Johnson solid

From HandWiki
Short description: 92 non-uniform convex polyhedra, with each face a regular polygon
The elongated square gyrobicupola (J37), a Johnson solid
This 24 equilateral triangle example is not a Johnson solid because it is not convex
This 24-square example is not a Johnson solid because it is not strictly convex (has 180° dihedral angles)

In geometry, a Johnson solid is a strictly convex polyhedron each face of which is a regular polygon. There is no requirement that each face must be the same polygon, or that the same polygons join around each vertex. An example of a Johnson solid is the square-based pyramid with equilateral sides (J1); it has 1 square face and 4 triangular faces. Some authors require that the solid not be uniform (i.e., not Platonic solid, Archimedean solid, uniform prism, or uniform antiprism) before they refer to it as a "Johnson solid".

As in any strictly convex solid, at least three faces meet at every vertex, and the total of their angles is less than 360 degrees. Since a regular polygon has angles at least 60 degrees, it follows that at most five faces meet at any vertex. The pentagonal pyramid (J2) is an example that has a degree-5 vertex.

Although there is no obvious restriction that any given regular polygon cannot be a face of a Johnson solid, it turns out that the faces of Johnson solids which are not uniform (i.e., not a Platonic solid, Archimedean solid, uniform prism, or uniform antiprism) always have 3, 4, 5, 6, 8, or 10 sides.

In 1966, Norman Johnson published a list which included all 92 Johnson solids (excluding the 5 Platonic solids, the 13 Archimedean solids, the infinitely many uniform prisms, and the infinitely many uniform antiprisms), and gave them their names and numbers. He did not prove that there were only 92, but he did conjecture that there were no others. Victor Zalgaller in 1969 proved that Johnson's list was complete.

Of the Johnson solids, the elongated square gyrobicupola (J37), also called the pseudorhombicuboctahedron,[1] is unique in being locally vertex-uniform: there are 4 faces at each vertex, and their arrangement is always the same: 3 squares and 1 triangle. However, it is not vertex-transitive, as it has different isometry at different vertices, making it a Johnson solid rather than an Archimedean solid.

Names

The naming of Johnson solids follows a flexible and precise descriptive formula, such that many solids can be named in different ways without compromising their accuracy as a description. Most Johnson solids can be constructed from the first few (pyramids, cupolae, and rotundas), together with the Platonic and Archimedean solids, prisms, and antiprisms; the centre of a particular solid's name will reflect these ingredients. From there, a series of prefixes are attached to the word to indicate additions, rotations, and transformations:

  • Bi-[<>] indicates that two copies of the solid in question are joined base-to-base. For cupolae and rotundas, the solids can be joined so that either like faces (ortho-) or unlike faces (gyro-[*]) meet. Using this nomenclature, an octahedron can be described as a square bipyramid[4<>], a cuboctahedron as a triangular gyrobicupola[3cc*], and an icosidodecahedron as a pentagonal gyrobirotunda[5rr*].
  • Elongated[=] indicates a prism is joined to the base of the solid in question, or between the bases in the case of Bi- solids. A rhombicuboctahedron can thus be described as an elongated square orthobicupola.
  • Gyroelongated[z] indicates an antiprism is joined to the base of the solid in question or between the bases in the case of Bi- solids. An icosahedron can thus be described as a gyroelongated pentagonal bipyramid.
  • Augmented[+] indicates another polyhedron, namely a pyramid or cupola, is joined to one or more faces of the solid in question.
  • Diminished[-] indicates a pyramid or cupola is removed from one or more faces of the solid in question.
  • Gyrate[*] indicates a cupola mounted on or featured in the solid in question is rotated such that different edges match up, as in the difference between ortho- and gyrobicupolae.

The last three operations—augmentation, diminution, and gyration—can be performed multiple times for certain large solids. Bi- & Tri- indicate a double and triple operation respectively. For example, a bigyrate solid has two rotated cupolae, and a tridiminished solid has three removed pyramids or cupolae.

In certain large solids, a distinction is made between solids where altered faces are parallel and solids where altered faces are oblique. Para- indicates the former, that the solid in question has altered parallel faces, and meta- the latter, altered oblique faces. For example, a parabiaugmented solid has had two parallel faces augmented, and a metabigyrate solid has had 2 oblique faces gyrated.

The last few Johnson solids have names based on certain polygon complexes from which they are assembled. These names are defined by Johnson[2] with the following nomenclature:

  • A lune is a complex of two triangles attached to opposite sides of a square.
  • Spheno- indicates a wedgelike complex formed by two adjacent lunes. Dispheno- indicates two such complexes.
  • Hebespheno- indicates a blunt complex of two lunes separated by a third lune.
  • Corona is a crownlike complex of eight triangles.
  • Megacorona is a larger crownlike complex of 12 triangles.
  • The suffix -cingulum indicates a belt of 12 triangles.

