Chemistry:Chitosan

From HandWiki
Chitosan
Structure of completely deacetylated chitosan
Chitosan.jpg
Names
Other names
Poliglusam; Deacetylchitin; Poly-(D)glucosamine; BC; Chitopearl; Chitopharm; Flonac; Kytex
Identifiers
3D model (JSmol)
ChemSpider
UNII
Related compounds
Related compounds
 D-glucosamine and
N-acetylglucosamine (monomers)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☑Y verify (what is ☑Y☒N ?)
Infobox references
Tracking categories (test):

Chitosan /ˈkaɪtəsæn/ is a linear polysaccharide composed of randomly distributed β-(1→4)-linked D-glucosamine (deacetylated unit) and N-acetyl-D-glucosamine (acetylated unit). It is made by treating the chitin shells of shrimp and other crustaceans with an alkaline substance, such as sodium hydroxide.[1][2]

Chitosan has a number of commercial and possible biomedical uses. It can be used in agriculture as a seed treatment and biopesticide, helping plants to fight off fungal infections. In winemaking, it can be used as a fining agent, also helping to prevent spoilage. In industry, it can be used in a self-healing polyurethane paint coating. In medicine, it is useful in bandages to reduce bleeding and as an antibacterial agent; it can also be used to help deliver drugs through the skin.

Manufacture and properties

Forming chitosan by partial deacetylation of chitin.
Commercial chitosan is derived from the shells of shrimp and other sea crustaceans, including Pandalus borealis, pictured here.[3]

Chitosan is produced commercially by deacetylation of chitin, which is the structural element in the exoskeleton of crustaceans (such as crabs and shrimp) and cell walls of fungi.[4][1][2] The degree of deacetylation (%) can be determined by NMR spectroscopy and the degree of deacetylation in commercially available chitosan ranges from 60 to 100%.[5][6] On average, the molecular weight of commercially produced chitosan is 3800–20,000 daltons. A common method for obtaining chitosan is the deacetylation of chitin using sodium hydroxide in excess as a reagent and water as a solvent. The reaction follows first-order kinetics though it occurs in two steps; the activation energy barrier for the first stage is estimated at 48.8 kJ·mol−1 at 25–120 °C and is higher than the barrier to the second stage.[7][8][9]

The amino group in chitosan has a pKb value of ~6.5, which leads to significant protonation in neutral solution, increasing with increased acidity (decreased pH) and the %DA-value. This makes chitosan water-soluble and a bioadhesive which readily binds to negatively charged surfaces[10][11][12] such as mucosal membranes. Also, chitosan can effectively bind to other surface via hydrophobic interaction and/or cation-π interaction (chitosan as a cation source) in aqueous solution.[13] The free amine groups on chitosan chains can make crosslinked polymeric networks with dicarboxylic acids to improve chitosan's mechanical properties.[14] Chitosan enhances the transport of polar drugs across epithelial surfaces, and is biocompatible and biodegradable. However, it is not approved by the FDA for drug delivery. Purified quantities of chitosan are available for biomedical applications.[1][4]

Nanofibrils have been made using chitin and chitosan.[15]

Uses

Agricultural and horticultural use

The agricultural and horticultural uses for chitosan, primarily for plant defense and yield increase, are based on how this glucosamine polymer influences the biochemistry and molecular biology of the plant cell. The cellular targets are the plasma membrane and nuclear chromatin. Subsequent changes occur in cell membranes, chromatin, DNA, calcium, MAP kinase, oxidative burst, reactive oxygen species, callose pathogenesis-related (PR) genes, and phytoalexins.[16]

Chitosan was first registered as an active ingredient (licensed for sale) in 1986.[17]

Natural biocontrol and elicitor

In agriculture, chitosan is typically used as a natural seed treatment and plant growth enhancer, and as an ecologically friendly biopesticide substance that boosts the innate ability of plants to defend themselves against fungal infections.[18] The natural biocontrol active ingredients, chitin/chitosan, are found in the shells of crustaceans, such as lobsters, crabs, and shrimp, and many other organisms, including insects and fungi. It is one of the most abundant biodegradable materials in the world.[citation needed]

Degraded molecules of chitin/chitosan exist in soil and water. Chitosan applications for plants and crops are regulated in the USA by the EPA, and the USDA National Organic Program regulates its use on organic certified farms and crops.[19] EPA-approved, biodegradable chitosan products are allowed for use outdoors and indoors on plants and crops grown commercially and by consumers.[20]

In the European Union and United Kingdom, chitosan is registered as a "basic substance" for use as a biological fungicide and bactericide on a wide range of crops.[21][22]

The natural biocontrol ability of chitosan should not be confused with the effects of fertilizers or pesticides upon plants or the environment. Chitosan active biopesticides represent a new tier of cost-effective biological control of crops for agriculture and horticulture.[23] The biocontrol mode of action of chitosan elicits natural innate defense responses within plant to resist insects, pathogens, and soil-borne diseases when applied to foliage or the soil.[24] Chitosan increases photosynthesis, promotes and enhances plant growth, stimulates nutrient uptake, increases germination and sprouting, and boosts plant vigor. When used as a seed treatment or seed coating on cotton, corn, seed potatoes, soybeans, sugar beets, tomatoes, wheat, and many other seeds, it elicits an innate immunity response in developing roots which destroys parasitic cyst nematodes without harming beneficial nematodes and organisms.[25]

