Biology:Fluorescence

From HandWiki
Revision as of 16:27, 11 February 2024 by Raymond Straus (talk | contribs) (link)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Emission of light by a substance that has absorbed light
Fluorescent minerals emit visible light when exposed to ultraviolet.
Fluorescent marine organisms
Fluorescent clothes used in black light theater production, Prague

Fluorescence is the emission of light by a substance that has absorbed light or other electromagnetic radiation. It is a form of luminescence. In most cases, the emitted light has a longer wavelength, and therefore a lower photon energy, than the absorbed radiation. A perceptible example of fluorescence occurs when the absorbed radiation is in the ultraviolet region of the electromagnetic spectrum (invisible to the human eye), while the emitted light is in the visible region; this gives the fluorescent substance a distinct color that can only be seen when the substance has been exposed to UV light. Fluorescent materials cease to glow nearly immediately when the radiation source stops, unlike phosphorescent materials, which continue to emit light for some time after.

Fluorescence has many practical applications, including mineralogy, gemology, medicine, chemical sensors (fluorescence spectroscopy), fluorescent labelling, dyes, biological detectors, cosmic-ray detection, vacuum fluorescent displays, and cathode-ray tubes. Its most common everyday application is in (gas-discharge) fluorescent lamps and LED lamps, in which fluorescent coatings convert UV or blue light into longer-wavelengths resulting in white light which can even appear indistinguishable from that of the traditional but energy- inefficient incandescent lamp.

Fluorescence also occurs frequently in nature in some minerals and in many biological forms across all kingdoms of life. The latter may be referred to as biofluorescence, indicating that the fluorophore is part of or is extracted from a living organism (rather than an inorganic dye or stain). But since fluorescence is due to a specific chemical, which can also be synthesized artificially in most cases, it is sufficient to describe the substance itself as fluorescent.

History

A cup made from the wood of the narra tree (Pterocarpus indicus) beside a flask containing its fluorescent solution Lignum nephriticum.
Matlaline, the fluorescent substance in the wood of the tree Eysenhardtia polystachya

An early observation of fluorescence was described in 1560 by Bernardino de Sahagún and in 1565 by Nicolás Monardes in the infusion known as lignum nephriticum (Latin for "kidney wood"). It was derived from the wood of two tree species, Pterocarpus indicus and Eysenhardtia polystachya.[1][2][3][4] The chemical compound responsible for this fluorescence is matlaline, which is the oxidation product of one of the flavonoids found in this wood.[1]

In 1819, E.D. Clarke[5] and in 1822 René Just Haüy[lower-alpha 1] described fluorescence in fluorites, Sir David Brewster described the phenomenon for chlorophyll in 1833[7] and Sir John Herschel did the same for quinine in 1845.[8][9]

In his 1852 paper on the "Refrangibility" (wavelength change) of light, George Gabriel Stokes described the ability of fluorspar and uranium glass to change invisible light beyond the violet end of the visible spectrum into blue light. He named this phenomenon fluorescence

"I am almost inclined to coin a word, and call the appearance fluorescence, from fluor-spar [i.e., fluorite], as the analogous term opalescence is derived from the name of a mineral."[10]:{{{1}}}

The name was derived from the mineral fluorite (calcium difluoride), some examples of which contain traces of divalent europium, which serves as the fluorescent activator to emit blue light. In a key experiment he used a prism to isolate ultraviolet radiation from sunlight and observed blue light emitted by an ethanol solution of quinine exposed by it.[lower-alpha 2]

Physical principles

Mechanism

A ruby ball lens atop a green laser-pointer. The green beam converges into a cone within the crystal and is focused to a point on top. The green light is absorbed and spontaneously remitted as red light. Not all of the light is absorbed, and a small portion of the 520 nm laser-light transmits through the top, unaltered by the ruby's red color.

Fluorescence occurs when an excited molecule, atom, or nanostructure, relaxes to a lower energy state (usually the ground state) through emission of a photon without a change in electron spin. When the initial and final states have different multiplicity (spin), the phenomenon is termed phosphorescence.

The ground state of most molecules is a singlet state, denoted as S0. A notable exception is molecular oxygen, which has a triplet ground state. Absorption of a photon of energy [math]\displaystyle{ h \nu_{ex} }[/math] results in an excited state of the same multiplicity (spin) of the ground state, usually a singlet (Sn with n > 0). In solution, states with n > 1 relax rapidly to the lowest vibrational level of the first excited state (S1) by transferring energy to the solvent molecules through non-radiative processes, including internal conversion followed by vibrational relaxation, in which the energy is dissipated as heat.[12] Therefore, most commonly, fluorescence occurs from the first singlet excited state, S1. Fluorescence is the emission of a photon accompanying the relaxation of the excited state to the ground state. Fluorescence photons are lower in energy ([math]\displaystyle{ h \nu_{em} }[/math]) compared to the energy of the photons used to generate the excited state ([math]\displaystyle{ h \nu_{ex} }[/math])

  • Excitation: [math]\displaystyle{ \mathrm{S}_0 + h \nu_{ex} \to \mathrm{S}_1 }[/math]
  • Fluorescence (emission): [math]\displaystyle{ \mathrm{S}_1 \to \mathrm{S}_0 + h \nu_{em} }[/math]

In each case the photon energy [math]\displaystyle{ E }[/math] is proportional to its frequency [math]\displaystyle{ \nu }[/math] according to [math]\displaystyle{ E=h\nu }[/math], where [math]\displaystyle{ h }[/math] is Planck's constant.

The excited state S1 can relax by other mechanisms that do not involve the emission of light. These processes, called non-radiative processes, compete with fluorescence emission and decrease its efficiency.[12] Examples include internal conversion, intersystem crossing to the triplet state, and energy transfer to another molecule. An example of energy transfer is Förster resonance energy transfer. Relaxation from an excited state can also occur through collisional quenching, a process where a molecule (the quencher) collides with the fluorescent molecule during its excited state lifetime. Molecular oxygen (O2) is an extremely efficient quencher of fluorescence just because of its unusual triplet ground state.

Quantum yield

The fluorescence quantum yield gives the efficiency of the fluorescence process. It is defined as the ratio of the number of photons emitted to the number of photons absorbed.[13]:{{{1}}}[12]

[math]\displaystyle{ \Phi = \frac {\text{Number of photons emitted}} {\text{Number of photons absorbed}} }[/math]

The maximum possible fluorescence quantum yield is 1.0 (100%); each photon absorbed results in a photon emitted. Compounds with quantum yields of 0.10 are still considered quite fluorescent. Another way to define the quantum yield of fluorescence is by the rate of excited state decay:

[math]\displaystyle{ \Phi = \frac{ { k}_{ f} }{ \sum_{i}{ k}_{i } } }[/math]

where [math]\displaystyle{ { k}_{ f} }[/math] is the rate constant of spontaneous emission of radiation and

[math]\displaystyle{ \sum_{i}{ k}_{i } }[/math]

is the sum of all rates of excited state decay. Other rates of excited state decay are caused by mechanisms other than photon emission and are, therefore, often called "non-radiative rates", which can include:

  • dynamic collisional quenching
  • near-field dipole-dipole interaction (or resonance energy transfer)
  • internal conversion
  • intersystem crossing

Thus, if the rate of any pathway changes, both the excited state lifetime and the fluorescence quantum yield will be affected.

Fluorescence quantum yields are measured by comparison to a standard.[14] The quinine salt quinine sulfate in a sulfuric acid solution was regarded as the most common fluorescence standard,[15] however, a recent study revealed that the fluorescence quantum yield of this solution is strongly affected by the temperature, and should no longer be used as the standard solution. The quinine in 0.1 M perchloric acid (Φ=0.60) shows no temperature dependence up to 45 °C, therefore it can be considered as a reliable standard solution.[16]

Lifetime

Jablonski diagram. After an electron absorbs a high-energy photon the system is excited electronically and vibrationally. The system relaxes vibrationally, and eventually fluoresces at a longer wavelength.

The fluorescence lifetime refers to the average time the molecule stays in its excited state before emitting a photon. Fluorescence typically follows first-order kinetics:

[math]\displaystyle{ \left[S_1 \right] = \left[S_1 \right]_0 e^{-\Gamma t} }[/math]

where [math]\displaystyle{ \left[S_1 \right] }[/math] is the concentration of excited state molecules at time [math]\displaystyle{ t }[/math], [math]\displaystyle{ \left[S_1 \right]_0 }[/math] is the initial concentration and [math]\displaystyle{ \Gamma }[/math] is the decay rate or the inverse of the fluorescence lifetime. This is an instance of exponential decay. Various radiative and non-radiative processes can de-populate the excited state. In such case the total decay rate is the sum over all rates:

[math]\displaystyle{ \Gamma_{tot}=\Gamma_{rad} + \Gamma_{nrad} }[/math]

where [math]\displaystyle{ \Gamma_{tot} }[/math] is the total decay rate, [math]\displaystyle{ \Gamma_{rad} }[/math] the radiative decay rate and [math]\displaystyle{ \Gamma_{nrad} }[/math] the non-radiative decay rate. It is similar to a first-order chemical reaction in which the first-order rate constant is the sum of all of the rates (a parallel kinetic model). If the rate of spontaneous emission, or any of the other rates are fast, the lifetime is short. For commonly used fluorescent compounds, typical excited state decay times for photon emissions with energies from the UV to near infrared are within the range of 0.5 to 20 nanoseconds. The fluorescence lifetime is an important parameter for practical applications of fluorescence such as fluorescence resonance energy transfer and fluorescence-lifetime imaging microscopy.

