Chemistry:Manganese(II) chloride

From HandWiki
Manganese(II) chloride
Manganese(II)-chloride-xtal-layer-top-infinite-3D-bs-17.png
ball-and-stick model of crystal packing
Cis-MnCl2(H2O)4.png
molecular structure
Manganese(II) chloride tetrahydrate.jpg
Tetrahydrate
Names
IUPAC names
Manganese(II) chloride
Manganese dichloride
Other names
Manganous chloride
hyperchloride of manganese
Identifiers
3D model (JSmol)
ChEMBL
ChemSpider
RTECS number
  • OO9625000
UNII
Properties
MnCl2
Molar mass 125.844 g/mol (anhydrous)
161.874 g/mol (dihydrate)
197.91 g/mol (tetrahydrate)
Appearance pink solid (tetrahydrate)
Density 2.977 g/cm3 (anhydrous)
2.27 g/cm3 (dihydrate)
2.01 g/cm3 (tetrahydrate)
Melting point 654 °C (1,209 °F; 927 K) (anhydrous)
dihydrate dehydrates at 135 °C
tetrahydrate dehydrates at 58 °C
Boiling point 1,225 °C (2,237 °F; 1,498 K)
63.4 g/100 ml (0 °C)
73.9 g/100 ml (20 °C)
88.5 g/100 ml (40 °C)
123.8 g/100 ml (100 °C)
Solubility slightly soluble in pyridine, soluble in ethanol
insoluble in ether
+14,350·10−6 cm3/mol
Structure
CdCl2
octahedral
Hazards
NFPA 704 (fire diamond)
Flammability code 0: Will not burn. E.g. waterHealth code 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformReactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no codeNFPA 704 four-colored diamond
0
2
0
Flash point Non-flammable
Lethal dose or concentration (LD, LC):
250-275 mg/kg (rat, oral)[citation needed]
1715 mg/kg (mouse, oral)[1]
Related compounds
Other anions
Manganese(II) fluoride
Manganese(II) bromide
Manganese(II) iodide
Other cations
Manganese(III) chloride
Technetium(IV) chloride
Rhenium(III) chloride
Rhenium(IV) chloride
Rhenium(V) chloride
Rhenium(VI) chloride
Related compounds
Chromium(II) chloride
Iron(II) chloride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is ☑Y☒N ?)
Infobox references

Manganese(II) chloride is the dichloride salt of manganese, MnCl2. This inorganic chemical exists in the anhydrous form, as well as the dihydrate (MnCl2·2H2O) and tetrahydrate (MnCl2·4H2O), with the tetrahydrate being the most common form. Like many Mn(II) species, these salts are pink, with the paleness of the color being characteristic of transition metal complexes with high spin d5 configurations.[2]

Preparation

Manganese chloride is produced by treating manganese(IV) oxide with concentrated hydrochloric acid.

MnO2 + 4 HCl → MnCl2 + 2 H2O + Cl2

This reaction was once used for the manufacture of chlorine. By carefully neutralizing the resulting solution with MnCO3, one can selectively precipitate iron salts, which are common impurities in manganese dioxide.[3]

Sample of anhydrous MnCl2.

In the laboratory, manganese chloride can be prepared by treating manganese metal or manganese(II) carbonate with hydrochloric acid:

Mn + 2 HCl + 4 H2O → MnCl2(H2O)4 + H2
MnCO3 + 2 HCl + 3 H2O → MnCl2(H2O)4 + CO2

Structures

Anhydrous MnCl2 adopts a layered cadmium chloride-like structure. The tetrahydrate consists of octahedral cis-Mn(H2O)4Cl2 molecules. The trans isomer, which is metastable, is also known.[4][5] The dihydrate MnCl2(H2O)2 is a coordination polymer. Each Mn center is coordinated to four doubly bridging chloride ligands. The octahedron is completed by a pair of mutually trans aquo ligands.[6]

Subunit of MnCl2(H2O)2 lattice.

