transistor". http://www.cytonix.com/fluid%20transistor.html. 
  31. ↑ "Columba 2.0: A Co-Layout Synthesis Tool for Continuous-Flow Microfluidic Biochips". IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems 37 (8): 1588–1601. 2018. doi:10.1109/TCAD.2017.2760628. 
  32. ↑ Wu, S.. "MEMS flow sensors for nano-fluidic applications". IEEE. https://ieeexplore.ieee.org/document/838611. 
  33. ↑ "Data associated with 'Combined flow-focus and self-assembly routes for the formation of lipid stabilized oil-shelled microbubbles'". University of Leeds. 2018. doi:10.5518/153. https://archive.researchdata.leeds.ac.uk/327/. 
  34. ↑ 34.0 34.1 34.2 "Probing cellular heterogeneity in cytokine-secreting immune cells using droplet-based microfluidics". Lab on a Chip 13 (24): 4740–4744. December 2013. doi:10.1039/C3LC50945A. PMID 24185478. 
  35. ↑ 35.0 35.1 "Self-synchronizing Pairwise Production of Monodisperse Droplets by Microfluidic Step Emulsification". Applied Physics Letters 93 (25): 254101. 2008. doi:10.1063/1.3050461. Bibcode: 2008ApPhL..93y4101C. http://apl.aip.org/applab/v93/i25/p254101_s1. 
  36. ↑ "Droplet microfluidics". Lab on a Chip 8 (2): 198–220. February 2008. doi:10.1039/B715524G. PMID 18231657. 
  37. ↑ "Microfluidic bubble logic". Science 315 (5813): 832–835. February 2007. doi:10.1126/science.1136907. PMID 17289994. Bibcode: 2007Sci...315..832P. 
  38. ↑ "Particle Manipulation Methods in Droplet Microfluidics". Analytical Chemistry 90 (3): 1434–1443. February 2018. doi:10.1021/acs.analchem.7b01333. PMID 29188994. 
  39. ↑ "Active droplet sorting in microfluidics: a review". Lab on a Chip 17 (5): 751–771. February 2017. doi:10.1039/C6LC01435F. PMID 28197601. 
  40. ↑ "Pillar-induced droplet merging in microfluidic circuits". Lab on a Chip 8 (11): 1837–1841. November 2008. doi:10.1039/b813325e. PMID 18941682. 
  41. ↑ "Breakup of microdroplets in asymmetric T junctions". Physical Review E 87 (5): 053003. May 2013. doi:10.1103/PhysRevE.87.053003. PMID 23767616. Bibcode: 2013PhRvE..87e3003S. 
  42. ↑ Le Pesant et al., Electrodes for a device operating by electrically controlled fluid displacement, U.S. Pat. No. 4,569,575, Feb. 11, 1986.
  43. ↑ NSF Award Search: Advanced Search Results
  44. ↑ "Surface-tension-driven microactuation based on continuous electrowetting". Journal of Microelectromechanical Systems 9 (2): 171–180. June 2000. doi:10.1109/84.846697. ISSN 1057-7157. 
  45. ↑ "Magnetic digital microfluidics – a review". Lab on a Chip 17 (6): 994–1008. March 2017. doi:10.1039/c7lc00025a. PMID 28220916. 
  46. ↑ "Nanoliter-droplet acoustic streaming via ultra high frequency surface acoustic waves". Advanced Materials 26 (29): 4941–4946. August 2014. doi:10.1002/adma.201400091. PMID 24677370. Bibcode: 2014AdM....26.4941S. 
  47. ↑ "Advanced microfluidic droplet manipulation based on piezoelectric actuation". Biomedical Microdevices 12 (5): 907–914. October 2010. doi:10.1007/s10544-010-9445-y. PMID 20559875. 
  48. ↑ (in en) Open Microfluidics. John Wiley & Sons, Inc.. 2016. pp. 229–256. doi:10.1002/9781118720936.ch7. ISBN 9781118720936. 
  49. ↑ "Tailoring porous media for controllable capillary flow". Journal of Colloid and Interface Science 539: 379–387. March 2019. doi:10.1016/j.jcis.2018.12.068. PMID 30594833. Bibcode: 2019JCIS..539..379L. 
  50. ↑ (in en) Complex Fluid-Flows in Microfluidics. Springer. 2017-05-26. ISBN 9783319595931. https://books.google.com/books?id=5YQlDwAAQBAJ&q=Microfabrication+Techniques+for+Microfluidic+Devices+Silverio&pg=PA24. 
  51. ↑ "Integrated Printed Microfluidic Biosensors". Trends in Biotechnology 37 (10): 1104–1120. 2019. doi:10.1016/j.tibtech.2019.03.009. PMID 30992149. 