Jablonski diagram

The Jablonski diagram describes most of the relaxation mechanisms for excited state molecules. The diagram alongside shows how fluorescence occurs due to the relaxation of certain excited electrons of a molecule.[17]

Fluorescence anisotropy

Fluorophores are more likely to be excited by photons if the transition moment of the fluorophore is parallel to the electric vector of the photon.[13]:{{{1}}} The polarization of the emitted light will also depend on the transition moment. The transition moment is dependent on the physical orientation of the fluorophore molecule. For fluorophores in solution, the intensity and polarization of the emitted light is dependent on rotational diffusion. Therefore, anisotropy measurements can be used to investigate how freely a fluorescent molecule moves in a particular environment.

Fluorescence anisotropy can be defined quantitatively as

[math]\displaystyle{ r = {I_\parallel - I_\perp \over I_\parallel + 2I_\perp} }[/math]

where [math]\displaystyle{ I_\parallel }[/math] is the emitted intensity parallel to the polarization of the excitation light and [math]\displaystyle{ I_\perp }[/math] is the emitted intensity perpendicular to the polarization of the excitation light.[12]

Anisotropy is independent of the intensity of the absorbed or emitted light, it is the property of the light, so photobleaching of the dye will not affect the anisotropy value as long as the signal is detectable.

Fluorescence

Fluorescent security strip in a US twenty dollar bill under UV light

Strongly fluorescent pigments often have an unusual appearance which is often described colloquially as a "neon color" (originally "day-glo" in the late 1960s, early 1970s). This phenomenon was termed "Farbenglut" by Hermann von Helmholtz and "fluorence" by Ralph M. Evans. It is generally thought to be related to the high brightness of the color relative to what it would be as a component of white. Fluorescence shifts energy in the incident illumination from shorter wavelengths to longer (such as blue to yellow) and thus can make the fluorescent color appear brighter (more saturated) than it could possibly be by reflection alone.[18]

Rules

There are several general rules that deal with fluorescence. Each of the following rules have exceptions but they are useful guidelines for understanding fluorescence (these rules do not necessarily apply to two-photon absorption).

Kasha's rule

Kasha's rule states that the luminesce (fluorescence or phosphorescence) of a molecule will be emitted only from the lowest excited state of its given multiplicity. [19] Vavilov's rule (a logical extension of Kasha's rule thusly called Kasha–Vavilov rule) dictates that the quantum yield of luminescence is independent of the wavelength of exciting radiation and is proportional to the absorbance of the excited wavelength.[20] Kasha's rule does not always apply and is violated by simple molecules, such an example is azulene.[21] A somewhat more reliable statement, although still with exceptions, would be that the fluorescence spectrum shows very little dependence on the wavelength of exciting radiation.[22]

Mirror image rule

The fluorescent dye, rhodamine 6G, is commonly used in applications such as highlighter pens, dye lasers, and automotive leak detection. The absorption profile is a mirror of the emission profile.

For many fluorophores the absorption spectrum is a mirror image of the emission spectrum.[13]:{{{1}}} This is known as the mirror image rule and is related to the Franck–Condon principle which states that electronic transitions are vertical, that is energy changes without distance changing as can be represented with a vertical line in Jablonski diagram. This means the nucleus does not move and the vibration levels of the excited state resemble the vibration levels of the ground state.

Stokes shift

Main page: Physics:Stokes shift

In general, emitted fluorescence light has a longer wavelength and lower energy than the absorbed light.[13]:{{{1}}} This phenomenon, known as Stokes shift, is due to energy loss between the time a photon is absorbed and when a new one is emitted. The causes and magnitude of Stokes shift can be complex and are dependent on the fluorophore and its environment. However, there are some common causes. It is frequently due to non-radiative decay to the lowest vibrational energy level of the excited state. Another factor is that the emission of fluorescence frequently leaves a fluorophore in a higher vibrational level of the ground state.

In nature

Fluorescent coral
Main page: Biology:Fluorescence in the life sciences

There are many natural compounds that exhibit fluorescence, and they have a number of applications. Some deep-sea animals, such as the greeneye, have fluorescent structures.

Compared to bioluminescence and biophosphorescence

Fluorescence

Fluorescence is the phenomenon of absorption of electromagnetic radiation, typically from ultraviolet or visible light, by a molecule and the subsequent emission of a photon of a lower energy (smaller frequency, longer wavelength). This causes the light that is emitted to be a different color than the light that is absorbed. Stimulating light excites an electron to an excited state. When the molecule returns to the ground state, it releases a photon, which is the fluorescent emission. The excited state lifetime is short, so emission of light is typically only observable when the absorbing light is on. Fluorescence can be of any wavelength but is often more significant when emitted photons are in the visible spectrum. When it occurs in a living organism, it is sometimes called biofluorescence. Fluorescence should not be confused with bioluminescence and biophosphorescence.[23] Pumpkin toadlets that live in the Brazilian Atlantic forest are fluorescent.[24]

Bioluminescence

Bioluminescence differs from fluorescence in that it is the natural production of light by chemical reactions within an organism, whereas fluorescence is the absorption and reemission of light from the environment.[23] Fireflies and anglerfish are two examples of bioluminescent organisms.[25] To add to the potential confusion, some organisms are both bioluminescent and fluorescent, like the sea pansy Renilla reniformis, where bioluminescence serves as the light source for fluorescence.[26]

Phosphorescence

Phosphorescence is similar to fluorescence in its requirement of light wavelengths as a provider of excitation energy. The difference here lies in the relative stability of the energized electron. Unlike with fluorescence, in phosphorescence the electron retains stability, emitting light that continues to "glow-in-the-dark" even after the stimulating light source has been removed.[23] For example, glow-in-the-dark stickers are phosphorescent, but there are no truly biophosphorescent animals known.[27]

Mechanisms

Epidermal chromatophores

Pigment cells that exhibit fluorescence are called fluorescent chromatophores, and function somatically similar to regular chromatophores. These cells are dendritic, and contain pigments called fluorosomes. These pigments contain fluorescent proteins which are activated by K+ (potassium) ions, and it is their movement, aggregation, and dispersion within the fluorescent chromatophore that cause directed fluorescence patterning.[28][29] Fluorescent cells are innervated the same as other chromatophores, like melanophores, pigment cells that contain melanin. Short term fluorescent patterning and signaling is controlled by the nervous system.[28] Fluorescent chromatophores can be found in the skin (e.g. in fish) just below the epidermis, amongst other chromatophores.

Epidermal fluorescent cells in fish also respond to hormonal stimuli by the α–MSH and MCH hormones much the same as melanophores. This suggests that fluorescent cells may have color changes throughout the day that coincide with their circadian rhythm.[30] Fish may also be sensitive to cortisol induced stress responses to environmental stimuli, such as interaction with a predator or engaging in a mating ritual.[28]

Phylogenetics

Evolutionary origins

The incidence of fluorescence across the tree of life is widespread, and has been studied most extensively in cnidarians and fish. The phenomenon appears to have evolved multiple times in multiple taxa such as in the anguilliformes (eels), gobioidei (gobies and cardinalfishes), and tetradontiformes (triggerfishes), along with the other taxa discussed later in the article. Fluorescence is highly genotypically and phenotypically variable even within ecosystems, in regards to the wavelengths emitted, the patterns displayed, and the intensity of the fluorescence. Generally, the species relying upon camouflage exhibit the greatest diversity in fluorescence, likely because camouflage may be one of the uses of fluorescence.[31]

Observed occurrences of green and red biofluorescence in Actinopterygii
Fluorescence has multiple origins in the tree of life. This diagram displays the origins within actinopterygians (ray finned fish).