Chemical properties

The hydrates dissolve in water to give mildly acidic solutions with a pH of around 4. These solutions consist of the metal aquo complex [Mn(H2O)6]2+.

It is a weak Lewis acid, reacting with chloride ions to produce a series of salts containing the following ions [MnCl3], [MnCl4]2−, and [MnCl6]4−.

Upon treatment with typical organic ligands, manganese(II) undergoes oxidation by air to give Mn(III) complexes. Examples include [Mn(EDTA)], [Mn(CN)6]3−, and [Mn(acetylacetonate)3]. Triphenylphosphine forms a labile 2:1 adduct:

MnCl2 + 2 Ph3P → [MnCl2(Ph3P)2]

Anhydrous manganese(II) chloride serves as a starting point for the synthesis of a variety of organomanganese compounds. For example, manganocene is prepared by reaction of MnCl2 with a solution of sodium cyclopentadienide in tetrahydrofuran (THF).

MnCl2 + 2 NaC5H5 → Mn(C5H5)2 + 2 NaCl

Similar reactions are used in the preparation of the antiknock compound methylcyclopentadienyl manganese tricarbonyl.[3]

Manganese chloride is a precursor to organomanganese reagents in organic chemistry.[7][8]

Manganese chloride is mainly used in the production of dry cell batteries.

Magnetism

Manganese(II) salts are paramagnetic. As such the presence of such salts profoundly affect NMR spectra.[9]

Natural occurrence

Scacchite is the natural, anhydrous form of manganese(II) chloride.[10]

Precautions

Manganism, or manganese poisoning, can be caused by long-term exposure to manganese dust or fumes.

References

  1. "Manganese compounds (as Mn)". Immediately Dangerous to Life and Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH). https://www.cdc.gov/niosh/idlh/7439965.html. 
  2. N. N. Greenwood, A. Earnshaw, Chemistry of the Elements, 2nd ed., Butterworth-Heinemann, Oxford, UK, 1997.
  3. 3.0 3.1 Reidies, Arno H. (2002), "Manganese Compounds", Ullmann's Encyclopedia of Industrial Chemistry, Weinheim: Wiley-VCH, doi:10.1002/14356007.a16_123, ISBN 978-3-527-30385-4 .
  4. Zalkin, Allan; Forrester, J. D.; Templeton, David H. (1964). "Crystal structure of manganese dichloride tetrahydrate". Inorganic Chemistry 3 (4): 529–33. doi:10.1021/ic50014a017. http://www.escholarship.org/uc/item/7vf7p79j. 
  5. A. F. Wells, Structural Inorganic Chemistry, 5th ed., Oxford University Press, Oxford, UK, 1984.
  6. Morosin, B.; Graeber, E. J. (1965). "Crystal structures of manganese(II) and iron(II) chloride dihydrate". Journal of Chemical Physics 42 (3): 898–901. doi:10.1063/1.1696078. Bibcode1965JChPh..42..898M. 
  7. Gérard Cahiez, François Chau, Bernard Blanchot (1999). "Regioselective Monoalkylation of Ketones Via Their Manganese Enolates: 2-Benzyl-6-Methylcyclohexanone from 2-Methylcyclohexanone". Organic Syntheses 76: 239. doi:10.15227/orgsyn.076.0239. 
  8. S. Marquais, M. Alami, and G. Cahiez (1995). "Manganese-Copper-Catalyzed Conjugate Addition of Organomagnesium Reagents to a,b-Ethylenic Ketones\: 2-(1,1-Dimethylpentyl)-5-methyl-cyclohexanone from Pulegone". Organic Syntheses 72: 135. doi:10.15227/orgsyn.072.0135. 
  9. Frohlich, Margret; Brecht, Volker; Peschka-Suss, Regine (January 2001), "Parameters influencing the determination of liposome lamellarity by 31P-NMR", Chemistry and Physics of Lipids 109 (1): 103–112, doi:10.1016/S0009-3084(00)00220-6, PMID 11163348 
  10. "Scacchite". https://www.mindat.org/min-3549.html. 

External links