  52. ↑ "Patterned paper as a platform for inexpensive, low-volume, portable bioassays". Angewandte Chemie 46 (8): 1318–1320. 2007. doi:10.1002/anie.200603817. PMID 17211899. 
  53. ↑ "Smartphone Detection of Escherichia coli From Field Water Samples on Paper Microfluidics". IEEE Sensors Journal 15 (3): 1902. 2015-03-01. doi:10.1109/JSEN.2014.2367039. Bibcode: 2015ISenJ..15.1902P. https://www.researchgate.net/publication/271508549. 
  54. ↑ "Counting and sizing of submicron particles by the resistive pulse technique". Rev. Sci. Instrum. 41 (7): 909–916. 1970. doi:10.1063/1.1684724. Bibcode: 1970RScI...41..909D. 
  55. ↑ Wallace H. Coulter, "Means for counting particles suspended in a fluid", US patent 2656508, published Oct. 20, 1953
  56. ↑ "Characterization of individual polynucleotide molecules using a membrane channel". Proceedings of the National Academy of Sciences of the United States of America 93 (24): 13770–13773. November 1996. doi:10.1073/pnas.93.24.13770. PMID 8943010. Bibcode: 1996PNAS...9313770K. 
  57. ↑ "DNA molecules and configurations in a solid-state nanopore microscope". Nature Materials 2 (9): 611–615. September 2003. doi:10.1038/nmat965. PMID 12942073. Bibcode: 2003NatMa...2..611L. http://nrs.harvard.edu/urn-3:HUL.InstRepos:27877632. 
  58. ↑ "Label-free affinity assays by rapid detection of immune complexes in submicrometer pores". Angewandte Chemie 45 (14): 2281–2285. March 2006. doi:10.1002/anie.200502862. PMID 16506296. 
  59. ↑ "An artificial nanopore for molecular sensing". Nano Lett. 3 (1): 37–38. 2003. doi:10.1021/nl0255202. Bibcode: 2003NanoL...3...37S. 
  60. ↑ "Investigating the translocation of lambda-DNA molecules through PDMS nanopores". Analytical and Bioanalytical Chemistry 394 (2): 437–446. May 2009. doi:10.1007/s00216-008-2529-3. PMID 19050856. 
  61. ↑ "Microfluidic characterization and continuous separation of cells and particles using conducting poly(dimethyl siloxane) electrode induced alternating current-dielectrophoresis". Analytical Chemistry 83 (24): 9579–9585. December 2011. doi:10.1021/ac202137y. PMID 22035423. 
  62. ↑ "A flow focusing microfluidic device with an integrated Coulter particle counter for production, counting and size characterization of monodisperse microbubbles". Lab on a Chip 18 (17): 2653–2664. August 2018. doi:10.1039/C8LC00496J. PMID 30070301. 
  63. ↑ "AC-dielectrophoretic characterization and separation of submicron and micron particles using sidewall AgPDMS electrodes". Biomicrofluidics 6 (1): 12807–128079. March 2012. doi:10.1063/1.3682049. PMID 22662074. 
  64. ↑ "Simultaneous acoustic and photoacoustic microfluidic flow cytometry for label-free analysis". Scientific Reports 9 (1): 1585. February 2019. doi:10.1038/s41598-018-37771-5. PMID 30733497. Bibcode: 2019NatSR...9.1585G. 
  65. ↑ "In Situ Characterization of Protein Corona Formation on Silica Microparticles Using Confocal Laser Scanning Microscopy Combined with Microfluidics". ACS Applied Materials & Interfaces 11 (2): 2459–2469. January 2019. doi:10.1021/acsami.8b14307. PMID 30600987. 
  66. ↑ "Recent advances and current challenges in magnetophoresis based micro magnetofluidics". Biomicrofluidics 12 (3): 031501. May 2018. doi:10.1063/1.5035388. PMID 29983837. 
  67. ↑ 67.0 67.1 "Triplex Inertia-Magneto-Elastic (TIME) sorting of microparticles in non-Newtonian fluids" (in en). Journal of Magnetism and Magnetic Materials 503: 166620. 2020-06-01. doi:10.1016/j.jmmm.2020.166620. ISSN 0304-8853. Bibcode: 2020JMMM..50366620D. 
  68. ↑ "Microfluidics Based Magnetophoresis: A Review". Chemical Record 18 (11): 1596–1612. November 2018. doi:10.1002/tcr.201800018. PMID 29888856. 
  69. ↑ "Engineering magnetic nanoparticles and their integration with microfluidics for cell isolation". Journal of Colloid and Interface Science 564: 204–215. March 2020. doi:10.1016/j.jcis.2019.12.092. PMID 31911225. Bibcode: 2020JCIS..564..204U. 
  70. ↑ "Combined microfluidic-micromagnetic separation of living cells in continuous flow". Biomedical Microdevices 8 (4): 299–308. December 2006. doi:10.1007/s10544-006-0033-0. PMID 17003962. 