It is suspected by some scientists that GFPs and GFP-like proteins began as electron donors activated by light. These electrons were then used for reactions requiring light energy. Functions of fluorescent proteins, such as protection from the sun, conversion of light into different wavelengths, or for signaling are thought to have evolved secondarily.[32]

Adaptive functions

Currently, relatively little is known about the functional significance of fluorescence and fluorescent proteins.[32] However, it is suspected that fluorescence may serve important functions in signaling and communication, mating, lures, camouflage, UV protection and antioxidation, photoacclimation, dinoflagellate regulation, and in coral health.[33]

Aquatic

Water absorbs light of long wavelengths, so less light from these wavelengths reflects back to reach the eye. Therefore, warm colors from the visual light spectrum appear less vibrant at increasing depths. Water scatters light of shorter wavelengths above violet, meaning cooler colors dominate the visual field in the photic zone. Light intensity decreases 10 fold with every 75 m of depth, so at depths of 75 m, light is 10% as intense as it is on the surface, and is only 1% as intense at 150 m as it is on the surface. Because the water filters out the wavelengths and intensity of water reaching certain depths, different proteins, because of the wavelengths and intensities of light they are capable of absorbing, are better suited to different depths. Theoretically, some fish eyes can detect light as deep as 1000 m. At these depths of the aphotic zone, the only sources of light are organisms themselves, giving off light through chemical reactions in a process called bioluminescence.

Fluorescence is simply defined as the absorption of electromagnetic radiation at one wavelength and its reemission at another, lower energy wavelength.[31] Thus any type of fluorescence depends on the presence of external sources of light. Biologically functional fluorescence is found in the photic zone, where there is not only enough light to cause fluorescence, but enough light for other organisms to detect it.[34] The visual field in the photic zone is naturally blue, so colors of fluorescence can be detected as bright reds, oranges, yellows, and greens. Green is the most commonly found color in the marine spectrum, yellow the second most, orange the third, and red is the rarest. Fluorescence can occur in organisms in the aphotic zone as a byproduct of that same organism's bioluminescence. Some fluorescence in the aphotic zone is merely a byproduct of the organism's tissue biochemistry and does not have a functional purpose. However, some cases of functional and adaptive significance of fluorescence in the aphotic zone of the deep ocean is an active area of research.[35]

Photic zone

Main page: Earth:Photic zone
Fish
Fluorescent marine fish

Bony fishes living in shallow water generally have good color vision due to their living in a colorful environment. Thus, in shallow-water fishes, red, orange, and green fluorescence most likely serves as a means of communication with conspecifics, especially given the great phenotypic variance of the phenomenon.[31]

Many fish that exhibit fluorescence, such as sharks, lizardfish, scorpionfish, wrasses, and flatfishes, also possess yellow intraocular filters.[36] Yellow intraocular filters in the lenses and cornea of certain fishes function as long-pass filters. These filters enable the species to visualize and potentially exploit fluorescence, in order to enhance visual contrast and patterns that are unseen to other fishes and predators that lack this visual specialization.[31] Fish that possess the necessary yellow intraocular filters for visualizing fluorescence potentially exploit a light signal from members of it. Fluorescent patterning was especially prominent in cryptically patterned fishes possessing complex camouflage. Many of these lineages also possess yellow long-pass intraocular filters that could enable visualization of such patterns.[36]

Another adaptive use of fluorescence is to generate orange and red light from the ambient blue light of the photic zone to aid vision. Red light can only be seen across short distances due to attenuation of red light wavelengths by water.[37] Many fish species that fluoresce are small, group-living, or benthic/aphotic, and have conspicuous patterning. This patterning is caused by fluorescent tissue and is visible to other members of the species, however the patterning is invisible at other visual spectra. These intraspecific fluorescent patterns also coincide with intra-species signaling. The patterns present in ocular rings to indicate directionality of an individual's gaze, and along fins to indicate directionality of an individual's movement.[37] Current research suspects that this red fluorescence is used for private communication between members of the same species.[28][31][37] Due to the prominence of blue light at ocean depths, red light and light of longer wavelengths are muddled, and many predatory reef fish have little to no sensitivity for light at these wavelengths. Fish such as the fairy wrasse that have developed visual sensitivity to longer wavelengths are able to display red fluorescent signals that give a high contrast to the blue environment and are conspicuous to conspecifics in short ranges, yet are relatively invisible to other common fish that have reduced sensitivities to long wavelengths. Thus, fluorescence can be used as adaptive signaling and intra-species communication in reef fish.[37][38]

Additionally, it is suggested that fluorescent tissues that surround an organism's eyes are used to convert blue light from the photic zone or green bioluminescence in the aphotic zone into red light to aid vision.[37]

Sharks

A new fluorophore was described in two species of sharks, wherein it was due to an undescribed group of brominated tryptophane-kynurenine small molecule metabolites.[39]

Coral

Fluorescence serves a wide variety of functions in coral. Fluorescent proteins in corals may contribute to photosynthesis by converting otherwise unusable wavelengths of light into ones for which the coral's symbiotic algae are able to conduct photosynthesis.[40] Also, the proteins may fluctuate in number as more or less light becomes available as a means of photoacclimation.[41] Similarly, these fluorescent proteins may possess antioxidant capacities to eliminate oxygen radicals produced by photosynthesis.[42] Finally, through modulating photosynthesis, the fluorescent proteins may also serve as a means of regulating the activity of the coral's photosynthetic algal symbionts.[43]

Cephalopods

Alloteuthis subulata and Loligo vulgaris, two types of nearly transparent squid, have fluorescent spots above their eyes. These spots reflect incident light, which may serve as a means of camouflage, but also for signaling to other squids for schooling purposes.[44]

Jellyfish
Aequoria victoria, biofluorescent jellyfish known for GFP

Another, well-studied example of fluorescence in the ocean is the hydrozoan Aequorea victoria. This jellyfish lives in the photic zone off the west coast of North America and was identified as a carrier of green fluorescent protein (GFP) by Osamu Shimomura. The gene for these green fluorescent proteins has been isolated and is scientifically significant because it is widely used in genetic studies to indicate the expression of other genes.[45]

Mantis shrimp

Several species of mantis shrimp, which are stomatopod crustaceans, including Lysiosquillina glabriuscula, have yellow fluorescent markings along their antennal scales and carapace (shell) that males present during threat displays to predators and other males. The display involves raising the head and thorax, spreading the striking appendages and other maxillipeds, and extending the prominent, oval antennal scales laterally, which makes the animal appear larger and accentuates its yellow fluorescent markings. Furthermore, as depth increases, mantis shrimp fluorescence accounts for a greater part of the visible light available. During mating rituals, mantis shrimp actively fluoresce, and the wavelength of this fluorescence matches the wavelengths detected by their eye pigments.[46]

Aphotic zone

Main page: Earth:Aphotic zone
Siphonophores

Siphonophorae is an order of marine animals from the phylum Hydrozoa that consist of a specialized medusoid and polyp zooid. Some siphonophores, including the genus Erenna that live in the aphotic zone between depths of 1600 m and 2300 m, exhibit yellow to red fluorescence in the photophores of their tentacle-like tentilla. This fluorescence occurs as a by-product of bioluminescence from these same photophores. The siphonophores exhibit the fluorescence in a flicking pattern that is used as a lure to attract prey.[47]

Dragonfish

The predatory deep-sea dragonfish Malacosteus niger, the closely related genus Aristostomias and the species Pachystomias microdon use fluorescent red accessory pigments to convert the blue light emitted from their own bioluminescence to red light from suborbital photophores. This red luminescence is invisible to other animals, which allows these dragonfish extra light at dark ocean depths without attracting or signaling predators.[48]

Terrestrial

Amphibians

Fluorescent polka-dot tree frog under UV-light

Fluorescence is widespread among amphibians and has been documented in several families of frogs, salamanders and caecilians, but the extent of it varies greatly.[49]

The polka-dot tree frog (Hypsiboas punctatus), widely found in South America, was unintentionally discovered to be the first fluorescent amphibian in 2017. The fluorescence was traced to a new compound found in the lymph and skin glands.[50] The main fluorescent compound is Hyloin-L1 and it gives a blue-green glow when exposed to violet or ultraviolet light. The scientists behind the discovery suggested that the fluorescence can be used for communication. They speculated that fluorescence possibly is relatively widespread among frogs.[51] Only a few months later, fluorescence was discovered in the closely related Hypsiboas atlanticus. Because it is linked to secretions from skin glands, they can also leave fluorescent markings on surfaces where they have been.[52]

In 2019, two other frogs, the tiny pumpkin toadlet (Brachycephalus ephippium) and red pumpkin toadlet (B. pitanga) of southeastern Brazil, were found to have naturally fluorescent skeletons, which are visible through their skin when exposed to ultraviolet light.[53][54] It was initially speculated that the fluorescence supplemented their already aposematic colours (they are toxic) or that it was related to mate choice (species recognition or determining fitness of a potential partner),[53] but later studies indicate that the former explanation is unlikely, as predation attempts on the toadlets appear to be unaffected by the presence/absence of fluorescence.[55]

In 2020 it was confirmed that green or yellow fluorescence is widespread not only in adult frogs that are exposed to blue or ultraviolet light, but also among tadpoles, salamanders and caecilians. The extent varies greatly depending on species; in some it is highly distinct and in others it is barely noticeable. It can be based on their skin pigmentation, their mucous or their bones.[49]