Enumeration

Pyramids, cupolae, and rotundas

The first 6 Johnson solids are pyramids, cupolae, or rotundas with at most 5 lateral faces. Pyramids and cupolae with 6 or more lateral faces are coplanar and are hence not Johnson solids.

Pyramids

The first two Johnson solids, J1 and J2, are pyramids. The triangular pyramid is the regular tetrahedron, so it is not a Johnson solid. They represent sections of regular polyhedra.

Regular 3> T J1 4> J2 5>
Triangular pyramid
(Tetrahedron)
Square pyramid Pentagonal pyramid
Tetrahedron.png Square pyramid.png Pentagonal pyramid.png
Tetrahedron flat.svg Johnson solid 1 net.png Johnson solid 2 net.png
Related regular polyhedra
Tetrahedron Octahedron Icosahedron
Tetrahedron.png Octahedron.png Icosahedron.png

Cupolae and rotunda

The next four Johnson solids are three cupolae and one rotunda. They represent sections of uniform polyhedra.

Modified pyramids

Johnson solids 7 to 17 are derived from pyramids.

Elongated and gyroelongated pyramids

In the gyroelongated triangular pyramid, three pairs of adjacent triangles are coplanar and form non-square rhombi, so it is not a Johnson solid.

Bipyramids

The square bipyramid is the regular octahedron, while the gyroelongated pentagonal bipyramid is the regular icosahedron, so they are not Johnson solids. In the gyroelongated triangular bipyramid, six pairs of adjacent triangles are coplanar and form non-square rhombi, so it is also not a Johnson solid.

Modified cupolae and rotundas

Johnson solids 18 to 48 are derived from cupolae and rotundas.

Elongated and gyroelongated cupolae and rotundas

Bicupolae

The triangular gyrobicupola is an Archimedean solid (in this case the cuboctahedron), so it is not a Johnson solid.

Cupola-rotundas and birotundas

The pentagonal gyrobirotunda is an Archimedean solid (in this case the icosidodecahedron), so it is not a Johnson solid.

Cupola-rotunda Birotunda
J32 5cr J33 5cr* J34 5rr aD* Semiregular
Pentagonal orthocupolarotunda Pentagonal gyrocupolarotunda Pentagonal orthobirotunda Pentagonal gyrobirotunda
(icosidodecahedron)
Pentagonal orthocupolarotunda.png Pentagonal gyrocupolarotunda.png Pentagonal orthobirotunda.png Icosidodecahedron.png
Johnson solid 32 net.png Johnson solid 33 net.png Johnson solid 34 net.png Icosidodecahedron flat.svg
Augmented from polyhedra
Pentagonal cupola
Pentagonal rotunda
Pentagonal rotunda
Pentagonal cupola.png Pentagonal rotunda.png Pentagonal rotunda.png

Elongated bicupolae

The elongated square orthobicupola is an Archimedean solid (in this case the rhombicuboctahedron), so it is not a Johnson solid.

Elongated cupola-rotundas and birotundas

Gyroelongated bicupolae, cupola-rotundas, and birotundas

These Johnson solids have 2 chiral forms.

Augmented prisms

Johnson solids 49 to 57 are built by augmenting the sides of prisms with square pyramids.

J8 and J15 would also fit here, as an augmented square prism and biaugmented square prism.

Modified Platonic solids

Johnson solids 58 to 64 are built by augmenting or diminishing Platonic solids.

Augmented dodecahedra

Diminished and augmented diminished icosahedra

Diminished icosahedron Augmented tridiminished icosahedron
J11
(Repeated)
Uniform J62 I-/ J63 I--- J64 I---+
Diminished icosahedron
(Gyroelongated pentagonal pyramid)
Parabidiminished icosahedron
(Pentagonal antiprism)
Metabidiminished icosahedron Tridiminished icosahedron Augmented tridiminished icosahedron
Gyroelongated pentagonal pyramid.png Pentagonal antiprism.png Metabidiminished icosahedron.png Tridiminished icosahedron.png Augmented tridiminished icosahedron.png
Johnson solid 11 net.png Johnson solid 62 net.png Johnson solid 63 net.png Johnson solid 64 net.png

Modified Archimedean solids

Johnson solids 65 to 83 are built by augmenting, diminishing or gyrating Archimedean solids.

Augmented Archimedean solids

Gyrate and diminished rhombicosidodecahedra

J37 would also appear here as a duplicate (it is a gyrate rhombicuboctahedron).

Other gyrate and diminished archimedean solids

Other archimedean solids can be gyrated and diminished, but they all result in previously counted solids.