  71. ↑ 71.0 71.1 "Magnetism and microfluidics". Lab on a Chip 6 (1): 24–38. January 2006. doi:10.1039/B513005K. PMID 16372066. 
  72. ↑ "The Fabrication and Application Mechanism of Microfluidic Systems for High Throughput Biomedical Screening: A Review". Micromachines 11 (3): 297. March 2020. doi:10.3390/mi11030297. PMID 32168977. 
  73. ↑ "Label-free manipulation via the magneto-Archimedes effect: fundamentals, methodology and applications". Materials Horizons 6 (7): 1359–1379. 2019. doi:10.1039/C8MH01616J. ISSN 2051-6347. http://xlink.rsc.org/?DOI=C8MH01616J. 
  74. ↑ "Label-free cell aggregate formation based on the magneto-Archimedes effect". Applied Physics Letters 98 (16): 163702. 2011-04-18. doi:10.1063/1.3581883. ISSN 0003-6951. Bibcode: 2011ApPhL..98p3702A. 
  75. ↑ Fundamentals and Applications of Microfluidics. Artech House. 2006. 
  76. ↑ "Control and detection of chemical reactions in microfluidic systems". Nature 442 (7101): 394–402. July 2006. doi:10.1038/nature05062. PMID 16871207. Bibcode: 2006Natur.442..394D. 
  77. ↑ "Manufacturing and wetting low-cost microfluidic cell separation devices". Biomicrofluidics 7 (5): 56501. 2013. doi:10.1063/1.4821315. PMID 24404077. 
  78. ↑ "Automating microfluidic part verification". Microfluidics and Nanofluidics 18 (4): 657–665. 2015. doi:10.1007/s10404-014-1464-1. 
  79. ↑ "Dimensional Tailoring of Hydrothermally Grown Zinc Oxide Nanowire Arrays". Nano Letters 16 (1): 753–759. January 2016. doi:10.1021/acs.nanolett.5b04625. PMID 26708095. Bibcode: 2016NanoL..16..753C. 
  80. ↑ Lab-on-a-Chip Technology: Fabrication and Microfluidics. Caister Academic Press. 2009. ISBN 978-1-904455-46-2. 
  81. ↑ 81.0 81.1 Lab-on-a-Chip Technology: Biomolecular Separation and Analysis. Caister Academic Press. 2009. ISBN 978-1-904455-47-9. 
  82. ↑ "Microfluidics-Based Approaches to the Isolation of African Trypanosomes". Pathogens 6 (4): 47. October 2017. doi:10.3390/pathogens6040047. PMID 28981471. 
  83. ↑ "Development of a microfluidic biosensor for detection of environmental mycobacteria". Sensors and Actuators B: Chemical 123 (1): 614–621. 2007. doi:10.1016/j.snb.2006.07.029. 
  84. ↑ 84.0 84.1 "Robust growth of Escherichia coli". Current Biology 20 (12): 1099–1103. June 2010. doi:10.1016/j.cub.2010.04.045. PMID 20537537. 
  85. ↑ "Microcirculation within grooved substrates regulates cell positioning and cell docking inside microfluidic channels". Lab on a Chip 8 (5): 747–754. May 2008. doi:10.1039/B718212K. PMID 18432345. 
  86. ↑ "High-throughput screening of cell responses to biomaterials". European Journal of Pharmaceutical Sciences 35 (3): 151–160. October 2008. doi:10.1016/j.ejps.2008.04.012. PMID 18586092. 
  87. ↑ "Proliferation characteristics of cells cultured under periodic versus static conditions". Cytotechnology 71 (1): 443–452. February 2019. doi:10.1007/s10616-018-0263-z. PMID 30515656. 
  88. ↑ "A gradient-generating microfluidic device for cell biology". Journal of Visualized Experiments 7 (7): 271. 2007. doi:10.3791/271. PMID 18989442. 
  89. ↑ 89.0 89.1 "Physical manipulation of the Escherichia coli chromosome reveals its soft nature". Proceedings of the National Academy of Sciences of the United States of America 109 (40): E2649–E2656. October 2012. doi:10.1073/pnas.1208689109. PMID 22984156. Bibcode: 2012PNAS..109E2649P. 
  90. ↑ "Bending forces plastically deform growing bacterial cell walls". Proceedings of the National Academy of Sciences of the United States of America 111 (16): 5778–5783. April 2014. doi:10.1073/pnas.1317497111. PMID 24711421. Bibcode: 2014PNAS..111.5778A. 
  91. ↑ 91.0 91.1 "3-dimensional electrode patterning within a microfluidic channel using metal ion implantation". Lab on a Chip 10 (6): 783–788. March 2010. doi:10.1039/B917719A. PMID 20221568. https://authors.library.caltech.edu/17871/. 