Agricultural applications of chitosan can reduce environmental stress due to drought and soil deficiencies, strengthen seed vitality, improve stand quality, increase yields, and reduce fruit decay of vegetables, fruits and citrus crops .[26] Horticultural application of chitosan increases blooms and extends the life of cut flowers and Christmas trees. The US Forest Service has conducted research on chitosan to control pathogens in pine trees[27][28] and increase resin pitch outflow which resists pine beetle infestation.[29]

NASA life support GAP technology with untreated beans (left tube) and ODC chitosan biocontrol-treated beans (right tube) returned from the Mir space station aboard the space shuttle – September 1997

Chitosan has a rich history of being researched for applications in agriculture and horticulture dating back to the 1980s.[30] By 1989, chitosan salt solutions were applied to crops for improved freeze protection or to crop seed for seed priming.[31] Shortly thereafter, chitosan salt received the first ever biopesticide label from the EPA, then followed by other intellectual property applications.

Chitosan has been used to protect plants in space, as well, exemplified by NASA's experiment to protect adzuki beans grown aboard the space shuttle and Mir space station in 1997 (see photo left).[32] NASA results revealed chitosan induces increased growth (biomass) and pathogen resistance due to elevated levels of β-(1→3)-glucanase enzymes within plant cells. NASA confirmed chitosan elicits the same effect in plants on earth.[33]

In 2008, the EPA approved natural broad-spectrum elicitor status for an ultralow molecular active ingredient of 0.25% chitosan.[34] A natural chitosan elicitor solution for agriculture and horticultural uses was granted an amended label for foliar and irrigation applications by the EPA in 2009.[26] Given its low potential for toxicity and abundance in the natural environment, chitosan does not harm people, pets, wildlife, or the environment when used according to label directions.[35][36][37] Chitosan blends do not work against bark beetles when put on a tree's leaves or in its soil.[38]

Filtration

Chitosan can be used in hydrology as a part of a filtration process.[39] Chitosan causes the fine sediment particles to bind together, and is subsequently removed with the sediment during sand filtration. It also removes heavy minerals, dyes, and oils from the water.[39] As an additive in water filtration, chitosan combined with sand filtration removes up to 99% of turbidity.[40] Chitosan is among the biological adsorbents used for heavy metals removal without negative environmental impacts.[39]

In combination with bentonite, gelatin, silica gel, isinglass, or other fining agents, it is used to clarify wine, mead, and beer. Added late in the brewing process, chitosan improves flocculation, and removes yeast cells, fruit particles, and other detritus that cause hazy wine.[41]

Winemaking and fungal source chitosan

Chitosan has a long history for use as a fining agent in winemaking.[42][43] Fungal source chitosan has shown an increase in settling activity, reduction of oxidized polyphenolics in juice and wine, chelation and removal of copper (post-racking) and control of the spoilage yeast Brettanomyces.[citation needed] These products and uses are approved for European use by the EU and OIV standards.[44][failed verification]

Wound management

Chitosan based wound dressings have been widely explored for a variety of acute and chronic wounds. Chitosan has the ability to adhere to fibrinogen, which produces increased platelet adhesion, causing clotting of blood and hemostasis.[4][45][46] Chitosan hemostatic agents are salts made from mixing chitosan with an organic acid (such as succinic or lactic acid).[47][48] Chitosan may have other properties conducive to wound healing, including antibacterial and antifungal activity, which remain under preliminary research.[4][49]

Chitosan is used within some wound dressings to decrease bleeding.[50] Upon contact with blood, the bandage becomes sticky, effectively sealing the laceration.[51] Chitosan hydrogel-based wound dressings have also been found useful as burn dressings, and for the treatment of chronic diabetic wounds and hydrofluoric acid burns.[4][50]

Chitosan-containing wound dressings received approval for medical use in the United States in 2003.[50]

Temperature-sensitive hydrogels

Chitosan is dissolved in dilute organic acid solutions but is insoluble in high concentrations of hydrogen ions at pH 6.5 and is precipitated as a gel-like compound.[52] Chitosan is positively charged by amine groups, making it suitable for binding to negatively charged molecules. However, it has disadvantages such as low mechanical strength and low-temperature response rate; it must be combined with other gelling agents to improve its properties.[52] Using glycerolphosphate salts (possessing a single anionic head) without chemical modification or cross-linking, the pH-dependent gelation properties can be converted to temperature-sensitive gelation properties. In the year 2000, Chenite was the first to design the temperature-sensitive chitosan hydrogels drug delivery system using chitosan and β-glycerol phosphate. This new system can remain in the liquid state at room temperature, while becoming gel with increasing temperature above the physiological temperature (37 °C). Phosphate salts cause a particular behaviour in chitosan solutions, thereby allowing these solutions to remain soluble in the physiological pH range (pH   7), and they will be gel only at body temperature. When the liquid solution of chitosan-glycerol phosphate, containing the drug, enters the body through a syringe injection, it becomes a water-insoluble gel at 37 °C. The entrapped drug particles between the hydrogel chains will be gradually released.[52]