Butterflies

Swallowtail (Papilio) butterflies have complex systems for emitting fluorescent light. Their wings contain pigment-infused crystals that provide directed fluorescent light. These crystals function to produce fluorescent light best when they absorb radiance from sky-blue light (wavelength about 420 nm). The wavelengths of light that the butterflies see the best correspond to the absorbance of the crystals in the butterfly's wings. This likely functions to enhance the capacity for signaling.[56]

Parrots

Parrots have fluorescent plumage that may be used in mate signaling. A study using mate-choice experiments on budgerigars (Melopsittacus undulates) found compelling support for fluorescent sexual signaling, with both males and females significantly preferring birds with the fluorescent experimental stimulus. This study suggests that the fluorescent plumage of parrots is not simply a by-product of pigmentation, but instead an adapted sexual signal. Considering the intricacies of the pathways that produce fluorescent pigments, there may be significant costs involved. Therefore, individuals exhibiting strong fluorescence may be honest indicators of high individual quality, since they can deal with the associated costs.[57]

Arachnids

Fluorescing scorpion

Spiders fluoresce under UV light and possess a huge diversity of fluorophores. Andrews, Reed, & Masta noted that spiders are the only known group in which fluorescence is "taxonomically widespread, variably expressed, evolutionarily labile, and probably under selection and potentially of ecological importance for intraspecific and interspecific signaling".[58] They showed that fluorescence evolved multiple times across spider taxa, with novel fluorophores evolving during spider diversification.

In some spiders, ultraviolet cues are important for predator-prey interactions, intraspecific communication, and camouflage-matching with fluorescent flowers. Differing ecological contexts could favor inhibition or enhancement of fluorescence expression, depending upon whether fluorescence helps spiders be cryptic or makes them more conspicuous to predators. Therefore, natural selection could be acting on expression of fluorescence across spider species.[58]

Scorpions are also fluorescent, in their case due to the presence of beta carboline in their cuticles.[59]

Platypus

In 2020 fluorescence was reported for several platypus specimens.[60]

Plants

Many plants are fluorescent due to the presence of chlorophyll, which is probably the most widely distributed fluorescent molecule, producing red emission under a range of excitation wavelengths.[61] This attribute of chlorophyll is commonly used by ecologists to measure photosynthetic efficiency.[62]

The Mirabilis jalapa flower contains violet, fluorescent betacyanins and yellow, fluorescent betaxanthins. Under white light, parts of the flower containing only betaxanthins appear yellow, but in areas where both betaxanthins and betacyanins are present, the visible fluorescence of the flower is faded due to internal light-filtering mechanisms. Fluorescence was previously suggested to play a role in pollinator attraction, however, it was later found that the visual signal by fluorescence is negligible compared to the visual signal of light reflected by the flower.[63]

Abiotic

Gemology, mineralogy and geology

Fluorescence of aragonite
Necklace of rough diamonds under UV light (top) and normal light (bottom)

Gemstones and minerals may have a distinctive fluorescence or may fluoresce differently under short-wave ultraviolet, long-wave ultraviolet, visible light, or X-rays.

Many types of calcite and amber will fluoresce under shortwave UV, longwave UV and visible light. Rubies, emeralds, and diamonds exhibit red fluorescence under long-wave UV, blue and sometimes green light; diamonds also emit light under X-ray radiation.

Fluorescence in minerals is caused by a wide range of activators. In some cases, the concentration of the activator must be restricted to below a certain level, to prevent quenching of the fluorescent emission. Furthermore, the mineral must be free of impurities such as iron or copper, to prevent quenching of possible fluorescence. Divalent manganese, in concentrations of up to several percent, is responsible for the red or orange fluorescence of calcite, the green fluorescence of willemite, the yellow fluorescence of esperite, and the orange fluorescence of wollastonite and clinohedrite. Hexavalent uranium, in the form of the uranyl cation (UO2+2), fluoresces at all concentrations in a yellow green, and is the cause of fluorescence of minerals such as autunite or andersonite, and, at low concentration, is the cause of the fluorescence of such materials as some samples of hyalite opal. Trivalent chromium at low concentration is the source of the red fluorescence of ruby. Divalent europium is the source of the blue fluorescence, when seen in the mineral fluorite. Trivalent lanthanides such as terbium and dysprosium are the principal activators of the creamy yellow fluorescence exhibited by the yttrofluorite variety of the mineral fluorite, and contribute to the orange fluorescence of zircon. Powellite (calcium molybdate) and scheelite (calcium tungstate) fluoresce intrinsically in yellow and blue, respectively. When present together in solid solution, energy is transferred from the higher-energy tungsten to the lower-energy molybdenum, such that fairly low levels of molybdenum are sufficient to cause a yellow emission for scheelite, instead of blue. Low-iron sphalerite (zinc sulfide), fluoresces and phosphoresces in a range of colors, influenced by the presence of various trace impurities.

Crude oil (petroleum) fluoresces in a range of colors, from dull-brown for heavy oils and tars through to bright-yellowish and bluish-white for very light oils and condensates. This phenomenon is used in oil exploration drilling to identify very small amounts of oil in drill cuttings and core samples.

Humic acids and fulvic acids produced by the degradation of organic matter in soils (humus) may also fluoresce because of the presence of aromatic cycles in their complex molecular structures.[64] Humic substances dissolved in groundwater can be detected and characterized by spectrofluorimetry.[65] [66] [67]

Organic liquids

Organic molecules found naturally in beer, such as tryptophan, tyrosine, and phenylalanine, fluoresce in green, ranging from 500 nm (light blue) to 600 nm (amber yellow) when illuminated with 450 nm (deep blue) laser light.[68]

Organic (carbon based) solutions such anthracene or stilbene, dissolved in benzene or toluene, fluoresce with ultraviolet or gamma ray irradiation. The decay times of this fluorescence are on the order of nanoseconds, since the duration of the light depends on the lifetime of the excited states of the fluorescent material, in this case anthracene or stilbene.[69]

Scintillation is defined a flash of light produced in a transparent material by the passage of a particle (an electron, an alpha particle, an ion, or a high-energy photon). Stilbene and derivatives are used in scintillation counters to detect such particles. Stilbene is also one of the gain mediums used in dye lasers.

Atmosphere

Fluorescence is observed in the atmosphere when the air is under energetic electron bombardment. In cases such as the natural aurora, high-altitude nuclear explosions, and rocket-borne electron gun experiments, the molecules and ions formed have a fluorescent response to light.[70]

Common materials that fluoresce

  • Vitamin B2 fluoresces yellow.
  • Tonic water fluoresces blue due to the presence of quinine.
  • Highlighter ink is often fluorescent due to the presence of pyranine.
  • Banknotes, postage stamps and credit cards often have fluorescent security features.

In novel technology

In August 2020 researchers reported the creation of the brightest fluorescent solid optical materials so far by enabling the transfer of properties of highly fluorescent dyes via spatial and electronic isolation of the dyes by mixing cationic dyes with anion-binding cyanostar macrocycles. According to a co-author these materials may have applications in areas such as solar energy harvesting, bioimaging, and lasers.[71][72][73][74]

Applications

Lighting

Further information: Physics:Fluorescent lamp and Physics:Blacklight
Fluorescent paint and plastic lit by UV-A lamps (blacklight). Paintings by Beo Beyond.

The common fluorescent lamp relies on fluorescence. Inside the glass tube is a partial vacuum and a small amount of mercury. An electric discharge in the tube causes the mercury atoms to emit mostly ultraviolet light. The tube is lined with a coating of a fluorescent material, called the phosphor, which absorbs ultraviolet light and re-emits visible light. Fluorescent lighting is more energy-efficient than incandescent lighting elements. However, the uneven spectrum of traditional fluorescent lamps may cause certain colors to appear different from when illuminated by incandescent light or daylight. The mercury vapor emission spectrum is dominated by a short-wave UV line at 254 nm (which provides most of the energy to the phosphors), accompanied by visible light emission at 436 nm (blue), 546 nm (green) and 579 nm (yellow-orange). These three lines can be observed superimposed on the white continuum using a hand spectroscope, for light emitted by the usual white fluorescent tubes. These same visible lines, accompanied by the emission lines of trivalent europium and trivalent terbium, and further accompanied by the emission continuum of divalent europium in the blue region, comprise the more discontinuous light emission of the modern trichromatic phosphor systems used in many compact fluorescent lamp and traditional lamps where better color rendition is a goal.[75]

Fluorescent lights were first available to the public at the 1939 New York World's Fair. Improvements since then have largely been better phosphors, longer life, and more consistent internal discharge, and easier-to-use shapes (such as compact fluorescent lamps). Some high-intensity discharge (HID) lamps couple their even-greater electrical efficiency with phosphor enhancement for better color rendition.[76]

White light-emitting diodes (LEDs) became available in the mid-1990s as LED lamps, in which blue light emitted from the semiconductor strikes phosphors deposited on the tiny chip. The combination of the blue light that continues through the phosphor and the green to red fluorescence from the phosphors produces a net emission of white light.[77]

Glow sticks sometimes utilize fluorescent materials to absorb light from the chemiluminescent reaction and emit light of a different color.[75]

Analytical chemistry

Many analytical procedures involve the use of a fluorometer, usually with a single exciting wavelength and single detection wavelength. Because of the sensitivity that the method affords, fluorescent molecule concentrations as low as 1 part per trillion can be measured.[78]

Fluorescence in several wavelengths can be detected by an array detector, to detect compounds from HPLC flow. Also, TLC plates can be visualized if the compounds or a coloring reagent is fluorescent. Fluorescence is most effective when there is a larger ratio of atoms at lower energy levels in a Boltzmann distribution. There is, then, a higher probability of excitement and release of photons by lower-energy atoms, making analysis more efficient.