  92. ↑ "A microsystem-based assay for studying pollen tube guidance in plant reproduction.". J. Micromech. Microeng. 25 (5): 054018. May 2011. doi:10.1088/0960-1317/21/5/054018. Bibcode: 2011JMiMi..21e4018Y. 
  93. ↑ "Two-Dimensional Electrophoresis in a Chip". Lab-on-a-Chip Technology: Biomolecular Separation and Analysis. Caister Academic Press. 2009. ISBN 978-1-904455-47-9. 
  94. ↑ "Elaborating Lab-on-a-Chips for Single-cell Transcriptome Analysis". Lab-on-a-Chip Technology: Biomolecular Separation and Analysis. Caister Academic Press. 2009. ISBN 978-1-904455-47-9. 
  95. ↑ "Microchip-based PCR Amplification Systems". Lab-on-a-Chip Technology: Biomolecular Separation and Analysis. Caister Academic Press. 2009. ISBN 978-1-904455-47-9. 
  96. ↑ "Bacterial metapopulations in nanofabricated landscapes". Proceedings of the National Academy of Sciences of the United States of America 103 (46): 17290–17295. November 2006. doi:10.1073/pnas.0607971103. PMID 17090676. Bibcode: 2006PNAS..10317290K. 
  97. ↑ "Microfluidics-based single cell analysis reveals drug-dependent motility changes in trypanosomes". Lab on a Chip 15 (8): 1961–1968. April 2015. doi:10.1039/C5LC00124B. PMID 25756872. https://edoc.unibas.ch/41485/1/C5LC00124B.pdf. 
  98. ↑ "Microfluidics for bacterial chemotaxis". Integrative Biology 2 (11–12): 604–629. November 2010. doi:10.1039/C0IB00049C. PMID 20967322. 
  99. ↑ "Chemoattraction to dimethylsulfoniopropionate throughout the marine microbial food web". Science 329 (5989): 342–345. July 2010. doi:10.1126/science.1188418. PMID 20647471. Bibcode: 2010Sci...329..342S. 
  100. ↑ "A wall of funnels concentrates swimming bacteria". Journal of Bacteriology 189 (23): 8704–8707. December 2007. doi:10.1128/JB.01033-07. PMID 17890308. 
  101. ↑ "Self-starting micromotors in a bacterial bath". Physical Review Letters 102 (4): 048104. January 2009. doi:10.1103/PhysRevLett.102.048104. PMID 19257480. Bibcode: 2009PhRvL.102d8104A. 
  102. ↑ "Bacterial ratchet motors". Proceedings of the National Academy of Sciences of the United States of America 107 (21): 9541–9545. May 2010. doi:10.1073/pnas.0910426107. PMID 20457936. Bibcode: 2010PNAS..107.9541D. 
  103. ↑ "Swimming bacteria power microscopic gears". Proceedings of the National Academy of Sciences of the United States of America 107 (3): 969–974. January 2010. doi:10.1073/pnas.0913015107. PMID 20080560. Bibcode: 2010PNAS..107..969S. 
  104. ↑ "Liquid micro-lens array activated by selective electrowetting on lithium niobate substrates". Optics Express 16 (11): 8084–8093. May 2008. doi:10.1364/OE.16.008084. PMID 18545521. Bibcode: 2008OExpr..16.8084G. 
  105. ↑ "Manipulating Thin Liquid Films for Tunable Microlens Arrays". Optics and Photonics News 19 (12): 34. 2008. doi:10.1364/OPN.19.12.000034. 
  106. ↑ "Flow-scanning optical tomography". Lab on a Chip 14 (23): 4447–4450. December 2014. doi:10.1039/C4LC00701H. PMID 25256716. 
  107. ↑ "3D microfluidic microscopy using a tilted channel". Biomedical Optics and 3-D Imaging. 2012. pp. BM4B.4. doi:10.1364/BIOMED.2012.BM4B.4. ISBN 978-1-55752-942-8. 
  108. ↑ "Flow-based structured illumination". Applied Physics Letters 102 (16): 161115. 22 April 2013. doi:10.1063/1.4802091. Bibcode: 2013ApPhL.102p1115L. 
  109. ↑ 109.0 109.1 Kirsanov, D.; Babain, V.; Agafonova-Moroz, M.; Lumpov, A.; Legin, A. (2012-03-01). "Combination of optical spectroscopy and chemometric techniques—a possible way for on-line monitoring of spent nuclear fuel (SNF) reprocessing" (in en). Radiochimica Acta 100 (3): 185–188. doi:10.1524/ract.2012.1901. https://www.degruyter.com/document/doi/10.1524/ract.2012.1901/html. 