Research

Chitosan and derivatives have been explored in the development of nanomaterials, bioadhesives, wound dressing materials,[53][14][46][4] improved drug delivery systems,[54][4] enteric coatings,[55] and in medical devices.[56][57][1][58]

Bioprinting

Large three-dimensional functional objects made from chitosan.[59]

Bioinspired materials, a manufacturing concept inspired by natural nacre, shrimp carapace, or insect cuticles,[60][61][62] has led to development of bioprinting methods to manufacture large scale consumer objects using chitosan.[63][64] This method is based on replicating the molecular arrangement of chitosan from natural materials into fabrication methods, such as injection molding or mold casting.[65] Once discarded, chitosan-constructed objects are biodegradable and non-toxic.[66] The method is used to engineer and bioprint human organs or tissues.[67][68]

Pigmented chitosan objects can be recycled,[69] with the option of reintroducing or discarding the dye at each recycling step, enabling reuse of the polymer independently of colorants.[70][71] Unlike other plant-based bioplastics (e.g. cellulose, starch), the main natural sources of chitosan come from marine environments and do not compete for land or other human resources.[59][72]

3D Bioprinting of tissue engineering scaffolds for creating artificial tissues and organs is another application where chitosan has gained popularity. Chitosan has high biocompatibility, biodegradability, and antimicrobial, hemostatic, wound healing and immunomodulatory activities which make it suitable for making artificial tissues.[1][73][74]

Weight loss

Chitosan is marketed in a tablet form as a "fat binder".[75] Although the effect of chitosan on lowering cholesterol and body weight has been evaluated, the effect appears to have no or low clinical importance.[76][77] Reviews from 2016 and 2008 found there was no significant effect, and no justification for overweight people to use chitosan supplements.[76][78] In 2015, the U.S. Food and Drug Administration issued a public advisory about supplement retailers who made exaggerated claims concerning the supposed weight loss benefit of various products.[79]

Biodegradable antimicrobial food packaging

Microbial contamination of food products accelerates the deterioration process and increases the risk of foodborne illness caused by potentially life-threatening pathogens.[80] Ordinarily, food contamination originates superficially, requiring surface treatment and packaging as crucial factors to assure food quality and safety.[80] Biodegradable chitosan films have potential for preserving various food products, retaining their firmness and restricting weight loss due to dehydration. In addition, composite biodegradable films containing chitosan and antimicrobial agents are in development as safe alternatives to preserve food products.[80]

Battery electrolyte

Chitosan is being investigated as an electrolyte for rechargeable batteries with good performance and low environmental impact due to rapid biodegradability, leaving recycleable zinc. The electrolyte has excellent physical stability up to 50 °C, electrochemical stability up to 2 V with zinc electrodes, and accommodates redox reactions involved in the Zn-MnO2 alkaline system. (As of 2022) results were promising, but the battery needed testing on a larger scale and under actual use conditions.[81][82][83]