Spectroscopy

Main page: Physics:Fluorescence spectroscopy

Usually the setup of a fluorescence assay involves a light source, which may emit many different wavelengths of light. In general, a single wavelength is required for proper analysis, so, in order to selectively filter the light, it is passed through an excitation monochromator, and then that chosen wavelength is passed through the sample cell. After absorption and re-emission of the energy, many wavelengths may emerge due to Stokes shift and various electron transitions. To separate and analyze them, the fluorescent radiation is passed through an emission monochromator, and observed selectively by a detector.[79]

Lasers

The internal cavity of a dye laser tuned to 589 nm. The green beam from a frequency-doubled Nd:YAG laser causes the dye solution to fluoresce in yellow, creating a beam between the array of mirrors.

Lasers most often use the fluorescence of certain materials as their active media, such as the red glow produced by a ruby (chromium sapphire), the infrared of titanium sapphire, or the unlimited range of colors produced by organic dyes. These materials normally fluoresce through a process called spontaneous emission, in which the light is emitted in all directions and often at many discrete spectral lines all at once. In many lasers, the fluorescent medium is "pumped" by exposing it to an intense light source, creating a population inversion, meaning that more of its atoms become in an excited state (high energy) rather than at ground state (low energy). When this occurs, the spontaneous fluorescence can then induce the other atoms to emit their photons in the same direction and at the same wavelength, creating stimulated emission. When a portion of the spontaneous fluorescence is trapped between two mirrors, nearly all of the medium's fluorescence can be stimulated to emit along the same line, producing a laser beam.[80]

Biochemistry and medicine

Main page: Biology:Fluorescence in the life sciences
Endothelial cells under the microscope with three separate channels marking specific cellular components

Fluorescence in the life sciences is used generally as a non-destructive way of tracking or analysis of biological molecules by means of the fluorescent emission at a specific frequency where there is no background from the excitation light, as relatively few cellular components are naturally fluorescent (called intrinsic or autofluorescence). In fact, a protein or other component can be "labelled" with an extrinsic fluorophore, a fluorescent dye that can be a small molecule, protein, or quantum dot, finding a large use in many biological applications.[13]:{{{1}}}

The quantification of a dye is done with a spectrofluorometer and finds additional applications in:

Microscopy

  • When scanning the fluorescence intensity across a plane one has fluorescence microscopy of tissues, cells, or subcellular structures, which is accomplished by labeling an antibody with a fluorophore and allowing the antibody to find its target antigen within the sample. Labelling multiple antibodies with different fluorophores allows visualization of multiple targets within a single image (multiple channels). DNA microarrays are a variant of this.
  • Immunology: An antibody is first prepared by having a fluorescent chemical group attached, and the sites (e.g., on a microscopic specimen) where the antibody has bound can be seen, and even quantified, by the fluorescence.
  • FLIM (Fluorescence Lifetime Imaging Microscopy) can be used to detect certain bio-molecular interactions that manifest themselves by influencing fluorescence lifetimes.
  • Cell and molecular biology: detection of colocalization using fluorescence-labelled antibodies for selective detection of the antigens of interest using specialized software such as ImageJ.

Other techniques

  • FRET (Förster resonance energy transfer, also known as fluorescence resonance energy transfer) is used to study protein interactions, detect specific nucleic acid sequences and used as biosensors, while fluorescence lifetime (FLIM) can give an additional layer of information.
  • Biotechnology: biosensors using fluorescence are being studied as possible Fluorescent glucose biosensors.
  • Automated sequencing of DNA by the chain termination method; each of four different chain terminating bases has its own specific fluorescent tag. As the labelled DNA molecules are separated, the fluorescent label is excited by a UV source, and the identity of the base terminating the molecule is identified by the wavelength of the emitted light.
  • FACS (fluorescence-activated cell sorting). One of several important cell sorting techniques used in the separation of different cell lines (especially those isolated from animal tissues).
  • DNA detection: the compound ethidium bromide, in aqueous solution, has very little fluorescence, as it is quenched by water. Ethidium bromide's fluorescence is greatly enhanced after it binds to DNA, so this compound is very useful in visualising the location of DNA fragments in agarose gel electrophoresis. Intercalated ethidium is in a hydrophobic environment when it is between the base pairs of the DNA, protected from quenching by water which is excluded from the local environment of the intercalated ethidium. Ethidium bromide may be carcinogenic – an arguably safer alternative is the dye SYBR Green.
  • FIGS (Fluorescence image-guided surgery) is a medical imaging technique that uses fluorescence to detect properly labeled structures during surgery.
  • Intravascular fluorescence is a catheter-based medical imaging technique that uses fluorescence to detect high-risk features of atherosclerosis and unhealed vascular stent devices.[81] Plaque autofluorescence has been used in a first-in-man study in coronary arteries in combination with optical coherence tomography.[82] Molecular agents has been also used to detect specific features, such as stent fibrin accumulation and enzymatic activity related to artery inflammation.[83]
  • SAFI (species altered fluorescence imaging) an imaging technique in electrokinetics and microfluidics.[84] It uses non-electromigrating dyes whose fluorescence is easily quenched by migrating chemical species of interest. The dye(s) are usually seeded everywhere in the flow and differential quenching of their fluorescence by analytes is directly observed.
  • Fluorescence-based assays for screening toxic chemicals. The optical assays consist of a mixture of environmental-sensitive fluorescent dyes and human skin cells that generate fluorescence spectra patterns.[85] This approach can reduce the need for laboratory animals in biomedical research and pharmaceutical industry.
  • Bone-margin detection: Alizarin-stained specimens and certain fossils can be lit by fluorescent lights to view anatomical structures, including bone margins.[86]

Forensics

Fingerprints can be visualized with fluorescent compounds such as ninhydrin or DFO (1,8-Diazafluoren-9-one). Blood and other substances are sometimes detected by fluorescent reagents, like fluorescein. Fibers, and other materials that may be encountered in forensics or with a relationship to various collectibles, are sometimes fluorescent.

Non-destructive testing

Fluorescent penetrant inspection is used to find cracks and other defects on the surface of a part. Dye tracing, using fluorescent dyes, is used to find leaks in liquid and gas plumbing systems.

Signage

Fluorescent colors are frequently used in signage, particularly road signs. Fluorescent colors are generally recognizable at longer ranges than their non-fluorescent counterparts, with fluorescent orange being particularly noticeable.[87] This property has led to its frequent use in safety signs and labels.

Optical brighteners

Main page: Physics:Optical brightener

Fluorescent compounds are often used to enhance the appearance of fabric and paper, causing a "whitening" effect. A white surface treated with an optical brightener can emit more visible light than that which shines on it, making it appear brighter. The blue light emitted by the brightener compensates for the diminishing blue of the treated material and changes the hue away from yellow or brown and toward white. Optical brighteners are used in laundry detergents, high brightness paper, cosmetics, high-visibility clothing and more.