  110. ↑ 110.0 110.1 Nelson, Gilbert L.; Lackey, Hope E.; Bello, Job M.; Felmy, Heather M.; Bryan, Hannah B.; Lamadie, Fabrice; Bryan, Samuel A.; Lines, Amanda M. (2021-01-26). "Enabling Microscale Processing: Combined Raman and Absorbance Spectroscopy for Microfluidic On-Line Monitoring" (in en). Analytical Chemistry 93 (3): 1643–1651. doi:10.1021/acs.analchem.0c04225. ISSN 0003-2700. PMID 33337856. https://pubs.acs.org/doi/10.1021/acs.analchem.0c04225. 
  111. ↑ 111.0 111.1 111.2 111.3 111.4 Mattio, Elodie; Caleyron, Audrey; Miguirditchian, Manuel; Lines, Amanda M.; Bryan, Samuel A.; Lackey, Hope E.; Rodriguez-Ruiz, Isaac; Lamadie, Fabrice (May 2022). "Microfluidic In-Situ Spectrophotometric Approaches to Tackle Actinides Analysis in Multiple Oxidation States" (in en). Applied Spectroscopy 76 (5): 580–589. doi:10.1177/00037028211063916. ISSN 0003-7028. PMID 35108115. Bibcode: 2022ApSpe..76..580M. http://journals.sagepub.com/doi/10.1177/00037028211063916. 
  112. ↑ 112.0 112.1 Bryan, S. A.; Levitskaia, Tatiana G.; Johnsen, A. M.; Orton, C. R.; Peterson, J. M. (September 2011). "Spectroscopic monitoring of spent nuclear fuel reprocessing streams: an evaluation of spent fuel solutions via Raman, visible, and near-infrared spectroscopy" (in en). Radiochimica Acta 99 (9): 563–572. doi:10.1524/ract.2011.1865. ISSN 0033-8230. https://www.degruyter.com/document/doi/10.1524/ract.2011.1865/html. 
  113. ↑ Nelson, Gilbert L.; Lines, Amanda M.; Bello, Job M.; Bryan, Samuel A. (2019-09-27). "Online Monitoring of Solutions Within Microfluidic Chips: Simultaneous Raman and UV–Vis Absorption Spectroscopies" (in en). ACS Sensors 4 (9): 2288–2295. doi:10.1021/acssensors.9b00736. ISSN 2379-3694. PMID 31434479. https://pubs.acs.org/doi/10.1021/acssensors.9b00736. 
  114. ↑ 114.0 114.1 Rodríguez-Ruiz, Isaac; Lamadie, Fabrice; Charton, Sophie (2018-02-20). "Uranium(VI) On-Chip Microliter Concentration Measurements in a Highly Extended UV–Visible Absorbance Linearity Range" (in en). Analytical Chemistry 90 (4): 2456–2460. doi:10.1021/acs.analchem.7b05162. ISSN 0003-2700. PMID 29327582. https://pubs.acs.org/doi/10.1021/acs.analchem.7b05162. 
  115. ↑ Mattio, Elodie; Lamadie, Fabrice; Rodriguez-Ruiz, Isaac; Cames, Beatrice; Charton, Sophie (2020-02-01). "Photonic Lab-on-a-Chip analytical systems for nuclear applications: optical performance and UV–Vis–IR material characterization after chemical exposure and gamma irradiation" (in en). Journal of Radioanalytical and Nuclear Chemistry 323 (2): 965–973. doi:10.1007/s10967-019-06992-x. ISSN 1588-2780. https://doi.org/10.1007/s10967-019-06992-x. 
  116. ↑ "Lab-chip HPLC with integrated droplet-based microfluidics for separation and high frequency compartmentalisation". Chemical Communications 48 (73): 9144–9146. September 2012. doi:10.1039/c2cc33774f. PMID 22871959. 
  117. ↑ "Detection of Enzyme Inhibitors in Crude Natural Extracts Using Droplet-Based Microfluidics Coupled to HPLC". Analytical Chemistry 89 (9): 4889–4896. May 2017. doi:10.1021/acs.analchem.6b04988. PMID 28374582. 
  118. ↑ "Seamless Combination of High-Pressure Chip-HPLC and Droplet Microfluidics on an Integrated Microfluidic Glass Chip". Analytical Chemistry 89 (23): 13030–13037. December 2017. doi:10.1021/acs.analchem.7b04331. PMID 29096060. 
  119. ↑ "Chip-LC/MS: HPLC-MS using polymer microfluidics.". 7th lnternatonal Conference on Miniaturized Chemical and Blochemlcal Analysts Systems. Squaw Valley, Callfornla USA. October 2003. 481–484. https://www.rsc.org/binaries/LOC/2003/Volume1/120-376.pdf. 
  120. ↑ "Multi-dimensional HPLC/MS of the nucleolar proteome using HPLC-chip/MS". Journal of Separation Science 29 (4): 499–509. March 2006. doi:10.1002/jssc.200500334. PMID 16583688. 