References

  1. ↑ 1.0 1.1 1.2 1.3 1.4 Sanjanwala, Dhruv; Londhe, Vaishali; Trivedi, Rashmi; Bonde, Smita; Sawarkar, Sujata; Kale, Vinita; Patravale, Vandana (2024-01-01). "Polysaccharide-based hydrogels for medical devices, implants and tissue engineering: A review". International Journal of Biological Macromolecules 256: 128488. doi:10.1016/j.ijbiomac.2023.128488. ISSN 0141-8130. https://www.sciencedirect.com/science/article/pii/S0141813023053874. 
  2. ↑ 2.0 2.1 Kou, Shijie (Gabriel); Peters, Linda M.; Mucalo, Michael R. (2021-02-01). "Chitosan: A review of sources and preparation methods". International Journal of Biological Macromolecules 169: 85–94. doi:10.1016/j.ijbiomac.2020.12.005. ISSN 0141-8130. PMID 33279563. https://www.sciencedirect.com/science/article/pii/S0141813020351631. 
  3. ↑ Shahidi, Fereidoon; Synowiecki, Jozef (1991). "Isolation and characterization of nutrients and value-added products from snow crab (Chionoecetes opilio) and shrimp (Pandalus borealis) processing discards". Journal of Agricultural and Food Chemistry 39 (8): 1527–32. doi:10.1021/jf00008a032. 
  4. ↑ 4.0 4.1 4.2 4.3 4.4 4.5 4.6 Sanjanwala, Dhruv; Londhe, Vaishali; Trivedi, Rashmi; Bonde, Smita; Sawarkar, Sujata; Kale, Vinita; Patravale, Vandana (2022-11-28). "Polysaccharide-based hydrogels for drug delivery and wound management: A review" (in en). Expert Opinion on Drug Delivery 19 (12): 1664–1695. doi:10.1080/17425247.2022.2152791. ISSN 1742-5247. PMID 36440488. https://www.tandfonline.com/doi/full/10.1080/17425247.2022.2152791. 
  5. ↑ de Alvarenga, Elson Santiago; Pereira de Oliveira, Cristiane; Roberto Bellato, Carlos (2010-05-16). "An approach to understanding the deacetylation degree of chitosan". Carbohydrate Polymers 80 (4): 1155–1160. doi:10.1016/j.carbpol.2010.01.037. ISSN 0144-8617. https://www.sciencedirect.com/science/article/pii/S0144861710000639. 
  6. ↑ Mima, Seiichi; Miya, Masaru; Iwamoto, Reikichi; Yoshikawa, Susumu (June 1983). "Highly deacetylated chitosan and its properties" (in en). Journal of Applied Polymer Science 28 (6): 1909–1917. doi:10.1002/app.1983.070280607. ISSN 0021-8995. https://onlinelibrary.wiley.com/doi/10.1002/app.1983.070280607. 
  7. ↑ Novikov, Vitaly Yu.; Derkach, Svetlana R.; Konovalova, Irina N.; Dolgopyatova, Natalya V.; Kuchina, Yulya A. (2023-03-30). "Mechanism of Heterogeneous Alkaline Deacetylation of Chitin: A Review". Polymers 15 (7): 1729. doi:10.3390/polym15071729. ISSN 2073-4360. PMID 37050343. 
  8. ↑ Narudin, Nur Alimatul Hakimah; Rosman, Nurul ‘Aqilah; Shahrin, Ensan Waatriah ES; Sofyan, Nofrijon; Hanif Mahadi, Abdul; Kusrini, Eny; Hobley, Jonathan; Usman, Anwar (January 2022). "Extraction, characterization, and kinetics of N-deacetylation of chitin obtained from mud crab shells" (in en). Polymers and Polymer Composites 30: 096739112211096. doi:10.1177/09673911221109611. ISSN 0967-3911. http://journals.sagepub.com/doi/10.1177/09673911221109611. 
  9. ↑ Mohammed, Musarrat H.; Williams, Peter A.; Tverezovskaya, Olga (2013-06-01). "Extraction of chitin from prawn shells and conversion to low molecular mass chitosan". Food Hydrocolloids 31 (2): 166–171. doi:10.1016/j.foodhyd.2012.10.021. ISSN 0268-005X. https://www.sciencedirect.com/science/article/pii/S0268005X12002470. 
  10. ↑ Dong Woog Lee (2013). "Strong adhesion and cohesion of chitosan in aqueous solutions". Langmuir 29 (46): 14222–14229. doi:10.1021/la403124u. PMID 24138057. 
  11. ↑ Chanoong Lim et al. (2015). "Contact time- and pH-dependent adhesion and cohesion of low molecular weight chitosan coated surfaces". Carbohydrate Polymers 117 (6): 887–894. doi:10.1016/j.carbpol.2014.10.033. PMID 25498713. 
  12. ↑ Lim, Chanoong; Hwang, Dong Soo; Lee, Dong Woog (2021-05-01). "Intermolecular interactions of chitosan: Degree of acetylation and molecular weight" (in en). Carbohydrate Polymers 259: 117782. doi:10.1016/j.carbpol.2021.117782. ISSN 0144-8617. PMID 33674019. https://www.sciencedirect.com/science/article/abs/pii/S0144861721001697. 
  13. ↑ Choi, Jieun; Hwang, Dong Soo; Lim, Chanoong; Lee, Dong Woog (2024-01-15). "Interaction mechanism between low molecular weight chitosan nanofilm and functionalized surfaces in aqueous solutions". Carbohydrate Polymers 324: 121504. doi:10.1016/j.carbpol.2023.121504. ISSN 0144-8617. PMID 37985092. https://www.sciencedirect.com/science/article/pii/S0144861723009694. 