See also


Footnotes

  1. ↑ Haüy (1822)[6] merely repeats Clarke's observation regarding the colors of the specimen of fluorite which Clarke had examined. Haüy calls fluorite chaux fluatée:
    "... violette par réflection, et verdâtre par transparence au Derbyshire."
    [(the color of fluorite is) violet by reflection, and greenish by transmission in Derbyshire (specimens)][6]:{{{1}}}
  2. ↑ Stokes (1852), pages 472–473.[10] In a footnote on page 473, Stokes acknowledges that in 1843, A.E. Becquerel had observed that quinine acid sulfate strongly absorbs ultraviolet radiation (i.e., solar radiation beyond Fraunhofer's H line in the solar spectrum). See ref.[11]

References

  1. ↑ 1.0 1.1 Acuña, A. Ulises; Amat-Guerri, Francisco; Morcillo, Purificación; Liras, Marta; Rodríguez, Benjamín (2009). "Structure and formation of the fluorescent compound of lignum nephriticum". Organic Letters 11 (14): 3020–3023. doi:10.1021/ol901022g. PMID 19586062. http://202.127.145.151/siocl/siocl_0001/HHJdatabank/090707ol-6.pdf. 
  2. ↑ "Lignum nephriticum". Annual report of the Board of Regents of the Smithsonian Institution. Washington, DC: U.S. Government Printing Office. 1916. pp. 271–298. https://archive.org/download/annualreportofbo1915smitfo/annualreportofbo1915smitfo.pdf. 
  3. ↑ Valeur, B.; Berberan-Santos, M.R.N. (2011). "A brief history of fluorescence and phosphorescence before the emergence of quantum theory". Journal of Chemical Education 88 (6): 731–738. doi:10.1021/ed100182h. Bibcode: 2011JChEd..88..731V. 
  4. ↑ Muyskens, M.; Vitz, Ed (2006). "The fluorescence of lignum nephriticum: A flash back to the past and a simple demonstration of natural substance fluorescence". Journal of Chemical Education 83 (5): 765. doi:10.1021/ed083p765. Bibcode: 2006JChEd..83..765M. 
  5. ↑ "Account of a newly discovered variety of green fluor spar, of very uncommon beauty, and with remarkable properties of colour and phosphorescence". The Annals of Philosophy 14: 34–36. 1819. https://books.google.com/books?id=KWc7AQAAIAAJ&pg=PA34. "The finer crystals are perfectly transparent. Their colour by transmitted light is an intense emerald green; but by reflected light, the colour is a deep sapphire blue.". 
  6. ↑ 6.0 6.1 (in fr) Traité de Minéralogie. 1 (2nd ed.). Paris, France: Bachelier and Huzard. 1822. p. 512. https://books.google.com/books?id=MvcTAAAAQAAJ. 
  7. ↑ "On the colours of natural bodies". Transactions of the Royal Society of Edinburgh 12 (2): 538–545, esp. 542. 1834. doi:10.1017/s0080456800031203. https://books.google.com/books?id=I_UQAAAAIAAJ&pg=PA538.  On page 542, Brewster mentions that when white light passes through an alcohol solution of chlorophyll, red light is reflected from it.
  8. ↑ "On a case of superficial colour presented by a homogeneous liquid internally colourless". Philosophical Transactions of the Royal Society of London 135: 143–145. 1845. doi:10.1098/rstl.1845.0004. https://books.google.com/books?id=GmwOAAAAIAAJ&pg=PA143. 
  9. ↑ "On the epipŏlic dispersion of light, being a supplement to a paper entitled, "On a case of superficial colour presented by a homogeneous liquid internally colourless"". Philosophical Transactions of the Royal Society of London 135: 147–153. 1845. doi:10.1098/rstl.1845.0005. https://books.google.com/books?id=GmwOAAAAIAAJ&pg=PA147. 
  10. ↑ 10.0 10.1 "On the change of refrangibility of light". Philosophical Transactions of the Royal Society of London 142: 463–562, esp.  479. 1852. doi:10.1098/rstl.1852.0022. https://books.google.com/books?id=CE9FAAAAcAAJ&pg=PA463. 
  11. ↑ "Des effets produits sur les corps par les rayons solaires" (in fr). Comptes rendus 17: 882–884, esp. 883. 1843. http://gallica.bnf.fr/ark:/12148/bpt6k2976b/f894.image.  Becquerel cites quinine acid sulfate (sulfate acide de quinine) as strongly absorbing ultraviolet light.
  12. ↑ 12.0 12.1 12.2 12.3 Valeur, Bernard; Berberan-Santos, Mario (2012). Molecular Fluorescence: Principles and applications. Wiley-VCH. p. 64. ISBN 978-3-527-32837-6. 
  13. ↑ 13.0 13.1 13.2 13.3 13.4
    Lakowicz, Joseph R. (1999). Principles of Fluorescence Spectroscopy. Kluwer Academic / Plenum Publishers. ISBN 978-0-387-31278-1. 
  14. ↑ Levitus, Marcia (2020-04-22). "Tutorial: measurement of fluorescence spectra and determination of relative fluorescence quantum yields of transparent samples". Methods and Applications in Fluorescence 8 (3): 033001. doi:10.1088/2050-6120/ab7e10. ISSN 2050-6120. PMID 32150732. Bibcode: 2020MApFl...8c3001L. https://doi.org/10.1088/2050-6120/ab7e10. Retrieved 9 June 2021. 
  15. ↑ Brouwer, Albert M. (2011-08-31). "Standards for photoluminescence quantum yield measurements in solution". Pure and Applied Chemistry. IUPAC Technical Report 83 (12): 2213–2228. doi:10.1351/PAC-REP-10-09-31. ISSN 1365-3075. 
  16. ↑ Nawara, Krzysztof; Waluk, Jacek (2019-04-16). "Goodbye to quinine in sulfuric acid solutions as a fluorescence quantum yield standard" (in en). Analytical Chemistry 91 (8): 5389–5394. doi:10.1021/acs.analchem.9b00583. ISSN 0003-2700. PMID 30907575. https://pubs.acs.org/doi/10.1021/acs.analchem.9b00583. 
  17. ↑ "Animation for the Principle of Fluorescence and UV-Visible Absorbance" . PharmaXChange.info.
  18. ↑ Schieber, Frank (October 2001). "Modeling the Appearance of Fluorescent Colors". Proceedings of the Human Factors and Ergonomics Society Annual Meeting 45 (18): 1324–1327. doi:10.1177/154193120104501802. 
  19. ↑ IUPAC.PAC, 2007, 79, 293. (Glossary of terms used in photochemistry, 3rd edition (IUPAC Recommendations 2006)) on page 360 https://goldbook.iupac.org/terms/view/K03370
  20. ↑ IUPAC. – Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") . Compiled by McNaught, A.D. and Wilkinson, A. Blackwell Scientific Publications, Oxford, 1997.
  21. ↑ Excited-State (Anti)Aromaticity Explains Why Azulene Disobeys Kasha’s Rule David Dunlop, Lucie Ludvíková, Ambar Banerjee, Henrik Ottosson, and Tomáš Slanina Journal of the American Chemical Society 2023 145 (39), 21569-21575 DOI: 10.1021/jacs.3c07625
  22. ↑ Qian, Hai; Cousins, Morgan E.; Horak, Erik H.; Wakefield, Audrey; Liptak, Matthew D.; Aprahamian, Ivan (January 2017). "Suppression of Kasha's rule as a mechanism for fluorescent molecular rotors and aggregation-induced emission" (in en). Nature Chemistry 9 (1): 83–87. doi:10.1038/nchem.2612. ISSN 1755-4330. PMID 27995926. https://www.nature.com/articles/nchem.2612. 
  23. ↑ 23.0 23.1 23.2 "Fluorescence in marine organisms". http://gestaltswitchexpeditions.com/fluorescence-in-marine-orga/. 
  24. ↑ "Fluorescence discovered in tiny Brazilian frogs". Business Standard India. Press Trust of India. 2019-03-29. https://www.business-standard.com/article/pti-stories/fluorescence-discovered-in-tiny-brazilian-frogs-119032900584_1.html. 
  25. ↑ Utsav (2017-12-02). "Top 10 Amazing Bioluminescent Animals on Planet Earth" (in en-US). https://earthnworld.com/top-10-amazing-bioluminescent-animals-planet-earth/. 
  26. ↑ Ward, William W.; Cormier, Milton J. (1978). "Energy Transfer Via Protein-Protein Interaction in Renilla Bioluminescence". Photochemistry and Photobiology 27 (4): 389–396. doi:10.1111/j.1751-1097.1978.tb07621.x. 
  27. ↑ "Firefly Squid - Deep Sea Creatures on Sea and Sky". http://www.seasky.org/deep-sea/firefly-squid.html. 
