Chemistry:Barium ferrate

From HandWiki
Barium ferrate
Bariumferrat-2.JPG
Structural formula of barium(2+)
Wireframe model of aromatised ferrate
Names
IUPAC name
Barium ferrate(VI)
Other names
Barium ferrate(2-)
Identifiers
3D model (JSmol)
ChemSpider
Properties
BaFeO4
Molar mass 257,1646 g/mol
Appearance Dark red, opaque crystals
insoluble
Structure
orthorhombic
Pnma, No. 62[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is ☑Y☒N ?)
Infobox references
Tracking categories (test):

Barium ferrate is the chemical compound of formula BaFeO4. This is a rare compound containing iron in the +6 oxidation state.[2] The ferrate(VI) ion has two unpaired electrons, making it paramagnetic.[3] It is isostructural with BaSO4, and contains the tetrahedral [FeO4]2− anion.[4]

Structure

The ferrate(VI) anion is paramagnetic due to its two unpaired electrons and it has a tetrahedral molecular geometry.[3]

X-ray diffraction has been used to determine the orthorhombic unit cell structure[1] (lattice vectors a ≠ b ≠ c, interaxial angles α=β=γ=90°)[5] of nanocrystalline BaFeO4. It crystallized in the Pnma space group (point group: D2h) with lattice parameters a = 0.8880 nm, b = 0.5512 nm and c = 0.7214 nm.[1] The accuracy of the X-Ray diffraction data has been verified by the lattice fringe intervals from High-Resolution Transmission Electron Microscopy (HRTEM) and cell parameters calculated from Selected Area Diffraction (SAED).[1]

BaFeO4 Crystal structure[6]

Characterization

Infrared absorbance peaks of barium ferrate are observed at 870, 812, 780 cm−1.[7]

IR Spectrum of BaFeO4 showing characteristic peaks[8]

BaFeO4 follows the Curie–Weiss law and has a magnetic moment of (2.92 ± 0.03) × 10−23 A m2 (3.45 ± 0.1 BM) with a Weiss constant of −89 K.[9]

Preparation and chemistry

Barium ferrate(VI) can be prepared by both wet and dry synthetic methods. Dry synthesis is usually performed using a thermal technique,[7] such as by heating barium hydroxide and iron(II) hydroxide in the presence of oxygen to about 800 to 900 °C.[10]

Ba(OH)2 + Fe(OH)2 + O2 → BaFeO4 + 2 H2O

Wet methods employ both chemical and electrochemical techniques. For example, the ferrate anion forms when a suitable iron salt is placed in alkaline conditions and a strong oxidising agent, such as sodium hypochlorite, is added.[11]

2 Fe(OH)3 + 3 OCl− + 4 OH− → 2 FeO2−4 + 5 H2O + 3 Cl−

Barium ferrate is then precipitated from solution by adding a solution of a barium(II) salt.[11] Addition of a soluble barium salt to an alkali metal ferrate solution produces a maroon precipitate of barium ferrate, a crystal which has the same structure as barium chromate and has approximately the same solubility.[12] Barium ferrate has also been prepared by adding barium oxide to a mixture sodium hypochlorite and ferric nitrate at room temperature (or 0 °C).[13] The purity of the product can be improved by carrying out the reaction at low temperature in the absence of carbon dioxide and by rapidly filtering and drying the precipitate, reducing the coprecipitation of barium hydroxide and barium carbonate as impurities.[12]

Uses

Barium ferrate is an oxidizing agent and is used as an oxidizing reagent in organic syntheses. Its other applications include removal of color, removal of cyanide, killing bacteria and contaminated and waste water treatment.[7]

Salts of ferrate(VI) are energetic cathode materials in "super-iron" batteries. Cathodes containing ferrate(VI) compounds are referred to as "super-iron" cathodes due to their highly oxidized iron basis, multiple electron transfer, and high intrinsic energy. Among all ferrate(VI) salts, barium ferrate sustains unusually facile charge transfer, which is important for the high power domain of alkaline batteries.[8]

Reactions

Barium ferrate is the most stable of the ferrate(VI) compounds. It can be prepared in its purest state and has the most definite composition. Barium ferrate can be easily decomposed by all soluble acids, including carbonic acid. If carbon dioxide is passed through water on which hydrated barium ferrate is suspended, barium ferrate will decompose completely to form barium carbonate, ferric hydroxide and oxygen gas. Alkaline sulfates decompose barium ferrate that has not been dried, forming barium sulfate, ferric hydroxide and oxygen gas.