  14. ↑ 14.0 14.1 Moghadas, Babak; Solouk, Atefeh; Sadeghi, Davoud (2020-08-24). "Development of chitosan membrane using non-toxic crosslinkers for potential wound dressing applications" (in en). Polymer Bulletin 78 (9): 4919–4929. doi:10.1007/s00289-020-03352-8. ISSN 1436-2449. 
  15. ↑ Jeffryes, C; Agathos, SN; Rorrer, G (June 2015). "Biogenic nanomaterials from photosynthetic microorganisms.". Current Opinion in Biotechnology 33: 23–31. doi:10.1016/j.copbio.2014.10.005. PMID 25445544. 
  16. ↑ Hadwiger, Lee A. (2013). "Multiple effects of chitosan on plant systems: Solid science or hype". Plant Science 208: 42–9. doi:10.1016/j.plantsci.2013.03.007. PMID 23683928. 
  17. ↑ "Chitosan; Poly-D-glucosamine (128930) Fact Sheet". Environmental Protection Agency (EPA). February 2001. https://www3.epa.gov/pesticides/chem_search/reg_actions/registration/fs_PC-128930_01-Jun-03.pdf. 
  18. ↑ Linden, James C.; Stoner, Richard J.; Knutson, Kenneth W.; Gardner-Hughes, Cecilie A. (2000). "Organic disease control elicitors". Agro Food Industry Hi-Tech 11 (5): 32–4. 
  19. ↑ "USDA NOP and EPA Rule on Chitosan, Federal Register/Vol. 72, No. 236/Monday, December 10, 2007/Rules and Regulation". http://edocket.access.gpo.gov/2007/pdf/E7-23831.pdf. 
  20. ↑ "Chitin and Chitosan Final Registration Review Decision, Document ID: EPA-HQ-OPP-2007-0566-0019". Regulations.gov. 11 December 2008. pp. 10–15. http://www.regulations.gov/#!documentDetail;D=EPA-HQ-OPP-2007-0566-0019. 
  21. ↑ European Commission (18 November 2021). "Expert group for technical advice on organic production. Final report on plant protection (III)". https://ec.europa.eu/info/sites/default/files/food-farming-fisheries/farming/documents/final_report_egtop_plant_protection_iii_0.pdf. 
  22. ↑ "Basic substances | AHDB". https://ahdb.org.uk/knowledge-library/basic-substances. 
  23. ↑ Goosen, Mattheus F. A. (1 June 1996). Applications of Chitan and Chitosan. CRC Press. pp. 132–9. ISBN 978-1-56676-449-0. https://books.google.com/books?id=3YmDQyVfsDkC&pg=PA132. 
  24. ↑ Linden, J.C.; Stoner, R.J. (2005). "Proprietary Elicitor Affects Seed Germination and Delays Fruit Senescence". Journal of Food, Agriculture & Environment. http://www.yeacrops.com/Elicitor%20-%20Ethylene%20Reduction.pdf. 
  25. ↑ "Smiley R., Cook R.J., Pauliz T., Seed Treatment for Sample Cereal Grains Oregon State University, 2002, EM 8797". http://extension.oregonstate.edu/catalog/pdf/em/em8797.pdf#search=%22YEA!%20Seed%20treatment%22. 
  26. ↑ 26.0 26.1 Linden, J. C.; Stoner, R. J. (2007). "Pre-harvest application of proprietary elicitor delays fruit senescence". Advances in Plant Ethylene Research. pp. 301–2. doi:10.1007/978-1-4020-6014-4_65. ISBN 978-1-4020-6013-7. 
  27. ↑ Mason, Mary E.; Davis, John M. (1997). "Defense Response in Slash Pine: Chitosan Treatment Alters the Abundance of Specific mRNAs". Molecular Plant-Microbe Interactions 10 (1): 135–7. doi:10.1094/MPMI.1997.10.1.135. PMID 9002276. 
  28. ↑ Klepzig, Kier D.; Walkinshaw, Charles H. (2003). "Cellular response of loblolly pine to wound inoculation with bark beetle-associated fungi and chitosan". Res. Pap. SRS-30.asheville, Nc: U.S. Department of Agriculture, Forest Service, Southern Research Station. 9P 030. http://www.treesearch.fs.fed.us/pubs/5322. 
  29. ↑ O'Toole, Erin (10 September 2009). "Solution for Pine Bark Beetles May Help Front Range Trees". NPR Morning Edition – KUNC 91.5 FM Greeley, CO. http://www.publicbroadcasting.net/kunc/news.newsmain/article/1/0/1552856/Regional/Solution.for.Pine.Bark.Beetles.May.Help.Front.Range.Trees. 
  30. ↑ Croteau, R.; Gurkewitz, S.; Johnson, M. A.; Fisk, H. J. (1987). "Biochemistry of Oleoresinosis: Monoterpene and Diterpene Biosynthesis in Lodgepole Pine Saplings Infected with Ceratocystis clavigera or Treated with Carbohydrate Elicitors". Plant Physiology 85 (4): 1123–8. doi:10.1104/pp.85.4.1123. PMID 16665815. 
  31. ↑ "Treatment of Plants with Chitosan Salts, 1989, Patent WO/1989/007395". http://www.wipo.int/pctdb/en/wo.jsp?wo=1989007395. 
  32. ↑ Stoner, R. (2006). "Progressive Plant Growing Has Business Blooming, Environmental and Agricultural Resources". NASA. pp. 68–71. http://www.nasa.gov/vision/earth/technologies/aeroponic_plants.html. .
  33. ↑ Linden, James C.; Stoner, Richard J. (21 October 2008). "YEA! Elicitor Response Comparison to Chitin / Chitosan in Mung Bean and Adzuki Bean Germination Experiments". http://www.agrihouse.com/references/compare.pdf. 