  121. ↑ "Microchip HPLC of peptides and proteins". Analytical Chemistry 77 (9): 2997–3000. May 2005. doi:10.1021/ac048358r. PMID 15859622. 
  122. ↑ "Usefulness of an integrated microfluidic device (HPLC-Chip-MS) to enhance confidence in protein identification by proteomics". Rapid Communications in Mass Spectrometry 20 (21): 3236–3244. 2006. doi:10.1002/rcm.2725. PMID 17016832. Bibcode: 2006RCMS...20.3236H. 
  123. ↑ "Microfluidic gradient formation for nanoflow chip LC". Analytical Chemistry 79 (24): 9302–9309. December 2007. doi:10.1021/ac0712805. PMID 17997523. 
  124. ↑ "Microfluidic chip based nano liquid chromatography coupled to tandem mass spectrometry for the determination of abused drugs and metabolites in human hair". Analytical and Bioanalytical Chemistry 402 (9): 2805–2815. March 2012. doi:10.1007/s00216-012-5711-6. PMID 22281681. 
  125. ↑ "Fully automated isotopic dimethyl labeling and phosphopeptide enrichment using a microfluidic HPLC phosphochip". Analytical and Bioanalytical Chemistry 404 (8): 2507–2512. November 2012. doi:10.1007/s00216-012-6395-7. PMID 22975804. 
  126. ↑ "Water Management in PEM Fuel Cells". Stanford Microfluidics Laboratory. http://microfluidics.stanford.edu/fuel_cells.htm. 
  127. ↑ "Building a Better Fuel Cell Using Microfluidics". APS News 14 (5): 3. May 2005. http://www.aps.org/publications/apsnews/200505/fuel.cfm. 
  128. ↑ "Fuel Cell Initiative at MnIT Microfluidics Laboratory". Michigan Technological University. http://www.me.mtu.edu/mnit/. 
  129. ↑ "NASA Astrobiology Strategy, 2015". https://nai.nasa.gov/media/medialibrary/2015/10/NASA_Astrobiology_Strategy_2015_151008.pdf. 
  130. ↑ "Physics and applications of microfluidics in biology". Annual Review of Biomedical Engineering 4: 261–286. 2002. doi:10.1146/annurev.bioeng.4.112601.125916. PMID 12117759. 
  131. ↑ "Microdroplets in microfluidics: an evolving platform for discoveries in chemistry and biology". Angewandte Chemie 49 (34): 5846–5868. August 2010. doi:10.1002/anie.200906653. PMID 20572214. https://eprints.soton.ac.uk/340192/2/__soton.ac.uk_ude_personalfiles_users_jks1m11_mydesktop_theberge_2010_microdroplets%2520in%2520microfluidics-an%2520evolving%2520platform%2520for%2520discoveries%2520in%2520chemistry%2520and%2520biology.pdf. 
  132. ↑ "Suspension flow in microfluidic devices--a review of experimental techniques focussing on concentration and velocity gradients". Advances in Colloid and Interface Science 173: 23–34. May 2012. doi:10.1016/j.cis.2012.02.003. PMID 22405541. 
  133. ↑ "Toward total automation of microfluidics for extraterrestial [sic] in situ analysis". Analytical Chemistry 83 (22): 8636–8641. November 2011. doi:10.1021/ac202095k. PMID 21972965. 
  134. ↑ "Enhanced amine and amino acid analysis using Pacific Blue and the Mars Organic Analyzer microchip capillary electrophoresis system". Analytical Chemistry 81 (7): 2537–2544. April 2009. doi:10.1021/ac8023334. PMID 19245228. 
  135. ↑ "On the Formation of Dipeptides in Interstellar Model Ices" (in en). The Astrophysical Journal 765 (2): 111. 2013. doi:10.1088/0004-637X/765/2/111. ISSN 0004-637X. Bibcode: 2013ApJ...765..111K. 
  136. ↑ "Analysis of carbonaceous biomarkers with the Mars Organic Analyzer microchip capillary electrophoresis system: carboxylic acids". Astrobiology 11 (6): 519–528. July 2011. doi:10.1089/ast.2011.0634. PMID 21790324. Bibcode: 2011AsBio..11..519S. 
  137. ↑ "Analysis of carbonaceous biomarkers with the Mars Organic Analyzer microchip capillary electrophoresis system: aldehydes and ketones". Electrophoresis 31 (22): 3642–3649. November 2010. doi:10.1002/elps.201000424. PMID 20967779. 
  138. ↑ "Analysis of thiols by microchip capillary electrophoresis for in situ planetary investigations". Microchip Capillary Electrophoresis Protocols. Methods in Molecular Biology. 1274. New York, NY: Humana Press. 2015. pp. 43–52. doi:10.1007/978-1-4939-2353-3_4. ISBN 9781493923526. 