See also

References

  1. ↑ 1.0 1.1 1.2 1.3 Ni, Xiao-Min; Ji, Ming-Rong; Yang, Zhi-Ping; Zheng, Hua-Gui (2004). "Preparation and structure characterization of nanocrystalline BaFeO4". Journal of Crystal Growth 261 (1): 82–86. doi:10.1016/j.jcrysgro.2003.09.024. Bibcode: 2004JCrGr.261...82N. 
  2. ↑ Briggs, J. G. R. (2005). Longman A-level course in chemistry (4th ed.). Pearson Education South Asia. pp. 536. ISBN 978-981-4105-08-8. 
  3. ↑ 3.0 3.1 Wiberg, Egon; Wiberg, Nils; Holleman, Arnold (2001). Inorganic chemistry. Academic Press. pp. 1457–1458. ISBN 978-0-12-352651-9. 
  4. ↑ Wells, A.F. (1986). Structural inorganic chemistry (5th ed.). Oxford [Oxfordshire]: Clarendon Press. ISBN 978-0-19-855370-0. 
  5. ↑ "IUCr". http://www.iucr.org/education/pamphlets/13/full-text. 
  6. ↑ Ropp, Richard C. (2012). Encyclopedia of the Alkaline Earth Compounds. Newnes Press. ISBN 9780444595539. https://books.google.com/books?id=yZ786vEild0C. 
  7. ↑ 7.0 7.1 7.2 Henry-Chase, Adonica; Bhushan Tewari, Brij (2013). "Use to Ferrate (VI) A Green Chemical for the Environment Remediation". Revista Boliviana de Química 30 (1): 13–23. ISSN 0250-5460. http://www.bolivianchemistryjournal.org/QUIMICA%202013%20PDF/3_Environmental_remediation.pdf. 
  8. ↑ 8.0 8.1 Licht, Stuart; Naschitz, Vera; Wang, Baohui (2002). "Rapid chemical synthesis of the barium ferrate super-iron Fe (VI) compound, BaFeO4". Journal of Power Sources 109 (1): 67–70. doi:10.1016/s0378-7753(02)00041-1. Bibcode: 2002JPS...109...67L. 
  9. ↑ Audette, R. J.; Quail, J. W. (1972). "Potassium, rubidium, cesium, and barium ferrates(VI). Preparations, infrared spectra, and magnetic susceptibilities". Inorganic Chemistry 11 (8): 1904–1908. doi:10.1021/ic50114a034. 
  10. ↑ Sharma, R. K. (2007). "Stabilisation of Fe (VI)". Textbook of Coordination Chemistry. New Delhi: Discovery Publishing House. p. 124. ISBN 9788183562232. https://books.google.com/books?id=YpRvQd_7dgwC&pg=PA124. 
  11. ↑ 11.0 11.1 Wulfsberg, Gary (1991). "pH and the stability of high oxidation states; Syntheses of oxo anions and their use as oxidizing agents". Principles of Descriptive Inorganic Chemistry. Sausalito, CA: University Science Books. pp. 142–143. ISBN 9780935702668. https://books.google.com/books?id=JoNUVLrNg14C&pg=PA142. 
  12. ↑ 12.0 12.1 Gump, J. R.; Wagner, W. F.; Schreyer, J. M. (1954). "Preparation and analysis of barium ferrate(VI)". Analytical Chemistry 26 (12): 1957. doi:10.1021/ac60096a027. ISSN 0003-2700. 
  13. ↑ Herber, Rolfe H.; Johnson, David (1979). "Lattice dynamics and hyperfine interactions in M2FeO4 (M = K+, Rb+, Cs+) and M'FeO4 (M' = Sr2+, Ba2+)". Inorganic Chemistry 18 (10): 2786–2790. doi:10.1021/ic50200a030. 



Retrieved from "https://handwiki.org/wiki/index.php?title=Chemistry:Barium_ferrate&oldid=3333396"