  34. ↑ "Chitin/Chitosan, Farnesol/Nerolidol and Nosema locustae Final Registration Review Decision". Federal Register Notice of Availability 73 (248). 24 December 2008. http://www.epa.gov/EPA-PEST/2008/December/Day-24/p30496.htm. 
  35. ↑ "Chitosan Exemption from the Requirement of a Tolerance". US Environmental Protection Agency. http://www.epa.gov/fedrgstr/EPA-PEST/1995/April/Day-19/pr-224.html. 
  36. ↑ "Control Strategies to reduce postharvest decay of fresh fruits and vegetables". USDA.gov. http://pubsearch.arsnet.usda.gov/search?q=chitosan&requiredfields=spsite_id%3A12750000%7Cspsite_id%3A12-50-00-00&btnG=Go%21&filter=0&as_sitesearch=ars.usda.gov&ie=&output=xml_no_dtd&client=ars_frontend&proxystylesheet=ars_frontend&lr=&oe=. 
  37. ↑ "Chitosan; Poly-D-glucosamine (128930) Fact Sheet". US Environmental Protection Agency. 2 May 2006. http://www.epa.gov/pesticides/biopesticides/ingredients/factsheets/factsheet_128930.htm. 
  38. ↑ Klepzig, Kier D; Strom, Brian L (2010-08-20). "Effects of a commercial chitosan formulation on bark beetle (Coleoptera: Curculionidae) resistance parameters in loblolly pine". Journal of Entomological Science 46 (2): 124–134. 2011-04-01. doi:10.18474/0749-8004-46.2.124. https://www.srs.fs.fed.us/pubs/ja/2011/ja_2011_klepzig_002.pdf. Retrieved 2021-03-06. ". . . application of a commercially-prepared chitosan formulation to loblolly pine produced inconsistent responses in tree parameters associated with bark beetle resistance, suggesting that exogenously applied chitosan preparations have limited utility for managing bark beetles.". 
  39. ↑ 39.0 39.1 39.2 Yong, S. K; Shrivastava, M; Srivastava, P; Kunhikrishnan, A; Bolan, N (2015). "Environmental Applications of Chitosan and Its Derivatives". Reviews of Environmental Contamination and Toxicology Volume 233. 233. pp. 1–43. doi:10.1007/978-3-319-10479-9_1. ISBN 978-3-319-10478-2. 
  40. ↑ Alan Woodmansey (19 March 2002). "Chitosan Treatment of Sediment Laden Water – Washington State I-90 Issaquah Project". Federal Highway Administration. U.S. Department of Transportation. http://www.fhwa.dot.gov/engineering/geotech/policymemo/tanks.cfm. 
  41. ↑ Rayner, Terry. "Fining and Clarifying Agents". http://www.makewine.com/makewine/fining.html. 
  42. ↑ Chorniak J (October 2007). "A clearer understanding of fining agents". Wine Maker Magazine. https://winemakermag.com/26-a-clearer-understanding-of-fining-agents. 
  43. ↑ Quintela, S; Villarán, M. C.; López De Armentia, I; Elejalde, E (2012). "Ochratoxin a removal from red wine by several oenological fining agents: Bentonite, egg albumin, allergen-free adsorbents, chitin and chitosan". Food Additives & Contaminants: Part A 29 (7): 1168–74. doi:10.1080/19440049.2012.682166. PMID 22545592. 
  44. ↑ Escudero-Abarca, Blanca I.; Escudero-Abarca, M. Guadalupe; Aguilar-Uscanga, Patricia M.; Hayward-Jones, Patricia; Mendoza, Mario; Ramírez, Leticia (2004). "Selective antimicrobial action of chitosan against spoilage yeasts in mixed culture fermentations". Journal of Industrial Microbiology and Biotechnology 31 (1): 16–22. doi:10.1007/s10295-004-0112-2. PMID 14747932. 
  45. ↑ Ullah, Faheem; Othman, Muhammad Bisyrul Hafi; Javed, Fatima; Ahmad, Zulkifli; Akil, Hazizan Md. (2015-12-01). "Classification, processing and application of hydrogels: A review" (in en). Materials Science and Engineering: C 57: 414–433. doi:10.1016/j.msec.2015.07.053. ISSN 0928-4931. PMID 26354282. https://www.sciencedirect.com/science/article/pii/S0928493115302393. 
  46. ↑ 46.0 46.1 Feng, Peipei; Luo, Yang; Ke, Chunhai; Qiu, Haofeng; Wang, Wei; Zhu, Yabin; Hou, Ruixia; Xu, Long et al. (2021). "Chitosan-Based Functional Materials for Skin Wound Repair: Mechanisms and Applications". Frontiers in Bioengineering and Biotechnology 9: 650598. doi:10.3389/fbioe.2021.650598. ISSN 2296-4185. PMID 33681176. 
  47. ↑ Baldrick, Paul (2010). "The safety of chitosan as a pharmaceutical excipient". Regulatory Toxicology and Pharmacology 56 (3): 290–9. doi:10.1016/j.yrtph.2009.09.015. PMID 19788905. 
  48. ↑ Guo, Baolin; Dong, Ruonan; Liang, Yongping; Li, Meng (2021-11-01). "Haemostatic materials for wound healing applications" (in en). Nature Reviews Chemistry 5 (11): 773–791. doi:10.1038/s41570-021-00323-z. ISSN 2397-3358. PMID 37117664. https://www.nature.com/articles/s41570-021-00323-z. 
  49. ↑ Ducheyne, Paul; Healy, Kevin; Hutmacher, Dietmar E. et al., eds (2011). Comprehensive Biomaterials. Amsterdam: Elsevier. p. 229. ISBN 9780080552941. https://books.google.com/books?id=oa8YpRsD1kkC&pg=RA1-PA229. 