  139. ↑ "The extraction of intracrystalline biomarkers and other organic compounds from sulphate minerals using a microfluidic format – a feasibility study for remote fossil-life detection using a microfluidic H-cell" (in en). International Journal of Astrobiology 6 (1): 27–36. January 2007. doi:10.1017/S147355040600351X. ISSN 1475-3006. Bibcode: 2007IJAsB...6...27B. https://www.cambridge.org/core/journals/international-journal-of-astrobiology/article/the-extraction-of-intracrystalline-biomarkers-and-other-organic-compounds-from-sulphate-minerals-using-a-microfluidic-format-a-feasibility-study-for-remote-fossil-life-detection-using-a-microfluidic-h-cell/C66EB723687CB09F2DAB638A074CBA9D. 
  140. ↑ 140.0 140.1 140.2 Neethirajan, Suresh; Kobayashi, Isao; Nakajima, Mitsutoshi; Wu, Dan; Nandagopal, Saravanan; Lin, Francis (2011). "Microfluidics for food, agriculture and biosystems industries" (in en). Lab on a Chip 11 (9): 1574–1586. doi:10.1039/c0lc00230e. ISSN 1473-0197. PMID 21431239. http://xlink.rsc.org/?DOI=c0lc00230e. 
  141. ↑ Verma, Kiran; Tarafdar, Ayon; Badgujar, Prarabdh C. (January 2021). "Microfluidics assisted tragacanth gum based sub-micron curcumin suspension and its characterization". LWT 135: 110269. doi:10.1016/j.lwt.2020.110269. ISSN 0023-6438. http://dx.doi.org/10.1016/j.lwt.2020.110269. 
  142. ↑ Hsiao, Ching-Ju; Lin, Jui-Fen; Wen, Hsin-Yi; Lin, Yu-Mei; Yang, Chih-Hui; Huang, Keng-Shiang; Shaw, Jei-Fu (2020-02-15). "Enhancement of the stability of chlorophyll using chlorophyll-encapsulated polycaprolactone microparticles based on droplet microfluidics" (in en). Food Chemistry 306: 125300. doi:10.1016/j.foodchem.2019.125300. ISSN 0308-8146. PMID 31562927. https://www.sciencedirect.com/science/article/pii/S0308814619314116. 
  143. ↑ He, Shan; Joseph, Nikita; Feng, Shilun; Jellicoe, Matt; Raston, Colin L. (2020). "Application of microfluidic technology in food processing". Food & Function 11 (7): 5726–5737. doi:10.1039/d0fo01278e. ISSN 2042-6496. PMID 32584365. http://dx.doi.org/10.1039/d0fo01278e. 
  144. ↑ 144.0 144.1 Hinderink, Emma B. A.; Kaade, Wael; Sagis, Leonard; Schroën, Karin; Berton-Carabin, Claire C. (2020-05-01). "Microfluidic investigation of the coalescence susceptibility of pea protein-stabilised emulsions: Effect of protein oxidation level" (in en). Food Hydrocolloids 102: 105610. doi:10.1016/j.foodhyd.2019.105610. ISSN 0268-005X. https://www.sciencedirect.com/science/article/pii/S0268005X19317345. 
  145. ↑ Zhang, Jia; Xu, Wenhua; Xu, Fengying; Lu, Wangwang; Hu, Liuyun; Zhou, Jianlin; Zhang, Chen; Jiang, Zhuo (February 2021). "Microfluidic droplet formation in co-flow devices fabricated by micro 3D printing". Journal of Food Engineering 290: 110212. doi:10.1016/j.jfoodeng.2020.110212. ISSN 0260-8774. http://dx.doi.org/10.1016/j.jfoodeng.2020.110212. 
  146. ↑ 146.0 146.1 Harmon JB, Gray HK, Young CC, Schwab KJ (2020) Microfluidic droplet application for bacterial surveillance in fresh-cut produce wash waters. PLoS ONE 15(6): e0233239. https://doi.org/10.1371/journal.pone.0233239
  147. ↑ 147.0 147.1 Trofimchuk, Evan; Hu, Yaxi; Nilghaz, Azadeh; Hua, Marti Z.; Sun, Selina; Lu, Xiaonan (2020-06-30). "Development of paper-based microfluidic device for the determination of nitrite in meat" (in en). Food Chemistry 316: 126396. doi:10.1016/j.foodchem.2020.126396. ISSN 0308-8146. PMID 32066068. https://www.sciencedirect.com/science/article/pii/S0308814620302557. 
  148. ↑ Ko, Chien-Hsuan; Liu, Chan-Chiung; Chen, Kuan-Hong; Sheu, Fuu; Fu, Lung-Ming; Chen, Szu-Jui (2021-05-30). "Microfluidic colorimetric analysis system for sodium benzoate detection in foods" (in en). Food Chemistry 345: 128773. doi:10.1016/j.foodchem.2020.128773. ISSN 0308-8146. PMID 33302108. https://www.sciencedirect.com/science/article/pii/S0308814620326352. 