  28. ↑ 28.0 28.1 28.2 28.3 Wucherer, M. F.; Michiels, N. K. (2012). "A Fluorescent Chromatophore Changes the Level of Fluorescence in a Reef Fish". PLOS ONE 7 (6): e37913. doi:10.1371/journal.pone.0037913. PMID 22701587. Bibcode: 2012PLoSO...737913W. 
  29. ↑ Fujii, R (2000). "The regulation of motile activity in fish chromatophores". Pigment Cell Research 13 (5): 300–19. doi:10.1034/j.1600-0749.2000.130502.x. PMID 11041206. 
  30. ↑ Abbott, F. S. (1973). "Endocrine Regulation of Pigmentation in Fish". Integrative and Comparative Biology 13 (3): 885–894. doi:10.1093/icb/13.3.885. 
  31. ↑ 31.0 31.1 31.2 31.3 31.4 Sparks, J. S.; Schelly, R. C.; Smith, W. L.; Davis, M. P.; Tchernov, D.; Pieribone, V. A.; Gruber, D. F. (2014). Fontaneto, Diego. ed. "The Covert World of Fish Biofluorescence: A Phylogenetically Widespread and Phenotypically Variable Phenomenon". PLOS ONE 9 (1): e83259. doi:10.1371/journal.pone.0083259. PMID 24421880. Bibcode: 2014PLoSO...983259S. 
  32. ↑ 32.0 32.1 Beyer, Steffen. "Biology of underwater fluorescence". https://translate.google.com/translate?sl=de&tl=en&prev=_t&hl=en&ie=UTF-8&u=http://www.fluopedia.org/publications/deutsch/biologie/. 
  33. ↑ Haddock, S. H. D.; Dunn, C. W. (2015). "Fluorescent proteins function as a prey attractant: experimental evidence from the hydromedusa Olindias formosus and other marine organisms". Biology Open 4 (9): 1094–1104. doi:10.1242/bio.012138. ISSN 2046-6390. PMID 26231627. 
  34. ↑ Mazel, Charles (2017). "Method for Determining the Contribution of Fluorescence to an Optical Signature, with Implications for Postulating a Visual Function". Frontiers in Marine Science 4. doi:10.3389/fmars.2017.00266. ISSN 2296-7745. 
  35. ↑ Matz, M.. "Fluorescence: The Secret Color of the Deep". Office of Ocean Exploration and Research, U.S. National Oceanic and Atmospheric Administration. http://oceanexplorer.noaa.gov/explorations/05deepscope/background/fluorescence/fluorescence.html. 
  36. ↑ 36.0 36.1 Heinermann, P (2014-03-10). "Yellow intraocular filters in fishes". Experimental Biology 43 (2): 127–147. PMID 6398222. 
  37. ↑ 37.0 37.1 37.2 37.3 37.4 Michiels, N. K.; Anthes, N.; Hart, N. S.; Herler, J. R.; Meixner, A. J.; Schleifenbaum, F.; Schulte, G.; Siebeck, U. E. et al. (2008). "Red fluorescence in reef fish: A novel signalling mechanism?". BMC Ecology 8 (1): 16. doi:10.1186/1472-6785-8-16. PMID 18796150. Bibcode: 2008BMCE....8...16M. 
  38. ↑ Gerlach, T; Sprenger, D; Michiels, N. K. (2014). "Fairy wrasses perceive and respond to their deep red fluorescent coloration". Proceedings of the Royal Society B: Biological Sciences 281 (1787): 20140787. doi:10.1098/rspb.2014.0787. PMID 24870049. 
  39. ↑ Park, Hyun Bong; Lam, Yick Chong; Gaffney, Jean P.; Weaver, James C.; Krivoshik, Sara Rose; Hamchand, Randy; Pieribone, Vincent; Gruber, David F. et al. (2019-09-27). "Bright Green Biofluorescence in Sharks Derives from Bromo-Kynurenine Metabolism" (in en). iScience 19: 1291–1336. doi:10.1016/j.isci.2019.07.019. ISSN 2589-0042. PMID 31402257. Bibcode: 2019iSci...19.1291P. 
  40. ↑ Salih, A.; Larkum, A.; Cox, G.; Kühl, M.; Hoegh-Guldberg, O. (2000). "Fluorescent pigments in corals are photoprotective". Nature 408 (6814): 850–3. doi:10.1038/35048564. PMID 11130722. Bibcode: 2000Natur.408..850S. https://www.researchgate.net/publication/12197663. 
  41. ↑ Roth, M. S.; Latz, M. I.; Goericke, R.; Deheyn, D. D. (2010). "Green fluorescent protein regulation in the coral Acropora yongei during photoacclimation". Journal of Experimental Biology 213 (21): 3644–3655. doi:10.1242/jeb.040881. PMID 20952612. 
  42. ↑ Bou-Abdallah, F.; Chasteen, N. D.; Lesser, M. P. (2006). "Quenching of superoxide radicals by green fluorescent protein". Biochimica et Biophysica Acta (BBA) - General Subjects 1760 (11): 1690–1695. doi:10.1016/j.bbagen.2006.08.014. PMID 17023114. 
  43. ↑ Field, S. F.; Bulina, M. Y.; Kelmanson, I. V.; Bielawski, J. P.; Matz, M. V. (2006). "Adaptive Evolution of Multicolored Fluorescent Proteins in Reef-Building Corals". Journal of Molecular Evolution 62 (3): 332–339. doi:10.1007/s00239-005-0129-9. PMID 16474984. Bibcode: 2006JMolE..62..332F. 
  44. ↑ Mäthger, L. M.; Denton, E. J. (2001). "Reflective properties of iridophores and fluorescent 'eyespots' in the loliginid squid Alloteuthis subulata and Loligo vulgaris". The Journal of Experimental Biology 204 (Pt 12): 2103–18. doi:10.1242/jeb.204.12.2103. PMID 11441052. http://jeb.biologists.org/content/204/12/2103.short. 
  45. ↑ Tsien, R. Y. (1998). "The Green Fluorescent Protein". Annual Review of Biochemistry 67: 509–544. doi:10.1146/annurev.biochem.67.1.509. PMID 9759496. 
  46. ↑ Mazel, C. H. (2004). "Fluorescent Enhancement of Signaling in a Mantis Shrimp". Science 303 (5654): 51. doi:10.1126/science.1089803. PMID 14615546. 
  47. ↑ Bou-Abdallah, F.; Chasteen, N. D.; Lesser, M. P. (2006). "Quenching of superoxide radicals by green fluorescent protein". Biochimica et Biophysica Acta (BBA) - General Subjects 1760 (11): 1690–1695. doi:10.1016/j.bbagen.2006.08.014. PMID 17023114. 
  48. ↑ Douglas, R. H.; Partridge, J. C.; Dulai, K.; Hunt, D.; Mullineaux, C. W.; Tauber, A. Y.; Hynninen, P. H. (1998). "Dragon fish see using chlorophyll". Nature 393 (6684): 423–424. doi:10.1038/30871. Bibcode: 1998Natur.393..423D. 
  49. ↑ 49.0 49.1 Lamb, J.Y.; M.P. Davis (2020). "Salamanders and other amphibians are aglow with biofluorescence". Scientific Reports 10 (1): 2821. doi:10.1038/s41598-020-59528-9. PMID 32108141. Bibcode: 2020NatSR..10.2821L. 
  50. ↑ Wong, Sam (13 March 2017). "Luminous frog is the first known naturally fluorescent amphibian". https://www.newscientist.com/article/2124466-luminous-frog-is-the-first-known-naturally-fluorescent-amphibian/. 
  51. ↑ King, Anthony (13 March 2017). "Fluorescent frog first down to new molecule". https://www.chemistryworld.com/news/fluorescent-frog-first-down-to-new-molecule-/2500541.article. 
  52. ↑ Taboada, C.; A.E. Brunetti; C. Alexandre; M.G. Lagorio; J. Faivovich (2017). "Fluorescent Frogs: A Herpetological Perspective". South American Journal of Herpetology 12 (1): 1–13. doi:10.2994/SAJH-D-17-00029.1. 
  53. ↑ 53.0 53.1 Sandra Goutte; Matthew J. Mason; Marta M. Antoniazzi; Carlos Jared; Didier Merle; Lilian Cazes; Luís Felipe Toledo; Hanane el-Hafci et al. (2019). "Intense bone fluorescence reveals hidden patterns in pumpkin toadlets". Scientific Reports 9 (1): 5388. doi:10.1038/s41598-019-41959-8. PMID 30926879. Bibcode: 2019NatSR...9.5388G. 
  54. ↑ Fox, A. (2 April 2019). "Scientists discover a frog with glowing bones". https://www.science.org/content/article/scientists-discover-frog-glowing-bones. 
  55. ↑ Rebouças, R.; A.B. Carollo; M.d.O. Freitas; C. Lambertini; R.M. Nogueira dos Santos; L.F. Toledo (2019). "Conservation Status of Brachycephalus Toadlets (Anura: Brachycephalidae) from the Brazilian Atlantic Rainforest". Diversity 55 (1): 39–47. doi:10.3390/d11090150. 
  56. ↑ Vukusic, P; Hooper, I (2005). "Directionally controlled fluorescence emission in butterflies". Science 310 (5751): 1151. doi:10.1126/science.1116612. PMID 16293753. 
  57. ↑ Arnold, K. E. (2002). "Fluorescent Signaling in Parrots". Science 295 (5552): 92. doi:10.1126/science.295.5552.92. PMID 11778040. 