  50. ↑ 50.0 50.1 50.2 Zhang, Yin-Juan; Gao, Bo; Liu, Xi-Wen (2015). "Topical and effective hemostatic medicines in the battlefield". Int J Clin Exp Med 8 (1): 10–19. PMID 25784969. 
  51. ↑ "Chitin and chitosan: biopolymers for wound management". International Wound Journal 14 (6): 1276–1289. December 2017. doi:10.1111/iwj.12797. PMID 28799228. 
  52. ↑ 52.0 52.1 52.2 Rahmanian-Devin, Pouria; Baradaran Rahimi, Vafa; Askari, Vahid Reza (2021). "Thermosensitive Chitosan-β-Glycerophosphate Hydrogels as Targeted Drug Delivery Systems: An Overview on Preparation and Their Applications". Advances in Pharmacological and Pharmaceutical Sciences 2021: 17. doi:10.1155/2021/6640893. PMID 34036263. 
  53. ↑ Moghadas, Babak; Dashtimoghadam, Erfan; Mirzadeh, Hamid; Seidi, Farzad; Hasani-Sadrabadi, Mohammad Mahdi (2016-01-19). "Novel chitosan-based nanobiohybrid membranes for wound dressing applications" (in en). RSC Advances 6 (10): 7701–7711. doi:10.1039/C5RA23875G. ISSN 2046-2069. Bibcode: 2016RSCAd...6.7701M. https://pubs.rsc.org/en/content/articlelanding/2016/ra/c5ra23875g. 
  54. ↑ Agnihotri, Sunil A.; Mallikarjuna, Nadagouda N.; Aminabhavi, Tejraj M. (2004). "Recent advances on chitosan-based micro- and nanoparticles in drug delivery". Journal of Controlled Release 100 (1): 5–28. doi:10.1016/j.jconrel.2004.08.010. PMID 15491807. 
  55. ↑ Aiedeh, K.M.; Taha, M.O.; Al-Khatib, H. (2005). "Evaluation of chitosan succinate and chitosan phthalate as enteric coating polymers for diclofenac sodium tablets" (in en). Journal of Drug Delivery Science and Technology 15 (3): 207–211. doi:10.1016/S1773-2247(05)50033-9. 
  56. ↑ Shukla, S. K; Mishra, A. K; Arotiba, O. A; Mamba, B. B (2013). "Chitosan-based nanomaterials: A state-of-the-art review". International Journal of Biological Macromolecules 59: 46–58. doi:10.1016/j.ijbiomac.2013.04.043. PMID 23608103. 
  57. ↑ Ryu, J. H; Hong, S; Lee, H (2015). "Bio-inspired adhesive catechol-conjugated chitosan for biomedical applications: A mini review". Acta Biomaterialia 27: 101–15. doi:10.1016/j.actbio.2015.08.043. PMID 26318801. 
  58. ↑ Federer, C; Kurpiers, M; Bernkop-Schnürch, A (2021). "Thiolated Chitosans: A Multi-talented Class of Polymers for Various Applications". Biomacromolecules 22 (1): 24–56. doi:10.1021/acs.biomac.0c00663. PMID 32567846. 
  59. ↑ 59.0 59.1 "Manufacturing of large-scale functional objects using biodegradable chitosan bioplastic". Macromolecular Materials and Engineering 299 (8): 932–938. February 2014. doi:10.1002/mame.201300426. 
  60. ↑ Tampieri, A; Celotti, G; Landi, E; Sandri, M; Roveri, N; Falini, G (2003). "Biologically inspired synthesis of bone-like composite: Self-assembled collagen fibers/hydroxyapatite nanocrystals". Journal of Biomedical Materials Research 67 (2): 618–25. doi:10.1002/jbm.a.10039. PMID 14566805. 
  61. ↑ Tampieri, A; Celotti, G; Landi, E (2005). "From biomimetic apatites to biologically inspired composites". Analytical and Bioanalytical Chemistry 381 (3): 568–76. doi:10.1007/s00216-004-2943-0. PMID 15696277. 
  62. ↑ Cheng, Q; Jiang, L; Tang, Z (2014). "Bioinspired layered materials with superior mechanical performance". Accounts of Chemical Research 47 (4): 1256–66. doi:10.1021/ar400279t. PMID 24635413. 
  63. ↑ Tajik, H; Moradi, M; Rohani, S. M.; Erfani, A. M.; Jalali, F. S. (2008). "Preparation of chitosan from brine shrimp (Artemia urmiana) cyst shells and effects of different chemical processing sequences on the physicochemical and functional properties of the product". Molecules 13 (6): 1263–74. doi:10.3390/molecules13061263. PMID 18596653. 
  64. ↑ Fernandez, J. G.; Ingber, D. E. (2012). "Unexpected strength and toughness in chitosan-fibroin laminates inspired by insect cuticle". Advanced Materials 24 (4): 480–4. doi:10.1002/adma.201104051. PMID 22162193. Bibcode: 2012AdM....24..480F. 
  65. ↑ Wyss Institute Communications (May 2014). "Promising solution to plastic pollution". Harvard Gazette, Harvard University, Boston, MA. http://news.harvard.edu/gazette/story/2014/05/promising-solution-to-plastic-pollution/. 
  66. ↑ Shukla, S. K.; Mishra, A. K.; Arotiba, O. A.; Mamba, B. B. (2013). "Chitosan-based nanomaterials: A state-of-the-art review". International Journal of Biological Macromolecules 59: 46–58. doi:10.1016/j.ijbiomac.2013.04.043. PMID 23608103. 
