Grand antiprism

From HandWiki
Short description: Uniform 4-polytope bounded by 320 cells
Grand antiprism
Grand antiprism.png
(Schlegel diagram wireframe)
Type Uniform 4-polytope
Uniform index 47
Cells 100+200 (3.3.3) Tetrahedron.png
20 (3.3.3.5)Pentagonal antiprism.png
Faces 20 {5}
700 {3}
Edges 500
Vertices 100
Vertex figure Sphenocorona
Grand antiprism verf.png
Symmetry group Ionic diminished Coxeter group 10,2+,10 of order 400
Properties convex
Grand antiprism net.png
A net showing two disjoint rings of 10 antiprisms. 200 tetrahedra (yellow) are in face contact with the antiprisms and 100 tetrahedra (red) contact only other tetrahedra.

In geometry, the grand antiprism or pentagonal double antiprismoid is a uniform 4-polytope (4-dimensional uniform polytope) bounded by 320 cells: 20 pentagonal antiprisms, and 300 tetrahedra. It is an anomalous, non-Wythoffian uniform 4-polytope, discovered in 1965 by Conway and Guy.[1][2] Topologically, under its highest symmetry, the pentagonal antiprisms have D5d symmetry and there are two types of tetrahedra, one with S4 symmetry and one with Cs symmetry.

Alternate names

Structure

20 stacked pentagonal antiprisms occur in two disjoint rings of 10 antiprisms each. The antiprisms in each ring are joined to each other via their pentagonal faces. The two rings are mutually perpendicular, in a structure similar to a duoprism.

The 300 tetrahedra join the two rings to each other, and are laid out in a 2-dimensional arrangement topologically equivalent to the 2-torus and the ridge of the duocylinder. These can be further divided into three sets. 100 face mate to one ring, 100 face mate to the other ring, and 100 are centered at the exact midpoint of the duocylinder and edge mate to both rings. This latter set forms a flat torus and can be "unrolled" into a flat 10×10 square array of tetrahedra that meet only at their edges and vertices. See figure below.

100 tetrahedra in a 10×10 array forming the Clifford torus boundary in the 600-cell and grand antiprism.

In addition the 300 tetrahedra can be partitioned into 10 disjoint Boerdijk–Coxeter helices of 30 cells each that close back on each other. The two pentagonal antiprism tubes, plus the 10 BC helices, form an irregular discrete Hopf fibration of the grand antiprism that Hopf maps to the faces of a pentagonal antiprism. The two tubes map to the two pentagonal faces and the 10 BC helices map to the 10 triangular faces.

The structure of the grand antiprism is analogous to that of the 3-dimensional antiprisms. However, the grand antiprism is the only convex uniform analogue of the antiprism in 4 dimensions (although the 16-cell may be regarded as a regular analogue of the digonal antiprism). The only nonconvex uniform 4-dimensional antiprism analogue uses pentagrammic crossed-antiprisms instead of pentagonal antiprisms, and is called the pentagrammic double antiprismoid.

Vertex figure

The vertex figure of the grand antiprism is a sphenocorona or dissected regular icosahedron: a regular icosahedron with two adjacent vertices removed. In their place 8 triangles are replaced by a pair of trapezoids, edge lengths φ, 1, 1, 1 (where φ is the golden ratio), joined together along their edge of length φ, to give a tetradecahedron whose faces are the 2 trapezoids and the 12 remaining equilateral triangles.

Tetrahedron vertfig.png
12 (3.3.3)
Pentagonal antiprism vertfig.png
2 (3.3.3.5)
Dissected regular icosahedron.png
Dissected regular icosahedron

Construction

The regular 600-cell can be decomposed with the symmetry of the grand antiprism, with each of the 20 blue pentagonal antiprisms being divided into 15 regular tetrahedra.

The grand antiprism can be constructed by diminishing the 600-cell: subtracting 20 pyramids whose bases are three-dimensional pentagonal antiprisms. Conversely, the two rings of pentagonal antiprisms in the grand antiprism may be triangulated by 10 tetrahedra joined to the triangular faces of each antiprism, and a circle of 5 tetrahedra between every pair of antiprisms, joining the 10 tetrahedra of each, yielding 150 tetrahedra per ring. These combined with the 300 tetrahedra that join the two rings together yield the 600 tetrahedra of the 600-cell.