  149. ↑ Trofimchuk, Evan; Nilghaz, Azadeh; Sun, Selina; Lu, Xiaonan (2020). "Determination of norfloxacin residues in foods by exploiting the coffee-ring effect and paper-based microfluidics device coupling with smartphone-based detection" (in en). Journal of Food Science 85 (3): 736–743. doi:10.1111/1750-3841.15039. ISSN 1750-3841. PMID 32017096. https://onlinelibrary.wiley.com/doi/abs/10.1111/1750-3841.15039. 
  150. ↑ 150.0 150.1 "Droplet microfluidic platform for fast and continuous-flow RT-qPCR analysis devoted to cancer diagnosis application". Sensors and Actuators B: Chemical 303: 127171. 2020. doi:10.1016/j.snb.2019.127171. 
  151. ↑ "Highly Parallel Genome-wide Expression Profiling of Individual Cells Using Nanoliter Droplets". Cell 161 (5): 1202–1214. May 2015. doi:10.1016/j.cell.2015.05.002. PMID 26000488. 
  152. ↑ "Potential clinical significance of plasma-based KRAS mutation analysis using the COLD-PCR/TaqMan(®) -MGB probe genotyping method". Experimental and Therapeutic Medicine 4 (1): 109–112. July 2012. doi:10.3892/etm.2012.566. PMID 23060932. 
  153. ↑ "Live-cell phenotypic-biomarker microfluidic assay for the risk stratification of cancer patients via machine learning". Nature Biomedical Engineering 2 (10): 761–772. October 2018. doi:10.1038/s41551-018-0285-z. PMID 30854249. 
  154. ↑ "Microfluidic, marker-free isolation of circulating tumor cells from blood samples". Nature Protocols 9 (3): 694–710. March 2014. doi:10.1038/nprot.2014.044. PMID 24577360. 
  155. ↑ "The Metabolism of Tumors in the Body". The Journal of General Physiology 8 (6): 519–530. March 1927. doi:10.1085/jgp.8.6.519. PMID 19872213. 
  156. ↑ "Isolation of rare cells from cell mixtures by dielectrophoresis". Electrophoresis 30 (8): 1388–1398. April 2009. doi:10.1002/elps.200800373. PMID 19306266. 
  157. ↑ "Cancer therapy. Ex vivo culture of circulating breast tumor cells for individualized testing of drug susceptibility". Science 345 (6193): 216–220. July 2014. doi:10.1126/science.1253533. PMID 25013076. Bibcode: 2014Sci...345..216Y. 
  158. ↑ "An integrated double-filtration microfluidic device for isolation, enrichment and quantification of urinary extracellular vesicles for detection of bladder cancer". Scientific Reports 7 (1): 46224. April 2017. doi:10.1038/srep46224. PMID 28436447. Bibcode: 2017NatSR...746224L. 
  159. ↑ "Electrochemical Detection of Tumor-Derived Extracellular Vesicles on Nanointerdigitated Electrodes". Nano Letters 20 (2): 820–828. February 2020. doi:10.1021/acs.nanolett.9b02741. PMID 31536360. Bibcode: 2020NanoL..20..820M. 
  160. ↑ "Microfluidic cytometric analysis of cancer cell transportability and invasiveness". Scientific Reports 5 (1): 14272. September 2015. doi:10.1038/srep14272. PMID 26404901. Bibcode: 2015NatSR...514272L. 
  161. ↑ "A microfluidics platform for combinatorial drug screening on cancer biopsies". Nature Communications 9 (1): 2434. June 2018. doi:10.1038/s41467-018-04919-w. PMID 29934552. Bibcode: 2018NatCo...9.2434E. 
  162. ↑ "Drug sensitivity of single cancer cells is predicted by changes in mass accumulation rate". Nature Biotechnology 34 (11): 1161–1167. November 2016. doi:10.1038/nbt.3697. PMID 27723727. 
  163. ↑ 163.0 163.1 "Multiscale cytometry and regulation of 3D cell cultures on a chip". Nature Communications 8 (1): 469. September 2017. doi:10.1038/s41467-017-00475-x. PMID 28883466. Bibcode: 2017NatCo...8..469S. 
  164. ↑ "High-throughput single-cell ChIP-seq identifies heterogeneity of chromatin states in breast cancer". Nature Genetics 51 (6): 1060–1066. June 2019. doi:10.1038/s41588-019-0424-9. PMID 31152164. 

Further reading

Review papers

Books

Education



Retrieved from "https://handwiki.org/wiki/index.php?title=Physics:Microfluidics&oldid=3282754"