  67. ↑ Lee, J. Y.; Choi, B.; Wu, B.; Lee, M. (2013). "Customized biomimetic scaffolds created by indirect three-dimensional printing for tissue engineering". Biofabrication 5 (4): 045003. doi:10.1088/1758-5082/5/4/045003. PMID 24060622. Bibcode: 2013BioFa...5d5003L. 
  68. ↑ Selko A (6 March 2014). "Manufacturing 3-D objects just got easier with new bioplastic". Industry Week. http://www.industryweek.com/around-web/manufacturing-3-d-objects-just-got-easier-new-bioplastic. 
  69. ↑ Fernandez, J. G.; Ingber, D. E. (2014). "Manufacturing of Large-Scale Functional Objects Using Biodegradable Chitosan Bioplastic". Macromolecular Materials and Engineering 299 (8): 932–938. doi:10.1002/mame.201300426. 
  70. ↑ "Manufacturing a solution to planet-clogging plastics". Hansjorg Wyss Institute for Biologically Inspired Engineering, Harvard University. 3 March 2014. http://wyss.harvard.edu/viewpressrelease/144/manufacturing-a-solution-to-planetclogging-plastics-. 
  71. ↑ Zhao, Y; Xie, Z; Gu, H; Zhu, C; Gu, Z (2012). "Bio-inspired variable structural color materials". Chemical Society Reviews 41 (8): 3297–317. doi:10.1039/c2cs15267c. PMID 22302077. 
  72. ↑ "Chitosan bioplastic". Wyss Institute Communications, Hansjorg Wyss Institute for Biologically Inspired Engineering, Harvard University. 2014. http://wyss.harvard.edu/viewpage/531. 
  73. ↑ Croisier, Florence; Jérôme, Christine (2013-04-01). "Chitosan-based biomaterials for tissue engineering". European Polymer Journal. Biobased Polymers and Related Materials 49 (4): 780–792. doi:10.1016/j.eurpolymj.2012.12.009. ISSN 0014-3057. https://www.sciencedirect.com/science/article/pii/S0014305712004181. 
  74. ↑ Kim, In-Yong; Seo, Seog-Jin; Moon, Hyun-Seuk; Yoo, Mi-Kyong; Park, In-Young; Kim, Bom-Chol; Cho, Chong-Su (2008-01-01). "Chitosan and its derivatives for tissue engineering applications". Biotechnology Advances 26 (1): 1–21. doi:10.1016/j.biotechadv.2007.07.009. ISSN 0734-9750. PMID 17884325. https://www.sciencedirect.com/science/article/pii/S0734975007000948. 
  75. ↑ Allison Sarubin-Fragakis, Cynthia Thomson (2007). The Health Professional's Guide to Popular Dietary Supplements. Academy of Nutrition and Dietetics. p. 96. ISBN 9780880913638. https://books.google.com/books?id=KA8vU6XKfIAC&pg=PA96. 
  76. ↑ 76.0 76.1 Ríos-Hoyo, A; Gutiérrez-Salmeán, G (June 2016). "New Dietary Supplements for Obesity: What We Currently Know.". Current Obesity Reports 5 (2): 262–70. doi:10.1007/s13679-016-0214-y. PMID 27053066. 
  77. ↑ "Chitosan". Drugs.com. 12 February 2018. https://www.drugs.com/npp/chitosan.html. 
  78. ↑ Jull, Andrew B; Ni Mhurchu, Cliona; Bennett, Derrick A; Dunshea-Mooij, Christel AE; Rodgers, Anthony (2008). Jull, Andrew B. ed. "Chitosan for overweight or obesity". Cochrane Database of Systematic Reviews (3): CD003892. doi:10.1002/14651858.CD003892.pub3. PMID 18646097. 
  79. ↑ "Beware of Products Promising Miracle Weight Loss". US Food and Drug Administration. 5 January 2015. https://www.fda.gov/ForConsumers/ConsumerUpdates/ucm246742.htm. 
  80. ↑ 80.0 80.1 80.2 Al-Tayyar, Nasser A.; Youssef, Ahmed M.; Al-hindi, Rashad (2020). "Antimicrobial food packaging based on sustainable Bio-based materials for reducing foodborne pathogens: A review". Food Chemistry 310: 125915. doi:10.1016/j.foodchem.2019.125915. ISSN 0308-8146. PMID 31841936. 
  81. ↑ Poosapati, Aswani; Vadnala, Sudharshan; Negrete, Karla; Lan, Yucheng; Hutchison, John; Zupan, Mark; Madan, Deepa (15 April 2021). "Rechargeable Zinc-Electrolytic Manganese Dioxide (EMD) Battery with a Flexible Chitosan-Alkaline Electrolyte". ACS Applied Energy Materials (American Chemical Society (ACS)) 4 (4): 4248–4258. doi:10.1021/acsaem.1c00675. ISSN 2574-0962. 
  82. ↑ Poosapati, Aswani; Negrete, Karla; Thorpe, Micah; Hutchison, John; Zupan, Mark; Lan, Yucheng; Madan, Deepa (6 April 2021). "Safe and flexible chitosan‐based polymer gel as an electrolyte for use in zinc‐alkaline based chemistries". Journal of Applied Polymer Science (Wiley) 138 (33): 50813. doi:10.1002/app.50813. ISSN 0021-8995. 
  83. ↑ Quaglia, Sofia (1 September 2022). "Crab and lobster shells could be used to make renewable batteries". the Guardian. https://www.theguardian.com/science/2022/sep/01/crab-lobster-shells-could-used-make-renewable-batteries. 

External links

  • International research project Nano3Bio, focused on tailor-made biotechnological production of chitosans (funded by the European Union)



Retrieved from "https://handwiki.org/wiki/index.php?title=Chemistry:Chitosan&oldid=3326728"