J27 J3 J34 J6 J37 J19 Uniform
Gyrate cuboctahedron
(triangular orthobicupola)
Diminished cuboctahedron
(triangular cupola)
Gyrate icosidodecahedron
(pentagonal orthobirotunda)
Diminished icosidodecahedron
(pentagonal rotunda)
Gyrate rhombicuboctahedron
(elongated square gyrobicupola)
Diminished rhombicuboctahedron
(elongated square cupola)
Bidiminished rhombicuboctahedron
(octagonal prism)
Triangular orthobicupola.png Triangular cupola.png Pentagonal orthobirotunda.png Pentagonal rotunda.png Elongated square gyrobicupola.png Elongated square cupola.png Octagonal prism.png
Johnson solid 27 net.png Johnson solid 3 net.png Johnson solid 34 net.png Johnson solid 6 net.png Johnson solid 37 net.png Johnson solid 19 net.png
Gyrated or diminished from polyhedra
Cuboctahedron Icosidodecahedron Rhombicuboctahedron
Cuboctahedron.png Icosidodecahedron.png Small rhombicuboctahedron.png

Elementary solids

Johnson solids 84 to 92 are not derived from "cut-and-paste" manipulations of uniform solids.

Snub antiprisms

The snub antiprisms can be constructed as an alternation of a truncated antiprism. The gyrobianticupolae are another construction for the snub antiprisms. Only snub antiprisms with at most 4 sides can be constructed from regular polygons. The snub triangular antiprism is the regular icosahedron, so it is not a Johnson solid.

J84 Regular J85
Snub disphenoid
ss{2,4}
Icosahedron
ss{2,6}
Snub square antiprism
ss{2,8}
Digonal gyrobianticupola Triangular gyrobianticupola Square gyrobianticupola
Snub digonal antiprism.png Snub triangular antiprism.png Snub square antiprism colored.png
Snub disphenoid net snubcoloring.png Snub triangular antiprism net.png Snub square antiprism net snubcoloring.png

Others

Classification by types of faces

Triangle-faced Johnson solids

Five Johnson solids are deltahedra, with all equilateral triangle faces:

Triangle and square-faced Johnson solids

Twenty four Johnson solids have only triangle or square faces:

Triangle and pentagon-faced Johnson solids

Eleven Johnson solids have only triangle and pentagon faces:

Triangle, square, and pentagon-faced Johnson solids

Twenty Johnson solids have only triangle, square, and pentagon faces:

Triangle, square, and hexagon-faced Johnson solids

Eight Johnson solids have only triangle, square, and hexagon faces:

Triangle, square, and octagon-faced Johnson solids

Five Johnson solids have only triangle, square, and octagon faces:

Triangle, pentagon, and decagon-faced Johnson solids

Two Johnson solids have only triangle, pentagon, and decagon faces:

Triangle, square, pentagon, and hexagon-faced Johnson solids

Only one Johnson solid has triangle, square, pentagon, and hexagon faces:

Triangle, square, pentagon, and decagon-faced Johnson solids

Sixteen Johnson solids have only triangle, square, pentagon, and decagon faces:

Circumscribable Johnson solids

25 of the Johnson solids have vertices that exist on the surface of a sphere: 1–6,11,19,27,34,37,62,63,72–83. All of them can be seen to be related to a regular or uniform polyhedra by gyration, diminishment, or dissection.[3]

See also

References

  • Johnson, Norman W. (1966). "Convex Solids with Regular Faces". Canadian Journal of Mathematics 18: 169–200. doi:10.4153/cjm-1966-021-8. ISSN 0008-414X.  Contains the original enumeration of the 92 solids and the conjecture that there are no others.
  • Zalgaller, Victor A. (1967). "Convex Polyhedra with Regular Faces" (in ru). Zap. Nauchn. Semin. Leningr. Otd. Mat. Inst. Steklova 2: 1–221. ISSN 0373-2703.  The first proof that there are only 92 Johnson solids. English translation: Zalgaller, Victor A. (1969). "Convex Polyhedra with Regular Faces". Seminars in Mathematics, V. A. Steklov Math. Inst., Leningrad (Consultants Bureau) 2. ISSN 0080-8873. 
  • Anthony Pugh (1976). Polyhedra: A visual approach. California: University of California Press Berkeley. ISBN 0-520-03056-7.  Chapter 3 Further Convex polyhedra
  • Timofeenko, A.V. (2009). "The Non-Platonic and Non-Archimedean Noncomposite Polyhedra" (in en). J. Math. Sci. 162 (5): 710–729. doi:10.1007/s10958-009-9655-0.  [1]

olyhedra." J. Math. Sci. 162, 710-729, 2009.

External links