Chemistry:Tellurium hexafluoride
| |||
Identifiers | |||
---|---|---|---|
3D model (JSmol)
|
|||
EC Number |
| ||
PubChem CID
|
|||
UNII | |||
| |||
| |||
Properties | |||
TeF6 | |||
Molar mass | 241.590 g/mol | ||
Appearance | colorless gas | ||
Odor | repulsive odor | ||
Density | 0.0106 g/cm3 (-10 °C) 4.006 g/cm3 (-191 °C) | ||
Melting point | −38.9 °C (−38.0 °F; 234.2 K)[2] | ||
Boiling point | −37.6 °C (−35.7 °F; 235.6 K)[2] | ||
decomposes | |||
Vapor pressure | >1 atm (20°C)[1] | ||
−66.0·10−6 cm3/mol | |||
Refractive index (nD)
|
1.0009 | ||
Structure | |||
Orthorhombic, oP28 | |||
Pnma, No. 62 | |||
octahedral (Oh) | |||
0 | |||
Thermochemistry | |||
Heat capacity (C)
|
117.6 J/(mol K) | ||
Std enthalpy of
formation (ΔfH⦵298) |
-1318 kJ/mol | ||
Hazards | |||
Lethal dose or concentration (LD, LC): | |||
LCLo (lowest published)
|
5 ppm (rat, 4 hr) 5 ppm (mouse, 1 hr) 5 ppm (rabbit, 4 hr) 5 ppm (guinea pig, 4 hr)[3] | ||
NIOSH (US health exposure limits): | |||
PEL (Permissible)
|
TWA 0.02 ppm (0.2 mg/m3)[1] | ||
REL (Recommended)
|
TWA 0.02 ppm (0.2 mg/m3)[1] | ||
IDLH (Immediate danger)
|
1 ppm[1] | ||
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |||
verify (what is ?) | |||
Infobox references | |||
Tellurium hexafluoride is the inorganic compound of tellurium and fluorine with the chemical formula TeF6. It is a colorless, highly toxic gas with an unpleasant odor.[4]
Preparation
Tellurium hexafluoride can be prepared by treating tellurium with fluorine gas at 150 °C.[4][5] It can also be prepared by fluorination of TeO3 with bromine trifluoride. Upon heating, TeF4 disproportionates to give TeF6 and Te.[citation needed]
Properties
Tellurium hexafluoride is a highly symmetric octahedral molecule. Its physical properties resemble those of the hexafluorides of sulfur and selenium. It is less volatile, however, due to the increase in polarizability. At temperatures below −38 °C, tellurium hexafluoride condenses to a volatile white solid.
Reactivity
Tellurium hexafluoride is much more chemically reactive than SF6.[6] For example, TeF6 slowly hydrolyzes to Te(OH)6:
- TeF6 + 6 H2O → Te(OH)6 + 6 HF
Treatment of tellurium hexafluoride with tetramethylammonium fluoride (Me4NF) gives, sequentially, the hepta- and octafluorides:
- TeF6 + Me4NF → Me4NTeF7
- Me4NTeF7 + Me4NF → (Me4N)2TeF8
Further sources
- W.C. Cooper, Tellurium, Van Nostrand Reinhold Company, New York, USA, 1971.
- K.W. Bagnall, The Chemistry of Selenium, Tellurium and Polonium, Elsevier Publishing, New York, 1966.
- R.T. Sanderson, Chemical Periodicity, Reinhold, New York, USA, 1960.
- F. A. Cotton, G. Wilkinson, C.A. Murillo, and M. Bochmann; Advanced Inorganic Chemistry, John Wiley & Sons, 1999.
- G.J. Hathaway, N.H. Proctor, Chemical Hazards of the Workplace, 5th edition, Wiley-Interscience, New Jersey, 2004.
References
- ↑ 1.0 1.1 1.2 1.3 NIOSH Pocket Guide to Chemical Hazards. "#0588". National Institute for Occupational Safety and Health (NIOSH). https://www.cdc.gov/niosh/npg/npgd0588.html.
- ↑ 2.0 2.1 CRC Handbook of Chemistry and Physics, 90. Auflage, CRC Press, Boca Raton, Florida, 2009, ISBN:978-1-4200-9084-0, Section 4, Physical Constants of Inorganic Compounds, p. 4-95.
- ↑ "Tellurium hexafluoride (as Te)". Immediately Dangerous to Life and Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH). https://www.cdc.gov/niosh/idlh/7783804.html.
- ↑ 4.0 4.1 W. Kwasnik (1963). "Tellurium Hexafluoride". in G. Brauer. Handbook of Preparative Inorganic Chemistry, 2nd Ed.. 1. NY, NY: Academic Press. pp. 180.
- ↑ Yost, Don M. (2007). "Sulfur, Selenium, and Tellurium Hexafluorides". Inorganic Syntheses. 1. pp. 121–122. doi:10.1002/9780470132326.ch44. ISBN 978-0-470-13232-6.
- ↑ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
External links
Original source: https://en.wikipedia.org/wiki/Tellurium hexafluoride.
Read more |