This diminishing may be realized by removing two rings of 10 vertices from the 600-cell, each lying in mutually orthogonal planes. Each ring of removed vertices creates a stack of pentagonal antiprisms on the convex hull. This relationship is analogous to how a pentagonal antiprism can be constructed from an icosahedron by removing two opposite vertices, thereby removing 5 triangles from the opposite 'poles' of the icosahedron, leaving the 10 equatorial triangles and two pentagons on the top and bottom.

(The snub 24-cell can also be constructed by another diminishing of the 600-cell, removing 24 icosahedral pyramids. Equivalently, this may be realized as taking the convex hull of the vertices remaining after 24 vertices, corresponding to those of an inscribed 24-cell, are removed from the 600-cell.)

Alternatively, it can also be constructed from the decagonal ditetragoltriate (the convex hull of two perpendicular nonuniform 10-10 duoprisms where the ratio of the two decagons are in the golden ratio) via an alternation process. The decagonal prisms alternate into pentagonal antiprisms, the rectangular trapezoprisms alternate into tetrahedra with two new regular tetrahedra (representing a non-corealmic triangular bipyramid) created at the deleted vertices. This is the only uniform solution for the p-gonal double antiprismoids alongside its conjugate, the pentagrammic double antiprismoid from the decagrammic ditetragoltriate.

Orthogonal projections
600-cell Grand antiprism
H4 Coxeter plane
600-cell graph H4.svg Grand antiprism ortho-30-gon.png
20-gonal
600-cell t0 p20.svg Grand antiprism 20-gonal orthogonal projection.png
H3 Coxeter plane (slight offset)
Grand antiprism 600-cell H3.png

Projections

These are two perspective projections, projecting the polytope into a hypersphere, and applying a stereographic projection into 3-space.

Stereographic grand antiprism.png
Wireframe, viewed down one of the pentagonal antiprism columns.
Stereographic grand antiprism faces.png
with transparent triangular faces
Ortho solid 963-uniform polychoron grand antiprism.png
Orthographic projection
Centered on hyperplane of an antiprism in one of the two rings.
GrandAntiPrism-3DOrtho-30.png
3D orthographic projection
of 100 of 120 600-cell vertices and 500 edges {488 of 1/2 (3-Sqrt[5]) and 12 of 2/(3+Sqrt[5])}.

See also

Notes

  1. J.H. Conway and M.J.T. Guy: Four-Dimensional Archimedean Polytopes, Proceedings of the Colloquium on Convexity at Copenhagen, page 38 und 39, 1965. (Michael Guy is son of Richard K. Guy)
  2. Conway, 2008, p.402-403 The Grand Antiprism
  3. Klitzing, Richard. "4D convex polychora Grand antiprism". https://bendwavy.org/klitzing/dimensions/../incmats/gap.htm. 

References

External links

Fundamental convex regular and uniform polytopes in dimensions 2–10
Family An Bn I2(p) / Dn E6 / E7 / E8 / F4 / G2 Hn
Regular polygon Triangle Square p-gon Hexagon Pentagon
Uniform polyhedron Tetrahedron OctahedronCube Demicube DodecahedronIcosahedron
Uniform 4-polytope 5-cell 16-cellTesseract Demitesseract 24-cell 120-cell600-cell
Uniform 5-polytope 5-simplex 5-orthoplex5-cube 5-demicube
Uniform 6-polytope 6-simplex 6-orthoplex6-cube 6-demicube 122221
Uniform 7-polytope 7-simplex 7-orthoplex7-cube 7-demicube 132231321
Uniform 8-polytope 8-simplex 8-orthoplex8-cube 8-demicube 142241421
Uniform 9-polytope 9-simplex 9-orthoplex9-cube 9-demicube
Uniform 10-polytope 10-simplex 10-orthoplex10-cube 10-demicube
Uniform n-polytope n-simplex n-orthoplexn-cube n-demicube 1k22k1k21 n-pentagonal polytope
Topics: Polytope familiesRegular polytopeList of regular polytopes and compounds