  58. ↑ 58.0 58.1 Andrews, K.; Reed, S.M.; Masta, S.E. (2007). "Spiders fluoresce variably across many taxa". Biology Letters 3 (3): 265–267. doi:10.1098/rsbl.2007.0016. PMID 17412670. 
  59. ↑ Stachel, S.J.; Stockwell, S.A.; van Vranken, D.L. (1999). "The fluorescence of scorpions and cataractogenesis". Chemistry & Biology 6 (8): 531–539. doi:10.1016/S1074-5521(99)80085-4. PMID 10421760. 
  60. ↑ Spaeth, P. (2020). "Biofluorescence in the platypus (Ornithorhynchus anatinus)". Mammalia 85 (2): 179–181. doi:10.1515/mammalia-2020-0027. 
  61. ↑ McDonald, Maurice S. (2003-06-02) (in en). Photobiology of Higher Plants. John Wiley & Sons. ISBN 9780470855232. https://books.google.com/books?id=x2PZRC6Zd5sC&q=Chlorophyll+fluoresces+a+weak+red+under+ultraviolet+light.&pg=PA12. 
  62. ↑ "5.1 Chlorophyll fluorescence – ClimEx Handbook" (in en-US). https://climexhandbook.w.uib.no/2019/11/03/chlorophyll-fluorescence/. 
  63. ↑ Iriel, A. A.; Lagorio, M. A. G. (2010). "Is the flower fluorescence relevant in biocommunication?". Naturwissenschaften 97 (10): 915–924. doi:10.1007/s00114-010-0709-4. PMID 20811871. Bibcode: 2010NW.....97..915I. 
  64. ↑ Mobed, Jarafshan J.; Hemmingsen, Sherry L.; Autry, Jennifer L.; McGown, Linda B. (1996-09-01). "Fluorescence characterization of IHSS humic substances: Total luminescence spectra with absorbance correction". Environmental Science & Technology 30 (10): 3061–3065. doi:10.1021/es960132l. ISSN 0013-936X. Bibcode: 1996EnST...30.3061M. https://doi.org/10.1021/es960132l. Retrieved 2021-08-29. 
  65. ↑ Milori, Débora MBP; Martin-Neto, Ladislau; Bayer, Cimélio; Mielniczuk, João; Bagnato, Vanderlei S (2002). "Humification degree of soil humic acids determined by fluorescence spectroscopy". Soil Science 167 (11): 739–749. doi:10.1097/00010694-200211000-00004. ISSN 0038-075X. Bibcode: 2002SoilS.167..739M. 
  66. ↑ Richard, C; Trubetskaya, O; Trubetskoj, O; Reznikova, O; Afanas' Eva, G; Aguer, J-P; Guyot, G (2004). "Key role of the low molecular size fraction of soil humic acids for fluorescence and photoinductive activity". Environmental Science & Technology 38 (7): 2052–2057. doi:10.1021/es030049f. ISSN 0013-936X. PMID 15112806. Bibcode: 2004EnST...38.2052R. 
  67. ↑ Sierra, MMD; Giovanela, M; Parlanti, E; Soriano-Sierra, EJ (2005). "Fluorescence fingerprint of fulvic and humic acids from varied origins as viewed by single-scan and excitation/emission matrix techniques". Chemosphere 58 (6): 715–733. doi:10.1016/j.chemosphere.2004.09.038. ISSN 0045-6535. PMID 15621185. Bibcode: 2005Chmsp..58..715S. 
  68. ↑ The Parallel Factor Analysis of Beer Fluorescence by Tatjana Dramićanin, Ivana Zeković, Jovana Periša & Miroslav D. Dramićanin
  69. ↑ Birks, J. B. (1962). "The Fluorescence and Scintillation Decay Times of Crystalline Anthracene". Proceedings of the Physical Society 79 (3): 494–496. doi:10.1088/0370-1328/79/3/306. Bibcode: 1962PPS....79..494B. 
  70. ↑ Gilmore, F. R.; Laher, R. R.; Espy, P. J. (1992). "Franck–Condon Factors, r-Centroids, Electronic Transition Moments, and Einstein Coefficients for Many Nitrogen and Oxygen Band Systems". Journal of Physical and Chemical Reference Data 21 (5): 1005. doi:10.1063/1.555910. Bibcode: 1992JPCRD..21.1005G. https://apps.dtic.mil/sti/citations/ADA246065. 
  71. ↑ "Chemists create the brightest-ever fluorescent materials" (in en). phys.org. https://phys.org/news/2020-08-chemists-brightest-ever-fluorescent-materials.html. 
  72. ↑ "Scientists create the brightest fluorescent materials in existence". New Atlas. 7 August 2020. https://newatlas.com/materials/brightest-fluorescent-material-existence/. 
  73. ↑ "Scientists create 'brightest known materials in existence'" (in en). independent.co.uk. https://www.independent.co.uk/life-style/gadgets-and-tech/news/brightest-material-ever-fluorescent-light-a9657221.html. 
  74. ↑ Benson, Christopher R.; Kacenauskaite, Laura; VanDenburgh, Katherine L.; Zhao, Wei; Qiao, Bo; Sadhukhan, Tumpa; Pink, Maren; Chen, Junsheng et al. (6 August 2020). "Plug-and-Play Optical Materials from Fluorescent Dyes and Macrocycles" (in en). Chem 6 (8): 1978–1997. doi:10.1016/j.chempr.2020.06.029. ISSN 2451-9294. 
  75. ↑ 75.0 75.1 Harris, Tom (2001-12-07). "How Fluorescent Lamps Work". HowStuffWorks. Discovery Communications. http://home.howstuffworks.com/fluorescent-lamp.htm. 
  76. ↑ Flesch, P. (2006). Light and light sources : high-intensity discharge lamps. Berlin: Springer-Verlag. ISBN 978-3-540-32685-4. OCLC 262693002. https://www.worldcat.org/oclc/262693002. 
  77. ↑ Chen, Lei; Lin, Chun-Che; Yeh, Chiao-Wen; Liu, Ru-Shi (2010-03-22). "Light Converting Inorganic Phosphors for White Light-Emitting Diodes". Materials 3 (3): 2172–2195. doi:10.3390/ma3032172. ISSN 1996-1944. Bibcode: 2010Mate....3.2172C. 
  78. ↑ Rye, H. S.; Dabora, J. M.; Quesada, M. A.; Mathies, R. A.; Glazer, A. N. (1993). "Fluorometric Assay Using Dimeric Dyes for Double- and Single-Stranded DNA and RNA with Picogram Sensitivity". Analytical Biochemistry 208 (1): 144–150. doi:10.1006/abio.1993.1020. PMID 7679561. 
  79. ↑ Harris, Daniel C. (2004). Exploring chemical analysis. Macmillan. ISBN 978-0-7167-0571-0. https://books.google.com/books?id=x5eEW76lizEC. 
  80. ↑ Fundamental and Details of Laser Welding by Seiji Katayama -- Springer 2020 Page 3--5
  81. ↑ "Intravascular near-infrared fluorescence molecular imaging of atherosclerosis: toward coronary arterial visualization of biologically high-risk plaques.". J Biomed Opt 15 (1): 011107–011107–6. 2010. doi:10.1117/1.3280282. PMID 20210433. Bibcode: 2010JBO....15a1107C. 
  82. ↑ "Clinical Characterization of Coronary Atherosclerosis With Dual-Modality OCT and Near-Infrared Autofluorescence Imaging". JACC Cardiovasc Imaging 9 (11): 1304–1314. 2016. doi:10.1016/j.jcmg.2015.11.020. PMID 26971006. 
  83. ↑ "Intravascular fibrin molecular imaging improves the detection of unhealed stents assessed by optical coherence tomography in vivo". Eur Heart J 38 (6): 447–455. 2015. doi:10.1093/eurheartj/ehv677. PMID 26685129. 
  84. ↑ Shkolnikov, V; Santiago, J. G. (2013). "A method for non-invasive full-field imaging and quantification of chemical species". Lab on a Chip 13 (8): 1632–43. doi:10.1039/c3lc41293h. PMID 23463253. https://microfluidics.stanford.edu/Publications/ParticleTracking_Diagnostics/Shkolnikov_A%20method%20for%20non-invasive%20full-field%20imaging%20and%20quantification%20of%20chemical%20species.pdf. 
  85. ↑ Moczko, E; Mirkes, EM; Cáceres, C; Gorban, AN; Piletsky, S (2016). "Fluorescence-based assay as a new screening tool for toxic chemicals". Scientific Reports 6: 33922. doi:10.1038/srep33922. PMID 27653274. Bibcode: 2016NatSR...633922M. 
  86. ↑ Smith, W. Leo; Buck, Chesney A.; Ornay, Gregory S.; Davis, Matthew P.; Martin, Rene P.; Gibson, Sarah Z.; Girard, Matthew G. (2018-08-20). "Improving Vertebrate Skeleton Images: Fluorescence and the Non-Permanent Mounting of Cleared-and-Stained Specimens" (in en-US). Copeia 106 (3): 427–435. doi:10.1643/cg-18-047. ISSN 0045-8511. 
  87. ↑ Hawkins, H. Gene; Carlson, Paul John and Elmquist, Michael (2000) "Evaluation of fluorescent orange signs" , Texas Transportation Institute Report 2962-S.

Further reading

External links



Retrieved from "https://handwiki.org/wiki/index.php?title=Biology:Fluorescence&oldid=3565545"